Mitsubishi Chemical Builds Safer and More Reliable Emergency Shutdown System Using DCS Integration

下载 (226 KB)

Project Background

To process a greater variety of materials and improve global competitiveness, Mitsubishi Chemical Corporation's Kashima Plant (Tobu Zone) and Mitsubishi Chemical Engineering Corporation contracted with Chiyoda Corporation in May 2004 to construct an additional fractioner for an ethylene plant. Yokogawa's CENTUM CS 3000 R3 was selected as the new control system. After carrying out an extensive study, the customers decided to employ ProSafe-RS as the emergency shutdown system instead of conventional relay-based systems in order to:

  • Meet the IEC 61508/JIS C 0508 functional safety standards
  • Proactively introduce leading edge technologies
  • Accommodate the plant licensors' safety, reliability, and maintainability requirements
  • Improve the monitoring and operation functions of the emergency shutdown system

ProSafe-RS

The Challenges and the Solutions

By introducing the ProSafe-RS, the Kashima Plant improved safety, reliability, monitoring, and operation as follows:

  • Dramatic improvement in plant safety through compliance with IEC 61508/JIS C 0508 SIL3
    ProSafe-RS is certified to comply with the IEC 61508/JIS C 0508 (up to SIL3) international functional safety standards. This affirms that a plant will be securely shut down whenever a critical condition occurs, greatly improving plant safety.
  • Achievement of high-level safety while minimizing erroneous trips
    ProSafe-RS maintains plant safety at a high level while keeping to a minimum unnecessary trips triggered by a system's own abnormalities. Mitsubishi Chemical's system incorporates redundant CPU and I/O modules that can avoid almost all erroneous trips, contributing to increased reliability and plant availability.
  • Improved centralized management of plant information through CENTUM CS 3000 R3 integration
    Plant information can be centrally managed thanks to ProSafe-RS's capability to achieve true integration with the CENTUM CS 3000 R3, enabling ProSafe-RS inputs and outputs as well as system operation statuses to be monitored on CENTUM's human interface stations. Emergency operations can also be initiated on the CENTUM stations for better emergency preparedness.

Customer Satisfaction

Takayuki Aoyama, Team Leader of the Instrumentation Group at the Maintenance Technology Center, commented:

"Usually introducing a new thing takes time: you must collect various kinds of information about it, then study actual records, reliability, and technological factors. This is even more so when you consider introducing a product that is used to guarantee safety.

This is where ProSafe-RS comes in. Safety instrumented systems can be evaluated according to international standards and certified by a registered certification body. This spares users the trouble of conducting a feasibility study. The safety standards cover a wide range of items and are thorough about maintaining safety during the detailed design phases. As the system design utilized probability theory, engineers are better able to give a logical explanation of it to third parties.

Introduction of the new safety system was a big decision for us as the existing interlock used hardware relays. As we understood the standards as well as the configured actual hardware and software, however, we were convinced that the new system took safety into much greater consideration than conventional systems and that we had made the right decision.

Interlock-related equipment is growing more complex as it is required to ensure safety against all types of failures, and the same was true when panel instruments were replaced by distributed control systems (DCS). For this reason we employed the ProSafe-RS safety instrumented system. We also believe that the time is approaching when all hardware relays will be replaced by CPU-based systems."

•Safety instrumented system   •Main products Kashima Plant, Mitsubishi Chemical:1.69 million m2

行业

相关产品&解决方案

SIS (SIL3认证) ProSafe-RS

ProSafe-RS是获得德国认证机构(TÜV)认证的安全仪表系统,符合IEC 61508中指定的安全完整性等级(SIL)3。它已经在2400多个项目中安装使用,涵盖从大型集成过程自动化项目到独立解决方案等多种项目类型。

集散控制系统(DCS)

横河电机的集散控制系统(DCS)使工业过程实现了自动化控制,并增强了业务性能。超过10000家工厂采用横河DCS来实现他们的生产目标。

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

置顶
WeChat QR Code
横河电机(中国)有限公司
WeChat Recruiting QR Code
横河电机中国招聘