pH in Glass Lined Reactor

Introduction

In Bioscience company’s pH is used at various places including glass lined reactor for product efficiency.One of such measurement of pH inreactor as explained below.

Application Information

Typical example of process is:

Reactor used is GLASS LINED REACTOR and length is 1950 mm; and flange size 100 mm split flange with 8 holes PCB (fixing hole center to center) 190 mm; flange outer to outer 225 mm; flange extension pipe (Nozzle) ID 95 mm.

Nature of fluid: Aqueous media
Operating temp & pressure: 30°C temp & atmosphere pressure
Area classification - Example Zone 1 / Zone 2
Nozzle ID: 95 mm.

Product Recommendation

Measurement System

Process Liquid Analyzer: 

• FLXA202/FLXA21 with intrinsic safe version; 2-wire pH transmitter

Features

• Dual sensor measurement on 2-wire type analyser;
  Tangible benefit:More reliable and accurate analysis of pH which helps to improve end product quality.

 

Sensor Selection:

Hamilton® POLILYTE HTVP

Features:

• Best measurement accuracy both in high-alkali processes and in samples with very low conductivity.
• Sterilizable and autoclavable
• SINGLE PORE‘s for clog-free contact of electrolyte with measurement medium
• HAMILTON “H” pH glass
• Serialized with batch number

Sensor Accessories

• 5mtrs Cable, Model No.: WU10-V-S-05 
• Immersion sensor fitting (Customised): 1900 mm Length, 4" Flange Connection with 8 holes PCB (fixing hole centre to centre) 190 mm;  flange outer to outer 225 mm; pipe (Nozzle) ID95 mm. MOC : PTFE.