I want to switch between START and RUN from the main unit, but the S.R parameter doesn’t appear. [UT Series]

By factory default, STOP/RUN switching is assigned to contact input. Therefore the S.R parameter is not displayed. To display the parameter, disable the STOP/RUN switching function that is assigned to contact input.
Steps: Hold down the LEFT ARROW + PARAMETER (PARA) keys for 3 seconds, and enter setup parameters. Turn OFF the S/R parameter of the DI.SL item.

Related Products & Solutions

Advanced Application UT75A

The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.

Mid-level UT55A/UT52A

The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.

UT35A/UT32A

The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT35A/UT32A also support open networks such as Ethernet communication.

Top