Fundamental Materials for Industries
Caustic soda and hydrochloric acid, produced in electrolyzer plants, are fundamental materials used in varieties of industries; chemicals, pharmaceuticals, petrol-chemicals, pulp and papers, etc.
Profitability from Efficient Production
Profit is the result of the effective production with minimized running / maintenance cost.
Effective Production
Proper control of the process brings you stabilized quality of products with the vast operational profit. The process condition may vary often. When conditions are changed, the process controller and sensors have to follow well.
Energy Cost
Ion-Membrane electrolysis bath is the most effective among all types of electrolyzer in caustic soda production. But it still consumes huge energy. Energy consumption has to be reduced to minimize the environmental stress like CO2 emissions, for increasing your profitability.
Maintenance Cost of Membrane
A Membrane has life time. It should be maintained periodically. To prolong operating life, the electrolyzer plant should be monitored for optimized control.
Tough Environments
There is an intensive electromagnetic field around electrolysis bath. In addition chlorine and other by-products are corrosive. Sensing devices have to be tough against such environment with providing accurate measurement all the time.
Total Cost of Ownership (TCO)
Maintenance costs for these sensing devices should be considered as TCO, next to the initial cost of your investment. Those should be in good balance.
Why Buy Yokogawa?
Our devices can afford to perform accurate measurements under tough condition in electrolyzer plant application. You can minimize these maintenance costs, achieving the maximum profit from the control of the process with accurate measurement.
Salt Dissolver: Monitoring NaCl
FLXA202 Inductive Conductivity Transmitter & PEEK Sensor |
Overview and Problems
- NaCl concentration monitoring
- Raw salt easily clog the sensor
- Correlation characteristic changes depending on components of salt
Solution
- Wide hole sensor, no clogging of suspended solids, etc...
- Concentration (Weight %) free programmable
- Recommend bypass sampling
Benefits
- Reduce maintenance cost
- Supply stable brine to electrolysis bath
Electrolysis Bath: Monitoring pH
FLXA202 pH Transmitter & Sensor |
Overview and Problems
- pH monitoring to detect membrane leakage
- Sensor is easily deteriorated by high temperature and saturated Chlorine gas
Solution
- Special anti-corrosive glass membrane
- Special anti-corrosive structure of Ag ion trap
Benefits
- Rapid detection of pin hole of electrolysis membrane
- Maintenance cost reduction
Electrolyzer Plant: Flow Measurements
ADMAG AXF Series Magnetic Flowmeter |
Overview and Problems
- Flow measurement in electrolyzer plants
- The stray current from electrolysis bath harms the measurement by magnetic flowmeter
- High corrosive liquids such as caustic soda, sulfuric acid etc
Solution
- Dedicated DC Noise Cut Filter to minimize the stray current
- 0.35 % of reading, highly accurate and stable measurement by Dual Frequency Coil Excitation Method
Benefits
- High accurate and stable flow measurement is realized in electrolyzer plant
- Simple maintenance
Liners and Electrodes Yokogawa can prepare a wide variety of wetted Parts Materials Lining: • SUS316L • Platinum • Tantalum, and more |
Electrolysis Bath: Cell Voltage Monitoring
Overview and Problems
- Need multi-channel data logging with fast sampling measuring each cell voltage
SMARTDAC+ GM10 Data Acquisition Unit |
Benefits
- Rapid detection of pin hole of membrane
- Longer maintenance period of each cell
- Less maintenance of relays
- Can accept other process inputs: pressure, temperature, pH, ...
Solution
- 100 msec sampling fastest
- Isolated inputs, high withstand voltage: 600 VRMS/VDC (cont.)
- Up to 420 ch per system, Ethernet interface for expandability
- Individual cell-voltage measurement with ± 0.005 V accuracy
- Long-life semiconductor relay
HCl Plant: Monitoring HCl Concentration
FLXA202 Inductive Conductivity Transmitter & PEEK Sensor |
Overview and Problems
- HCl concentration monitoring
- High concentration HCl easily deteriorate the sensor
Solution
- Special electrode material resistant to concentrated HCl
- Concentration (Weight %) free programmable
Benefits
- High stability and accuracy for quality control
Final Production: Monitoring NaOH Concentration
DM8 Liquid Density Analyzers |
Overview and Problems
- NaOH concentration monitoring after electrolysis tank and concentrate drum • Need accurate measurement not affected by temperature variation
Solution
- Special tuning fork sensor
- Stable density measurement against temperature change
Benefits
- High stability and accuracy, for quality control of Caustic Soda
Chlorine Gas Drying Process: Monitoring H2SO4
FLXA202 Inductive Conductivity Transmitter & PFA Sensor |
Overview and Problems
- H2SO4 concentration monitoring
- High concentration H2SO4 easily deteriorate sensor
- Various measurement range
Solution
- Special material resistant to H2SO4
- Concentration (Weight %) free programmable
- Wide range ability in terms of conductivity
(100 µS/cm – 2 µS/cm)
Benefits
- High stability and accuracy to improve efficiency of drying process
- Only 1 spare sensor for 3 steps drying tower tank
Sensor for Conductivity Yokogawa can prepare a wide variety of sensors and fittings Sensor Materials: • Direct Insertion • Flow Holder, and more |
Technologies Commit Users' Benefits
Our Goal:
Our shared goal is customer satisfaction through operational excellence. Yokogawa has brought true innovations to industry. We are committed to ensuring accuracy, reliability, and safety of your production system throughout your business life cycle. Our comprehensive solutions and expertise help you achieve more results with less total costs of ownership. Below key technologies shall aim for your operational excellence.
Inductive Conductivity Sensors
ISC sensors use a high performance engineering plastic of PEEK (polyetheretherketone) that provides abrasion and corrosion resistance. The sensor has a large bore (17 mm) for optimal resistance to fouling processes and when properly installed, the flow will keep the sensor clean, to help avoid measuring errors. This large bore also allows quick response even on low flow measurement. Also available upon request is a PFA lined sensor that provides excellent heat and chemical resistance.
Dual Frequency Coil Excitation
Magnetic Flowmeters measure flow volume with Faraday's law. The frequency of excitation current given to coils affects in the measurement accuracy and response time. Dual Frequency Coil Excitation is Yokogawa's original technology to ensure ± 0.35 % accurate measurement as well as 0.1 second fast response simultaneously. Our signal processing technique enables us to bring the benefits of an AC & DC magnetic flowmeter into a single magnetic flowmeter.
ASIC for Accurate Measurement
The measurement engine forSMARTDAC+ series is requested to ensure accurate measurement even under the sampling speed as fast as 10 msec measurement interval. This performance is achieved with by Yokogawa developed special A/D converter.
High Withstand Voltage
For performing accurate monitoring for each of cell voltage as well as other parameters like temperature, isolation between channels is the key. A/D circuits of SMARTDAC+ input modules use special transformers. Semiconductor relay, designed by Yokogawa, is another key component for tough isolation. This enables high-speed scanning, while eliminating the periodic replacement of relay board. In addition, SMARTDAC+'s input modules employ integrating A/D converters with superior noise rejection performance.
For Your Operational Excellence
pH/Inductive Conductivity Transmitter: FLXA202
- Designed for two-wire system configuration
- Touch screen display
- Rugged cast aluminum case
- Event logbook
- Intrinsically safe version
Liquid Density Analyzers: DM8
- Measures liquid density with high sensitivity and excellent stability
- Measuring range of 0.5 to 2.0 g/cm³, unaffected by flow rate and viscosity
- Sanitary and flameproof detector also available
Data Acquisition: SMARTDAC+ Series
- Modular layout up to 420 channels
- High speed sampling: 100 msec fastest
- High withstand voltage (Reinforced insulation): 600 VRMS/VDC (cont.)
- SD memory card for data backup
- Expandability over Ethernet
Magnetic Flowmeter: ADMAG AXF Series
- Best-in-class performance with dual frequency excitation method
- Predictive electrodes adhesion diagnostics
- Variety of liners & electrode materials
- Fieldbus communication capability
Pressure Transmitter: DPharp EJA/EJX Series
- Best installed performance
- Compact and rugged design
- Multi-sensing digital sensor
- SIL2 as standard (EJX)
- Fieldbus communication capability
Temperature Transmitter: YTA Series
- High resolution, high stability and high versatility
- Dual compartment housing for harsh environments
- SIL2 safety as standard feature
- Fieldbus communication capability
ADMAG AXF and SMARTDAC+ are registered trademark of Yokogawa Electric Corporation.
DPharp is a trademark of Yokogawa Electric Corporation. Ethernet is a registered trademark of Xerox Corporation.
Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.
行业
相关产品&解决方案
-
2-Wire Transmitter/Analyzer FLXA202
The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.
-
ADMAG AXG系列
ADMAG TI系列ADMAG AXG可用于工业生产线,如石油天然气/化工/造纸/食品&饮料/采矿&金属等应用。凭借出色的可靠性、操作和维护的便捷性,以及几十年的现场验证经验,AXG可帮助用户增加效益,同时降低总成本。
-
FLXA202/21两线制变送器/分析仪
FLEXA™系列分析仪用于工业设施中的连续在线测量。它是灵活的两线制分析仪,可选择单传感器或双传感器测量。
-
FU20/FU24/PH20一体化pH/ORP (REDOX)传感器
PH20/FU20/FU24一体化pH/ORP传感器体现了横河电机如何将“简单即好”这句格言应用于传感器技术。
-
GM10模块
SMARTDAC+TM GM10数据记录器具有模块化的体系结构,可以获取必要的数据。不仅支持I/O,还支持920MHz无线、Modbus等多种通信协议,还可通过蓝牙进行监控和设置更改。
支持FDA 21 CFR Part11和AMS2750E/NADCAP。 -
ISC40电感式(环形、无电极)电导率传感器
ISC40型传感器与EXA ISC分析仪组合使用。在可靠性、准确性、可调性和性价比方面,该组合满足甚至优于对电导率测量的期望。
-
ROTAMASS Total Insight
这是横河电机目前为止技术非常先进的质量流量计。通过将Total Insight的理念和功能与特定流量传感器和变送器的优异设计相结合,ROTAMASS具有的灵活性可适应不断变化的要求,并确保在整个生命周期的过程测量中保持优良的性能。
-
TDLS8000在线气体分析仪
横河电机的新TDLS™8000功能强大,将诸多先进工业特性集成于一台耐用设备中。其平台设计适用于现场测量,无需进行样品抽取和样品处理。
-
YTA110/310/320 Temperature Transmitter
The YTA110/310/320 series is Yokogawa's base traditional temperature transmitter in the field-mount transmitter line.
-
YTA50
YTA50是一个2线制模拟温度变送器,对应测量的温度输出一个简单的4-20 mA输出。
-
YTA510无线温度变送器
高性能温度变送器YTA510接收热电偶、RTD、欧姆或DC mV输入信号。该变送器通过无线信号传输过程变量以及设定参数。该变送器采用内置电池,由于无需硬接线,因此可降低安装成本。通信规格以ISA100.11a协议为基础。
-
YTA610温度变送器
YTA610是横河电机必不可少的温度变送器。双腔室结构允许单输入或双输入,可以对本地参数设置功能进行基本诊断。
-
YTA70
与YTA50一样,YTA70是一个2线制模拟温度变送器,对应测量的温度输出一个简单的4-20mA的输出。但是,它增加了HART 5(代码-E),或者可选择HART 5或HART7(代码-J)数字通信。
-
YTA710温度变送器
YTA710是横河电机的高级温度变送器。双腔室结构允许单输入或双输入,可对本地参数设置进行高级诊断。
-
YTMX580多点输入温度变送器
YTMX580最多可接收8点测量输入值,如热电偶(8种类型:K、E、J等)或RTD信号(3种类型:Pt100等),并将相应的测量输入值转换为无线信号。它也可以接收DC电压、电阻和4~20 mA DC信号输入。
-
数据记录软件GA10
通过GA10软件可以建立一个无需编程的数据采集系统。GA10能够通过Modbus通信获取数据,与横河的记录器、数据记录仪、温度控制器和功率监视器实现兼容。
-
Diaphragm Seal System
Diaphragm Seal System can be used to measure liquid, gas, or steam flow as well as liquid level, density, and pressure.
-
pH和ORP传感器
pH电极和传感器是进行pH值测量的传感部分,有伸缩式、流通式、浸入式和直插式等多种安装选项。选择合适的pH电极/传感器对优化测量结果至关重要。
-
pH和ORP分析仪
pH和ORP流量计、分析仪和变送器用于pH和ORP的连续过程监测,以确保水/产品质量,如监测污水排放、批量中和、浆料存储、洗涤塔,冷却塔、化学品、水/废水处理和许多其他应用。
-
压力变送器
使用横河电机的压力变送器,可以对过程压力进行准确且稳定的测量,支持安全、可靠和可盈利的工厂运营。
-
数据采集器
数据采集器记载较长时间内监视、测试、分析资产健康状况和性能的传感器数据。横河电机的数据采集器以其卓越的可靠性、抗噪声性、测量精度和易用性得到业界的认可。
-
气体分析仪
实时气体分析可以提升效率、安全性、产量、产品质量和确保符合环保要求。
-
液体分析仪
液体分析仪用于监测水质等工艺化学特性,提供过程优化和控制。
-
温度变送器
横河电机提供全面的温度变送器系列,其中包括接线盒内嵌式、盘装式或现场安装式。
-
现场无线
无线解决方案的灵活性可减少对基础设施的投入,同时可以对工厂运营有更深入的了解。
-
电导率传感器
电导率传感器和电极用于测量过程电导率、电阻率、WIFI、软化水、RO水、百分比浓度、锅炉水排污和TDS。有伸缩式、流通式、浸入式和直插式等多种安装选项。选择合适的电极/传感器对优化测量结果至关重要。
-
电导率分析仪
电导率测量仪、分析仪和变送器用于对电导率、电阻率、WIFI、软化水、RO水、百分比浓度、锅炉水排污和TDS进行连续测量和监测。
-
电磁流量计
横河电机在电磁流量计方面的经验已经有数十年了。我们的电磁流量计为大多数地区的工业用途提供了灵活的配置。
-
科里奥利质量流量计
ROTAMASS科里奥利质量流量计分为一体型和分体型。两种型号都具有较高精度的数字信号处理元件,可以实现准确稳定的流量测量。