说明: 本产品于2022年3月31日停止生产。
F Series signal conditioners are compact, space-saving (24 mm width) signal conditioners with front panel terminals. The microprocessor based models provide field configuration capability and minimum stock of spares. The installation is either DIN-Rail, Rack or Wall mounting, and the power supply is 24 V DC.
详细介绍
Compact size, versatile mounting, and microprocessor based high performance capabilities makes the F Series an excellent choice for almost every application. It is also excellent as a front end to a DCS, PLC or other control system.
- Compact design for space saving. The external dimensions are 72 mm(H) x 24 mm(W) x 127 mm(D).
- Field configuration (FA5, FH2, FH5, FM1, FR5, FT5, FS1)
A field configuration of the microprocessor based F Series are possible to set, change and monitor the range, zero/span, burnout, etc. from your PC (with VJ77 PC-based parameters setting tool). - Minimize the stock of spare units
For example, model FT5 thermocouple input signal conditioners can be set their input type, input range, etc. by PC (with VJ77). One unit of FT5 can support 8 types of thermocouples. - Wired through the front-panel terminals, so the conditioner can be checked even if the lines are live.
- Versatile I/O specifications meeting a wide range of applications.
- Compliance with safety standard
CSA mark is available for models FA0A, FA1A/V, FA5A/V, FC0A, FH0V, FH1A/V, FH5A/V, FM1A/V, FP1P, FS1A/V, FR5A/V and FT5A/V.
-
【Support Information】List of RoHS
This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.
参考
常见问题
When I connect an open collector output conditioner with a counter or relay, it doesn't work.
(ns-faq-juxta-11017-spec)
常见问题
How is a handy terminal (JHT200) connected to a conditioner that allows range changes?
(ns-faq-juxta-11002-setting)
常见问题
There are Pt100 Ω standards of IPTS-68, ITS-90, and JPt100 Ω, but what is the difference between them?
(ns-faq-juxta-11013-other)
常见问题
How many instruments can be connected to a voltage output terminal (1–5 VDC)?
(ns-faq-juxta-11014-spec)
常见问题
How many instruments can be connected to a current output terminal (4–20 mADC)?
(ns-faq-juxta-11015-spec)
常见问题
常见问题
There may be a 63% or 90% response depending on the manufacturer, but how should I compare these?
(ns-faq-juxta-11020-other)
常见问题
常见问题
Are there any models that allow me to set up an upper or lower limit limiter on the instrument's input signal?
(ns-faq-juxta-11036-select)
常见问题
Does the JUXTA VJ series support CCC and GB standards? Can it be used in China?
(ns-faq-juxta-11038-other)
常见问题
I purchased an isolator with a 4-20 mA current input specification. Can I use it with voltages of 1-5 VDC?
(ns-faq-juxta-11049-connect)
常见问题
常见问题
There's no output with a thermocouple temperature converter. What should I do?
(ns-faq-juxta-11057-connect)
常见问题
There's no output with an RTD temperature converter. What should I do?
(ns-faq-juxta-11058-connect)
常见问题
There's no output with a pulse signal repeater and pulse rate converter. What should I do?
(ns-faq-juxta-11059-connect)
常见问题
There's no output with an analog/pulse converter. What should I do?
(ns-faq-juxta-11060-connect)
常见问题
There is no output with a pulse/analog converter. What should I do?
(ns-faq-juxta-11061-connect)
常见问题
I purchased an isolator, and a resistor came with it. What is the resistor used for?
(ns-faq-juxta-11065-spec)
常见问题
下载
使用说明书
- FA0A Output Isolator (Voltage Input/Current Output Type) (356 KB)
- Model FPSU Power Supply Unit (505 KB)
- FP1P Pulse Repeater (777 KB)
- FA1A, FA1V Distributor (359 KB)
- FA5A, FA5V Distributor (with Square Root Extractor) (729 KB)
- FC0A Output Isolator (133 KB)
- FF1T 2 Wire P/E Transducer (129 KB)
- FH0V Output Isolator (Voltage I/O Type) (355 KB)
- FH2A, FH2V Isolator (Free Range Type) (663 KB)
- FH1A, FH1V Isolator (359 KB)
- FH5A, FH5V Isolator (with Square Root Extractor) (682 KB)
- FM1A, FM1V Isolator (mV DC Input, Free Range Type) (735 KB)
- FR5A, FR5V RTD Converter (Free Range Type) (1.4 MB)
- FS1A, FS1V Potentiometer Converter (Free Range Type) (698 KB)
- FT5A, FT5V Thermocouple Converter (Free Range Type) (1.4 MB)
- FVDV Voltage Divider (99 KB)
- *Discontinued: Model X025 Marshalling Nest for MAC2 card (103 KB)
- *Discontinued: Model X015 Marshalling Nest for VM1/VM2/VM4/PM1 card (110 KB)
- *Discontinued: Model FTF-16 Model FTF-08 Model FTF-04 Power Distributor Unit(with Fuse) (89 KB)
- *Discontinued: FTU-16, FTU-08, FTU-04 Power Distributor Unit (83 KB)
一般规格书
- FP1P (98 KB)
- FA0A (268 KB)
- FA1A, FA1V Distributor (285 KB)
- Model FPSU Power Supply Unit (252 KB)
- FA5A, FA5V Distributor (with Square Root Extractor) (334 KB)
- FH0V (269 KB)
- FF1T P/E Transducer (2 Wire Type) (80 KB)
- FH1A, FH1V (275 KB)
- FH2A, FH2V Isolator (Free Range Type) (299 KB)
- FH5A, FH5V Isolator (with Square Root Extractor) (323 KB)
- FM1A, FM1V Isolator (mV DC Input, Free Range Type) (304 KB)
- FR5A, FR5V RTD Converter (Free Range Type) (314 KB)
- FS1A, FS1V Potentiometer Converter (Free Range Type) (312 KB)
- FT5A, FT5V Thermocouple Converter (Free Range Type) (305 KB)
- *Discontinued: Model FVDV Voltage Divider (513 KB)
- *Discontinued: X015 F-RACK (63 KB)
- *Discontinued: X025 F-RACK (60 KB)
- *Discontinued: FTF-16, FTF-08, FTF-04 Power Distributor Unit (with Fuse) (60 KB)
- FRK Panel (107 KB)
- *Discontinued: FTU-16, FTU-08, FTU-04 Power Supply Unit (52 KB)
技术信息
想要了解更多的信息，技术&解决方案？
联系我们