Temperature Monitoring by Wireless Communication at Furnace

Introduction

Electrical Furnaces used at steel mills to heat and melt metals, require a water cooling system to provide consistent and safe heating. If part of the cooling system fails, it can affect the quality of the product and also risk the safety of the facility and the operators.
For steady control, hundreds of temperature sensors can be installed around the furnace. However the sensor wiring is often damaged by the heating environment. The application also generates strong electrical noise which leads to erratic measurements making it difficult to apply proper control.

ISA100 WIRELESS
Electric furnace at steel mills

 

Proposal

To overcome the challenges associated with severe ambient condition or the presence of strong electrical noise, Yokogawa recommends a Field Wireless solution based on ISA100 Wireless technology.

  • Compared with wired data transition with long signal wires, the wireless data transmission is not susceptible to electrical noise.
  • Switching to wireless measurement reduces the labor and cost associated with ongoing replacement of wires near the harsh furnace environment.
  • Yokogawa’s Field Wireless solution provides better data quality for temperature control, reduced maintenance cost and improved product quality as a result of stable temperature control.

YFGW520 (Field Wireless Access Point) ,YFGW410 (Field Wireless Management Station)
YFGW520 (Field Wireless Access Point)
YFGW410 (Field Wireless Management Station)

YTMX580 Multi-Input Temperature Transmitter
YTMX580 Multi-Input Temperature Transmitter

 

Features of YOKOGAWA Field Wireless

  • YTMX580 is the multi-input temperature transmitter. One unit can support up to eight temperature sensors.
  • The data from YTMX580 can be transmitted up 500 meters line of site. Even in dense process piping without direct visibility to the next router, reliable communication of 50 meters can be achieved. These are the benefits of ISA100.11a protocol.
  • It is scalable up to 500 wireless units (including routers).
  • Coexistence with Wi-Fi: Robust, reliable communication

Wireless : Steady, Max. 500m / Wired : subject to noise issues

 

Other details of YOKOGAWA Field Wireless

Redundancy

Reliability of the wireless system is ensured by redundant wireless channels and devices. Redundancy achieves high-speed switching.

details of YOKOGAWA Field Wireless: Redundancy
Yokogawa Full Redundant System

Cyber security

With a variety of security functions including device authentication, message authentication, message freshness checks, and encryption, the field wireless network is protected from multiple types of cyber attacks.

Sky Mesh

A breakthrough method to increase reliable and optimize networks with 2.4GHz wireless communication, being suitable for plants and other locations. It supports long distance communication in trunk communication path, covering lots of IO with less routing devices, resulting to economical wireless network topologies.

Battery pack

Replaceable in hazardous area, max 10-year battery life depending on operating condition.

Battery pack, certified with explosion proof
Battery pack, certified with explosion proof

Looking for more information on our people, technology and solutions?

Contact Us  

相關產品&解決方案

  • YFGW410現場無線管理站

    YFGW410現場無線管理站具備符合ISA100.11a標準的系統管理/安全管理/網關功能,與現場無線接入點(YFGW520)和/或現場無線媒介轉換器(YFGW610)組合使用,可構建完整的現場無線系統。

    更多
  • YFGW520現場無線接入點

    YFGW520現場無線接入點具備基於ISA標準的骨干路由器功能,與現場無線管理站(YFGW410)和/或現場無線媒介轉換器(YFGW610)組合使用,可構建完整的現場無線系統。

    更多
  • YTMX580多點輸入溫度變送器

    YTMX580至多可接收8點測量輸入值,如熱電偶(8種類型:K、E、J等)或RTD信號(3種類型:Pt100等),並將相應的測量輸入值轉換為無線信號。它也可以接收DC電壓、電阻和4~20 mA DC信號輸入。

    更多
  • 無線網絡基礎設備

    橫河電機提供支持物聯網的ISA100兼容網關、接入點、媒介轉換器及管理站,助您構建契合需求的網絡系統。

    更多
  • 現場無線

    無線解決方案的靈活性可減少對基礎設施的投入,同時可以對工廠運營有更深入的了解。

    更多

置頂