CA Series 비접촉식 전자유량계

The CA Series is the successor to the ADMAG CA series.
The sensor structure inherits the structure of ADMAG CA.
The transmitter has evolved with the design of the Total Insight concept.

Image Zoom

• Electrodes not in contact with fluid
• High-purity alumina ceramics measuring tube

Image Zoom

The CA Series electrode is structured so that it does not come into contact with the fluid. The highly concentrated slurry fluid does not come into contact with the electrodes. Therefore, electrical noise generated by contact between the slurry and the electrode is not physically generated.

Image Zoom

The surface of the ceramic measuring tube is smoother (Ra 1.6) and has a structure that prevents insulation from sticking to it. Even if an insulator adheres, the CA Series has no effect on measurement because of the measurement principle of the capacitive equation.

Image Zoom

Capacitive electrodes and high impedance circuits make it possible to measure ultra-low conductivity fluids.
Since the electrode is installed as a face electrode on the outside of the ceramic pipe, which is a measuring tube, the signal electromotive force is detected through the capacitance of the tube wall. In addition, the adoption of high-frequency excitation and the realization of a high-impedance circuit at the signal input make it possible to reliably detect fluid electromotive force with minimal effect of fluid noise.

Image Zoom

Image Zoom

• A common product concept for flowmeters that assist customers throughout the product lifecycle.
• Helps customers reduce operating costs throughout their entire product lifecycle.
• Solve your problems with outstanding technology and field domain knowledge.

HART Communication

Improved connectivity with host devices

By supporting the world standard HART communication, it is easy to achieve uniform communication protocols for the entire plant. Uniform protocols also improve maintainability.

Image Zoom

Simple and easy setup by following the Wizard function on the display

Frequently used parameters can be set via a wizard function. Even first-time users can follow the flow and set it up with intuitive peace of mind. Setting time is also reduced because the set parameters are downloaded together to the device.

Image Zoom

The language of the display unit can be selected from 9 languages. By displaying the optimal language for the user, it is possible to check the display information accurately in a short time.

* Available Languages: Japanese / English / Chinese / French / German / Italian / Spanish / Portuguese / Russian

Image Zoom

Choice of the Clamp type or M4 Screw type

Both clamp and screw types boast high reliability. The clamp type takes about half the wiring time as the screw drive.

Image Zoom

A lot of information can be checked at a glance, visibility has also improved

The display is a dot matrix 4-line display. Even if the device is installed in a dark place, the information can be confirmed by the backlight, and the visibility is excellent.

* 64 x 128 dot LCD

Image Zoom

Device itself acquires process data

Data is acquired on the built-in microSD card, so no other devices need to be prepared. You can understand the situation before and after a malfunction occurs, which enables quick troubleshooting. Up to three data points can be logged simultaneously.

Image Zoom

Data copy time from microSD card to device is only 1 minute

Parameters set for the device can be saved on a microSD card. Parameters saved in microSD can be copied to another device and set.
It takes about 30 minutes to set the parameters manually. On the other hand, if you copy the parameters from the microSD, the setting will be completed in about 1 minute, leading to a 97 % reduction.

Image Zoom