YS1500 조절계는 PID 제어에 필요한 기본적인 제어 기능을 미리 내장하고 있어 사용자의 목적에 따라 기능을 선택 설정할 수 있는 단일 루프 컨트롤러입니다. 사용 가능한 기능에는 제곱근 추출 및 선형 세그먼트 변환, 피드 포워드 연산과 같은 입력 신호 처리에 필요한 기능이 포함됩니다. 단일 루프, 캐스케이드 및 선택기 모드도 사용할 수 있습니다. 표준 모델은 이전 시리즈보다 작고 가벼우 며 설치 공간이 적게 필요하며 CE 마크 및 FM 등 각종 규격에도 대응하고 있습니다. 이전 컨트롤러를 쉽게 교체 할 수 있도록 동일한 패널컷과 깊이의 호환성을 갖춘 호환형도 있습니다.
Details
특징
- TFT-LCD에 의한 시인성 향상 : 햇빛이 직접 닿는 같은 패널면에서도 좋은 시인성을 확보 할 수 있습니다. 또한 미터 표시, 트렌드 표시, 바 표시, 알람 표시 및 이벤트 표시 등의 작업 화면을 선택하여 볼 수 있습니다. 모든 파라미터는 전면 패널 디스플레이를 통해 설정할 수 있습니다.
- 기능 선택 모드 (프로그래밍 필요 없음) : 다기능 컨트롤러 모드는 프로그래밍 없이 자주 사용하는 기능 (단일 루프, 계단식 또는 선택기 제어)을 제어를 선택할 수 있습니다. 디지털 및 아날로그 입력 / 출력 (DI, DO, AI 및 AO)에 대한 기능 할당은 매개 변수 설정에 의해 결정됩니다.
- Fail safe: 듀얼 CPU (제어용과 디스플레이용) 덕분에 어느 한 CPU의 고장에도 디스플레이 및 수동 작동이 가능합니다. 디지털 회로와 독립적으로 통합된 하드 수동 회로는 두 CPU를 포함하는 디지털 회로의 고장시 컨트롤러 출력을 수동으로 조정할 수 있습니다. (하드 수동 회로는 /NHM 옵션이 지정된 경우 사용할 수 없습니다.)
- 메모리 백업을위한 비 휘발성 메모리 : 메모리 백업 시 배터리 또는 커패시터가 사용되지 않아 유지 관리에 용이합니다.
- 깊이 250 mm (기본형만 해당)
- 전면 방진 방적 IP54 구조 (기본형 만)
- CE 마크 (기본형 및 YS100 대응형 전용)
- FM 비발화 폭발 방지 (기본형에만 해당)
- 통신 (옵션) : 이더넷 (Modbus / TCP, 기본형만 해당), RS485 (PC 링크, Modbus, YS 프로토콜, YS80 내부 장치 호환형에서는 사용할 수 없음), DCS-LCS 통신
- YS100 시리즈와 호환 : 설정 및 조작 방법에도 호환성이 있습니다. 기본형의 경우 신호 단자 간격은 다르지만 신호는 상대적으로 동일한 위치에 배치하고 있습니다.
Easy to use
Display
Programming
YSS1000 Configuration and Programming Software
Programming demonstration video
Three connection modes
Connection modes: USB, Ethernet or RS485
When connecting via RS485 or Ethernet, a communication option is required on the main unit.
Full set of computation functions
-
Supports parameter setting for all YS1000 models
Password protection function
Passwords can be assigned to user programs to prevent unauthorized access to proprietary programs.
A password on the main unit prevents unexpected changes in the engineering parameters.
Compact case
Designed with a Lightweight, Compact Case
Provides for greater freedom of instrumentation design
Compact, lightweight design allows the use of smaller and less expensive panel. Moreover, it allows attachment to doors which was previously difficult.
Simple exterior
High reliability
Control Output Backup Function
The control output backup function comes standard with YS1000 series controllers (YS1700 and YS1500) and the Manual Station for MV Setting (YS1360).
Dual CPU
With dual-CPU construction (main CPU and display CPU), manual control capability and display continues even if an abnormality occurs on one of the CPUs. If controller self-diagnostics detects a control circuit failure, the controller can suspend analog/digital output, switch to manual mode and allow manual control by operator.
| Functions/ Failure area |
Main CPU fail | Display CPU fail | All CPU and Control Circuit |
|---|---|---|---|
| Control with "Hard manual" | X | X | X |
| Manual operation with front keys | X | X | N/A |
| Display for PV and SV | X | X | N/A |
| Control algorithm | stop | stop | stop |
Manual operation-"hard manual"
Independent manual override is built into the control circuits, ensuring that control output can continue even when a control circuit including the CPU experiences a problem.
*Comes standard with YS1700-1xx, YS1500-1xx, YS1360-1xx
Battery free memory backup
Nonvolatile memory is used for memory backup. Service life is improved because no batteries, backup capacitors, or other components are used.
AC/DC power supply resists powerline fluctuations
The AC/DC (100 V /24 V ) power supply powers the instrument to provide consistent performance.Also accepts DC power regardless of polarity (specify 220 V power supply when ordering).
Improved basic control performance
The YS1000 series achieves higher performance than previous models (YS100 series).
- I/O accuracy
Voltage input accuracy: ±0.2% ⇒ ±0.1%
Voltage output accuracy: ±0.3% ⇒ ±0.1%
Current output accuracy: ±1.0% ⇒ ±0.2% - Internal data resolution of the I/O signal: 1/1000 ⇒ 1/10000
- Internal computation resolution of PID and other computations: 1/4096 ⇒ 1/65536
Controller online replacement function (portable manual station)
Use the YS110 portable manual station when exchanging or performing maintenance on a controller. You can switch to the spare controller without interrupting the control output.
Front panel conforms to the IP54 waterproof standard
Tougher environmental resistance.
Other specification
- CE Mark (for basic type and compatible type for YS100)
- FM nonincendive approved (FM Class I, DIV 2)
- CSA safety and nonincendive approved (Class I, DIV 2)
Powerful and Flexible
Ethernet support
The instrument can be easily connected to DAQWORX, SMARTDAC+, general-purpose SCADA, and OPC servers via Ethernet (Modbus/TCP).
Ethernet : Available to the YS1000 basic type. Modbus/TCP server function (one connection).
Communication with PLC
Connections are enabled using the FA-M3' s UT link module and the RS485 communication function. No programming is necessary to exchange data between the instrument and the FA-M3.
The YS1000 can also be connected to PLCs of various manufacturers via the Modbus communication protocol.
Communication with CENTUM
As with previous models, communication with Yokogawa's DCS (CENTUM) is supported. This is ideal for DCS backup in chemical plants and other applications requiring extreamly high reliability.
Applicable Models: YS1700,YS1500,YS1350,and YS1360
Control Function
Self-tuning (STC)
Simplifies tuning when starting up or changing the process unit under control.
Setpoint filter (SVF)
Can optimize tracking with changes in set-points. Also can maintain optimum responsiveness to disturbances.
Flexible DI/DO
The YS1700/YS1500’s six DI/DO terminals can be used for both input and output.
Compatibility
자료실
For safe and efficient operation, the quality of feedwater, steam, and condensate in boiler plants must be controlled and maintained in the most favorable conditions.
To technology in iron & steel industry is continuously improved to obtain the best possible performance. The improved plant performance gives rise to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.
Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.
Automated control of industrial boilers is an excellent application for YS1700 microprocessor-based loop controllers. These instruments can be programmed to perform the operations of plant master, boiler master, fuel and air control with oxygen trim and drum level/feedwater control.
Downloads
Brochures
Instruction Manuals
- Notice of a change of YS1000 series terminal screws Cautions for tightening terminal screws when wiring YS1000 series (135 KB)
- Precautions on the Use of the YS1000 Series (Functional Enhancement) (253 KB)
- YS1000 Series Communication Interface User's Manual (Functional Enhancement) (3.6 MB)
- YS1000 Series Replacement Manual (2.5 MB)
- YS1500 Indicating Controller, YS1700 Programmable Indicating Controller Operation Guide (Functional Enhancement) (4.7 MB)
- YS1500 Indicating Controller, YS1700 Programmable Indicating Controller User's Manual (4.9 MB)
- YSS1000 Setting Software for YS1000 Series, YS1700 Programmable Function User's Manual (12.4 MB)
- YSS1000 Setting Software Installation Manual (Functional Enhancement) (1004 KB)
General Specifications
Technical Information
- Recorders, Data Loggers, and Control Products Security Standard (488 KB)
- Introduction of YS1000 Series (6.5 MB)
- YS1000 Replacement Guide Overview, Model Conversion (Functional Enhancement) (3.8 MB)
- YS1000 Replacement Guide SLPC → YS1700 User Program Conversion (Functional Enhancement) (10.8 MB)
- YS1000 Replacement Guide YS170 → YS1700 User Program Conversion (Functional Enhancement) (9.2 MB)
- YS1000 Series Drawing Package (Guide for selecting new models) (3.5 MB)
- YS1000 Series Replacement Guide Installation and Wiring (Functional Enhancement) (1.6 MB)
Drawings
- YS010 Expandable I/O Terminal (472 KB)
- YS011 Expandable I/O Cable (432 KB)
- YS1000 Series YS1xx0-03x Compatible Type for YS80 Internal Unit/Compatible Type for EBS, I, EK, and HOMAC (378 KB)
- YS1000 Series YS1xx0-04x Compatible Type for YS80 (compatible size for YS80 with YS100 terminal) (295 KB)
- YS1500 Indicating Controller(YS1500-00x), YS1700 Programmable Indicating Controller (YS1700-00x, YS1700-01x) (361 KB)
- YS1000 Series YS1xx0-02x Compatible Type for YS100 (with YS100 case) (327 KB)
- YS1000 Series YS1xx0-05x Compatible Type for Pneumatic 100 Line (with YS100 Terminal) (313 KB)
- YS1000 Series Single loop controller (YS1700-00, YS1500-00, YS1300-00) DXF data (248 KB)
- YS020 120ohm Terminating Resistor for RS422/RS485 Communication (71 KB)
- YS021 250ohm Shunt Resistor for a Built-in 24V Transmitter Power Supply (68 KB)
- YS1000 Series Single loop controller (YS1700-00, YS1500-00, YS1300-00) DWG data (222 KB)
- YS1000 Series Single loop controller (YS1700-01) DXF data (305 KB)
- YS1000 Series Single loop controller (YS1700-01) DWG data (235 KB)
- YS1000 Series Single loop controller (YS1700-02, YS1500-02, YS1300-02) DXF data (277 KB)
- YS1000 Series Single loop controller (YS1700-02, YS1500-02, YS1300-02) DWG data (203 KB)
동영상
The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.
기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?
견적 및 기술문의