By factory default, STOP/RUN switching is assigned to contact input. Therefore the S.R parameter is not displayed. To display the parameter, disable the STOP/RUN switching function that is assigned to contact input.
Steps: Hold down the LEFT ARROW + PARAMETER (PARA) keys for 3 seconds, and enter setup parameters. Turn OFF the S/R parameter of the DI.SL item.
Productos y Soluciones Relacionadas
-
Advanced Application UT75A
The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.
-
Mid-level UT55A/UT52A
The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.
-
UT35A/UT32A
The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT35A/UT32A also support open networks such as Ethernet communication.