CQ1 Software for upgrade

This software is designed for Confocal Quantitative Image Cytometer CQ1.

Note:
CQ1 Software can be installed in PC other than CQ1 control workstation and customer can view/analyze data measured by CQ1 (CQ1 Offline Software). Software performance is guaranteed only if CQ1 Software is installed in PC designated by Yokogawa. CQ1 Software can be used by customer own PC but performance is not guaranteed. Minimum system requirements are as following. Because of RAM capacity, analysis function may not work by 32 bit OS PC. In case of using analysis function in offline PC, it is recommended using 64 bit OS PC of following specification.

OS 64bit OS (Windows 7/10 Japanese/English) 32bit OS (Windows 7/10 Japanese/English)
Processor 3.60 GHz 3.40 GHz
RAM 16GByte (32GByte*1) 4GByte<
HDD (Built-in) System drive(C:) 2TB, Data drive(D:) 3TB System drive(C:) 2TB, Data drive(D:) 3TB
Display 1920 x 1200 and over*2

*1 For the fast time-lapse function (100 fps), 32 GByte of memory is required.
*2 Do not change the resolution of display when using the CQ1 Software.

Software

To use CQ1 software, the activation code is required.
After unzipping a zip file and installing the software, the MID will be displayed. Fill in the request sheet and send to us by e-mail.

Patch_CQ1_Software_Install.zip(196MB) Download
Install manual : IM80J01A03-01E_007.pdf(1MB) Download

相关产品&解决方案

  • 生命科学

    解锁生命本质

    横河电机灵敏、高精度的解决方案可实现快速准确的测量,支持突破性的研究,加快药物发现,并优化大规模生物生产。

  • 高内涵分析

    我们的高内涵分析系统利用强大的分析软件助力从基础科学到药物发现筛选的一系列研究应用。


置顶
WeChat QR Code
横河电机(中国)有限公司