Battery Room Monitoring

下载 (1.5 MB)

Introduction

ISA 100 WirelessA battery room is used to storage batteries for emergency power management in the plant. Each substation has battery room and the storage batteries are lead-acid batteries which must be maintained within specified operating temperature limits. Temperature management is important to ensure a long service life of the batteries especially for the plant in desert climates.

refineryReference: Lead Storage Battery

Benefits

  • Improved maintenance efficiency of storage batteries
  • Minimized installation cost, a single hop up to 5km minimized wireless infrastructures (extra repeaters)
  • Reduced system maintenance effort, battery life of 10 years with 30sec updates can be realized
  • Improved system availability, the gateway redundancy with one second switch over time can be realized
  • Improved future installation flexibility and usability, Backbone routers with Sky Mesh Method minimize infrastructure while maintaining high network reliability with low communication error rate
Yokogawa Sky Mesh Concept

Requirements

  • To gather temperature and A/C measurements of each battery room and to monitor them in central control room
  • All wireless transmitters to have redundant paths
  • Host interface must be compatible with existing 3rd party DCS
  • Minimize cost by reduced wireless infrastructure

Solution

Redundant gateways and access points were installed in a central control room. The wireless network has the availability to communicate with 24 battery rooms, over an area approximately 2 km2. In each battery room, an RTD sensor was installed for temperature monitoring and a mechanical flow switch was installed for A/C monitoring. Field and network redundancy ensured high availability of data. An OPC server with an open interface allowed for connecting to 3rd party DCS without any additional software.

Conclusion

Battery rooms are now under wireless monitoring. The redundant wireless system provides reliable network communication over 2 km2 area and cost savings were realized at over 75%. The emergency power monitoring system ensures that power is always available during a site safety event.

行业

相关产品&解决方案

YFGW410现场无线管理站

YFGW410现场无线管理站以国际自动化协会(ISA)的工业自动化无线通信标准ISA100.11a为基准。该产品具有符合ISA100.11a标准的系统管理/安全管理/网关功能,与现场无线接入点(YFGW510)和/或现场无线媒体转换器(YFGW610)组合,构成现场无线系统。

YFGW510/YFGW520现场无线接入点

YFGW510/YFGW520现场无线接入点以国际自动化协会(ISA)的工业自动化无线通信标准ISA100.11a为基准。该产品具有符合ISA标准的主干路由器功能,与现场无线管理站(YFGW410)和/或现场无线媒体转换器(YFGW610)组合,构成现场无线系统。

YTA510无线温度变送器

高性能温度变送器YTA510接收热电偶、RTD、欧姆或DC mV输入信号。该变送器通过无线信号传输过程变量以及设定参数。该变送器采用内置电池,由于无需硬接线,因此可降低安装成本。通信规格以ISA100.11a协议为基础。

YTMX580多点输入温度变送器

YTMX580最多可接收8点测量输入值,如热电偶(8种类型:K、E、J等)或RTD信号(3种类型:Pt100等),并将相应的测量输入值转换为无线信号。它也可以接收DC电压、电阻和4~20 mA DC信号输入。

现场无线

无线解决方案的灵活性可减少对基础设施的投入,同时可以对工厂运营有更深入的了解。

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

置顶
WeChat QR Code
横河电机(中国)有限公司
WeChat Recruiting QR Code
横河电机中国招聘