Pressure - On a Yokogawa pressure transmitter, can the integral indicator be rotated?

Changing the Direction of the Integral Indicator

An integral indicator can be installed in the following three directions. Follow the instructions in section 8.4 for removing and attaching the integral indicator.

Procedure

1. Remove the cover. Place the cover on a clean surface to ensure that dust and grim do not get on the cover threads.
2. While supporting the integral indicator with one hand, loosen its two mounting screws.
3. Dismount the LCD board assembly from the CPU assembly. When doing this, carefully pull the LCD board assembly straight forward so as not to damage the connector pins between it and the CPU assembly.
4. Rotate the indicator to the desired position
5. Align both the LCD board assembly and CPU assembly connectors and engage them.
6. Insert and tighten the two mounting screws.
7. Replace the cover being careful not to cross-thread it.

For Technical Assistance, please contact the Technical Support Group by email at support@us.yokogawa.com or call 1-800-524-7378.