Application for a Time Proportioning Output Converter

The UTAdvanced Digital Indicating Controller comes standard with ladder sequence function. The ladder sequence function can handle measured and computed values from the controller. Using this function, the UTAdvanced converts outputs from other controllers such as YS1500 to time proportioning outputs.

ns-appli78-02.jpg

This is easy to achieve by setting up the ladder program below on the UTAdvanced (it is not necessary to enter settings for PID and other parameters, and you can simply set output type parameters to voltage pulse output.)

ns-appli78-01.jpg

Note that when conversion to current output is required, you can set the output type parameters to current output.

And for the display section, since you can turn OFF the SP value and status display sections (e.g.: AUTO/MAN and R/L displays) on the UTAdvanced, you can create a simpler display that only shows the indicated value.

Related Products & Solutions

  • Mid-level UT55A/UT52A

    UT55A/UT52A 온도 컨트롤러는 네비게이션 키와 함께 읽기 쉬운 14 세그먼트 대형 컬러 LCD 디스플레이를 채택하여 모니터링 및 작동 기능을 크게 향상시켰습니다. 또한, 래더 시퀀스 기능도 표준으로 탑재하고 있습니다. 컨트롤러의 깊이가 짧아 공간을 절약할 수 있으며 이더넷 통신과 같은 개방형 네트워크도 지원합니다.

    See More
  • UT35A/UT32A

    UT35A/UT32A 온도 컨트롤러는 네비게이션 키와 함께 읽기 쉬운 14 세그먼트 대형 컬러 LCD 디스플레이를 채택하여 모니터링 및 작동 기능을 크게 향상시켰습니다. 또한, 래더 시퀀스 기능도 표준으로 탑재하고 있습니다. 컨트롤러의 깊이가 짧아 공간을 절약할 수 있으며 이더넷 통신과 같은 개방형 네트워크도 지원합니다.

    See More

Top