- Duocast (ISA100.11a 標準):
|頻率||b/g: 2400-2483.5MHz, |
|接頭||N型||RJ-45||SC 接頭 |
[ 單極 × 2 ]3
|管理/配定等||IEEE1588PTP v24, |
|IEEE1588PTP v24, |
|IEEE1588PTP v24, |
- 由於受到導管孔口徑的限制，所以不能使用2極SC接頭。SC接頭應使用Short Boot型。
|功能規格||Te溫度範圍ge||運行時： -40 to +65°C (海拔高度：最高3000米) |
存儲時： -40 to +85°C
|H濕度範圍ge||運行時：:5 to 95 %RH (無結露) |
存儲時： 5 to 95 %RH (無結露)
|P電源ly||電壓範圍： 10.0～26.4 V DC |
額定電壓： 24 V DC
|R&TTE 一致性標準s|| |
|Saf安全要求nts||CSA C22.2 No. 61010-1|
|Exp防爆類型ed Types||FM, CSA 非易燃認證oval |
ATEX, IECEx 隔爆認證
One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.
Wireless Multi-Input Temperature Transmitter YTMX580 can accept inputs from up to 8 points, and contribute to your CAPEX cost reduction.
Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.
Eliminating the wire using wireless transmitter is the perfect solution for rotating equipment. It establishes data collection between the transmitter and the gateway by reliable communication even though the dryer was rotating.
Blending plays a key role in industries such as food, healthcare and chemicals etc. Temperature and vacuum measurements are very important in minimizing the moisture content to ensure the quality of the final product. Strictly maintaining them throughout the process ensures the final product yield.
Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.
Pressure measurement of tubeless tyres to monitor the air loss is one of the key performance tests in the tyre manufacturing units. Relocation of tyres from one testing rack to the other for various tests and frequent movement of the testing setup for conditional tests to various locations calls for cable free implementation for ease of handling.
Wireless technology has a long history, and it began around the time that James C. Maxwell theoretically predicted and then proved the existence of electromagnetic waves in the 1860s, and when Heinrich R. Hertz experimentally confirmed the actual existence of the electromagnetic wave in 1888.
In plant sites, there are various places such as those affording an unobstructed view like tank yards, and others surrounded by metal pipes and equipment obstructing the view (hereafter referred to "pipe jungles"), often seen in oil refinery and chemical on-site plants. The frequency band of radio waves used for field wireless communication is 2.4 GHz, which has high straightness and its ability to go around things can hardly be expected.
The FieldMate versatile device management wizard is PC software mainly used for configuring and adjusting field devices. Under the concept of "one tool for all," Yokogawa has been enhancing this software to support a wide range of field devices and field communication protocols.
In recent years, expectations for control systems using wireless communications have been increasing in the process control market. This is because these systems do not require power and communication wiring for field instruments, enabling reduced initial and maintenance costs, and easy installation.