Introduction
Electrical Furnaces used at steel mills to heat and melt metals, require a water cooling system to provide consistent and safe heating. If part of the cooling system fails, it can affect the quality of the product and also risk the safety of the facility and the operators.
For steady control, hundreds of temperature sensors can be installed around the furnace. However the sensor wiring is often damaged by the heating environment. The application also generates strong electrical noise which leads to erratic measurements making it difficult to apply proper control.
Proposal
To overcome the challenges associated with severe ambient condition or the presence of strong electrical noise, Yokogawa recommends a Field Wireless solution based on ISA100 Wireless technology.
- Compared with wired data transition with long signal wires, the wireless data transmission is not susceptible to electrical noise.
- Switching to wireless measurement reduces the labor and cost associated with ongoing replacement of wires near the harsh furnace environment.
- Yokogawa’s Field Wireless solution provides better data quality for temperature control, reduced maintenance cost and improved product quality as a result of stable temperature control.
YFGW520 (Field Wireless Access Point)
YFGW410 (Field Wireless Management Station)
YTMX580 Multi-Input Temperature Transmitter
Features of YOKOGAWA Field Wireless
- YTMX580 is the multi-input temperature transmitter. One unit can support up to eight temperature sensors.
- The data from YTMX580 can be transmitted up 500 meters line of site. Even in dense process piping without direct visibility to the next router, reliable communication of 50 meters can be achieved. These are the benefits of ISA100.11a protocol.
- It is scalable up to 500 wireless units (including routers).
- Coexistence with Wi-Fi: Robust, reliable communication
Other details of YOKOGAWA Field Wireless
Redundancy
Reliability of the wireless system is ensured by redundant wireless channels and devices. Redundancy achieves high-speed switching.
Yokogawa Full Redundant System
Cyber security
With a variety of security functions including device authentication, message authentication, message freshness checks, and encryption, the field wireless network is protected from multiple types of cyber attacks.
Sky Mesh
A breakthrough method to increase reliable and optimize networks with 2.4GHz wireless communication, being suitable for plants and other locations. It supports long distance communication in trunk communication path, covering lots of IO with less routing devices, resulting to economical wireless network topologies.
Battery pack
Replaceable in hazardous area, max 10-year battery life depending on operating condition.
Battery pack, certified with explosion proof
Looking for more information on our people, technology and solutions?
Contact UsIndustries
-
Iron & Steel
- Iron and steel industry
- Improve quality of products, manufacturing, and operation technologies
- Address environmental and energy-efficiency issues
- Create the ideal plant and evolve for mutual growth
-
Mining & Metal
Mining operations produce valuable minerals or geological materials from the Earth. Economical recovery often requires high throughput and high availability of the process with low operation costs, and stringent safety and environmental regulations.
Related Products & Solutions
-
YFGW410 Field Wireless Management Station
YFGW410 Field Wireless Management Station has system manager/security manager/gateway function based on ISA100.11a, and combining this with Field Wireless Access Point(YFGW510) and/or Field Wireless Media Converter(YFGW610) composes the field wireless system.
-
YFGW510 Field Wireless Access Point
YFGW510 Field Wireless Access Poin has backbone router function based on ISA, and combining this with Field Wireless Management Station (YFGW410) and/or Field Wireless Media Converter (YFGW610) composes the field wireless system.
-
YFGW520 Field Wireless Access Point
YFGW520 Field Wireless Access Poin has backbone router function based on ISA, and combining this with Field Wireless Management Station (YFGW410) and/or Field Wireless Media Converter (YFGW610) composes the field wireless system.
-
YTMX580 Multi-Input Temperature Transmitter
YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input.
-
Field Wireless
Reduce infrastructure investment and increase plant operation insights
-
Wireless Infrastructure
Yokogawa offers an IoT Enabled ISA100 compliant Gateway, a Access Point, a Media Converter, and a Management Station. All to help design a network to meet your needs.
-
Wireless Temperature Transmitters
Yokogawa offers the dual-input YTA510 and the multi-point YMTX580 temperature transmitters.