Cannot download to YFGW410. Receive error "command rejected, retry the command after other process has completed".

This error message is generated when you try to download a configuration to the YFGW410 when the  OTA (over-the-air) provisioning mode is enabled.   To allow a download to proceed, you must disable the OTA provisioning mode.

Here is the error that you will see in the configurator when download is attempted with OTA provisioning active.

 

Here is the screen in the monitor webserver (found under tools menu), where you enable/disable the OTA provisioning.   Click into the box labeled "Enable Provisioning Network" to change status.