Беспроводной преобразователь температуры YTA510

Прибор YTA510 является высокоточным преобразователем температуры, принимающим входные сигналы от термопар, термометров сопротивления, омических или милливольтовых устройств пост. тока. С помощью беспроводного соединения он передает не только переменные технологического процесса, но и параметры настройки. Датчики работают от внутренних батарей, и стоимость установки может быть снижена благодаря отсутствию необходимости проводного соединения. Связь осуществляется на основе протокола ISA100.11a. Модель прибора со съемной антенной позволяет использовать антенну с высоким коэффициентом усиления *1 с удлинительным кабелем. Конструкция со сверхнизким потреблением тока обеспечивает многолетнюю работу беспроводной связи и длительный срок службы батареи.

Обзор OpreX

OpreX — это комплексный бренд, объединяющий решения компании Yokogawa в сфере промышленной автоматизации и управления, и символизирующий передовые технологии и решения. Бренд представлен категориями, каждая из которых состоит из семейств. Данное изделие относится к семейству полевых КИП OpreX, представленному в категории измерительного оборудования OpreX.

Подробно

Технические характеристики

Технические характеристики беспроводной связи

Коммуникационный протокол

ISA100.11a / IEEE802.15.4

Скорость передачи данных

250 кбит/с

Частота

2.400 - 2.4835 ГГц, нелицензируемый диапазон частот ISM

Радиобезопасность

Кодирование AES 128 бит

Мощность ВЧ-передатчика

Не более 11,6 дБм (фикс.)

Антенна

+2 дБи, всенаправленная антенна
Модель прибора со съемной антенной (код корпуса усилителя 8 или 9) позволяет использовать антенну с высоким коэффициентом усиления1 с выносным кабелем.

Стандартные технические характеристики

Входы датчиков

Один вход: код корпуса усилителя 7
Двойной вход: код корпуса усилителя 8 или 9
RTD: Pt100, Pt200, Pt500 (МЭК) и омические устройства
Термопары: B, E, J, K, N, R, S, T (МЭК) и милливольтовые устройства (−10..110 мВ)
Доступен выбор типа входа: термопары, 2-, 3- и 4-х проводные RTD, омические или милливольтовые устройства постоянного тока.
Вход датчика 1 позволяет использовать 4-х проводные устройства.

Погрешность аналого-цифрового преобразования

Pt100: ±0.3°C
Тип k: ±1 °C

Погрешность компенсации холодного спая (только для термопар)

±0.5°C

Интервал обновления

Настраивается от 1 с до 60 мин

Срок службы батареи

Стандартный срок службы батареи — 10 лет при измерении с интервалом обновления 10 с или 8 лет с интервалом обновления 5 с в следующих условиях.2
Модель устройства со съемной антенной (код корпуса усилителя 8 или 9)
Режим низкой мощности
Температура окружающей среды: 23±2 °C
Режим работы устройства: ввод/вывод
ЖК-дисплей: выключен

Физические характеристики

Антенна

+2 дБи, всенаправленная, монопольного типа

Масса

2.8 кг (без батарейного блока и монтажного кронштейна)

Корпус

IP66/IP67, NEMA4X

Источник питания

Литий-тионилхлоридные батареи (размер D×2)

Замена батареи

Включая зону класса 0

Сертификация

Взрывозащищенность

ATEX, FM, CSA, IECEx: аттестация по искробезопасности

Стандарты соответствия ЭМС

EN61326-1 класс A, таблица 2 (для использования в промышленных зонах),

EN61326-2-3

Стандарты совместимости R&TTE

ETSI EN 300 328, ETSI EN 301 489-1,
ETSI EN 301 489-17, EN61010-1, EN61010-2-030, EN62311

Соответствие нормативам для беспроводных модулей

• Аттестация FCC
• Аттестация IC

Стандарты требований безопасности

EN61010-1, EN61010-2-030

Прочее

Температура окружающей среды

от −40 до 85 °C

  1. В соответствии с положениями законодательства о радиосвязи в стране применения.
  2. Срок службы батареи зависит от условий применения, таких как вибрация.

Файлы

Обзор:
  • As the main automation contractor (MAC) for this plant construction project, Yokogawa Brazil engineered, installed, and commissioned an integrated control and instrumentation solution
  • Yokogawa Brazil completed the commissioning of these systems ahead of schedule and the production of green polymer was started just one week later
Application Note
Обзор:

Eliminating the wire using wireless transmitter is the perfect solution for rotating equipment. It establishes data collection between the transmitter and the gateway by reliable communication even though the dryer was rotating.

Отрасли:
Обзор:

ISA100 wireless temperature and pressure transmitters with orifice plates allow:

  • No cabling installations or maintenance.
  • Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
Обзор:

Caustic soda and hydrochloric acid, produced in electrolyzer plants, are fundamental materials used in varieties of industries; chemicals, pharmaceuticals, petrol-chemicals, pulp and papers, etc. Profit is the result of the effective production with minimized running / maintenance cost. Proper control of the process brings you stabilized quality of products with the vast operational profit.

Отрасли:
Обзор:
  • Temperature is monitored to maintain consistency of the viscous fiber entering the drum.
  • Existing system requires manual temperature readings.
  • Wired temperature measurement is not available because the tank is rotating.
Обзор:

ISA100 Wireless Monitoring  

  • Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1

Gateway is installed at control room and 3m height extended antenna is set.

Обзор:

Challenges

  • The distance is not so long, but there are many pipes and tanks ("Pipe Jungle") in the field.
  • Had to avoid the obstacles and take care multi path condition.  

Solution

Repeater is installed on high place between control room and monitor position. The extend cable is used for antenna of Gateway.

  • Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x2
Обзор:
  • Daily manual reading of pressure and temperature gauges with report by phone.
  • The customer wants to change measurement from off-line to on-line.
  • Cabling for wired transmitters in huge plants (up to 300 meters long) is expensive.
Обзор:

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

Обзор:
  • Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
  • Repeater is installed on high position.
Обзор:

ISA100 wireless temperature and pressure transmitters.

Обзор:

ISA100 Wireless Temperature and Pressure Transmitters

  • Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1

High quality wireless communication confirmed

  • Packet Error Rate (PER) is 0 to 2.5%/ 5 days
Обзор:
  • Wireless temperature measurement
    Gateway x1, transmitter (YTA) x1, repeater x2 (The 2 repeaters are for redundancy)
  • Extended antenna to circumvent obstacles and improve the radio path for stable measurement (communication was unstable when the height of the antenna was low).
Обзор:
  • Manual temperature reading requires walking about 130 m and climbing up and down elevated sections of the dryer stages.
  • Multiple temperature measurement points along the various stages of the dryer require many cables to the control room.
  • Very high humidity.
Обзор:
  • Wireless temperature measurement 
    gateway x1, transmitter (YTA) x1
    repeater x1: between gateway and YTA.
  • High quality wireless communication was confirmed.
    With repeater at center: The packet error rate was 0%.
Отрасли:
Обзор:

Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.

Application Note
Обзор:

Blending plays a key role in industries such as food, healthcare and chemicals etc. Temperature and vacuum measurements are very important in minimizing the moisture content to ensure the quality of the final product. Strictly maintaining them throughout the process ensures the final product yield.

Отрасли:
Обзор:

Geothermal power plants create electricity from geothermal energy. These power plants are similar to other steam turbine station; however their heat source is that of the earth's core. The created steam is used to turn the turbine for the production of electricity. Technologies include Dry steam, Flash steam and Binary cycle power stations with Binary cycle being the most common geothermal plant in current production. In the process of geothermal power generation the facility needs to monitor various processes, as in this case steam line pressure sits in remote from control room's location.

Application Note
Обзор:

A horizontal rotary miller used to grind the limestone rocks with metallic balls as grinding stones. This is used as the raw ingredient to produce cement powder. The temperature needs to be monitored in order to control the process and the quality of the final product. The user was using an induction temperature measurement based on a rail system that was very fragile and therefore unreliable.

Обзор:

Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.

Отрасли:
Обзор:

One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.

Отрасли:
Обзор:
  • Wireless pressure and temperature monitoring.
  • Repeater was set under the gateway.
  • The maximum distance between the repeater and transmitters is approximately 500m.
Отрасли:
Обзор:

In recent years, more field wireless devices have been used in hazardous areas. Meanwhile, in plants that are usually recognized as hazardous areas, there are numerous metallic tanks and pipes that easily shield or reflect radio waves, as discussed later, thus resulting in a poor environment for wireless communication.

Yokogawa Technical Report
Обзор:

The innovation of wireless technology increases the use of wireless communication in the industry. The introduction of wireless communication to plants, however, requires strict features such as robustness, real-time responsiveness, and low power consumption. This has restricted the use of wireless communication to limited applications such as data logging and device status monitoring that does not require strict real-time responsiveness and data arrival reliability in communication.

Материалы

Хотите узнать больше о наших технологиях и решениях?

Контакты

Наверх