How can I monitor the DX1000/DX2000 screen on a PC via the Internet?

You can monitor the DX1000/DX1000N/DX2000 screen from Internet Explorer. Use the following steps.

  1. Set the IP address on the recorder and PC.
  2. In the recorder settings, under Basic Setting mode > Communication (Internet) > Server function, set Web to "Yes" (the initial setting is "Yes").
  3. In the recorder settings, under Basic Setting mode > Communication (Internet) > Web page, set Operator or Monitor to "ON" (initial value is OFF).
  4. (For Monitor page) In a PC web browser, in the address bar, enter http://[IP address of the recorder]/ and press the Enter key.
    (For Operator page) In a PC web browser, in the address bar, enter http://[IP address of the recorder]/operator.htm and press the Enter key.

 

相关产品&解决方案


置顶
WeChat QR Code
横河电机(中国)有限公司