Yosuke Ishii1 Kenji Ooishi1 Yasuki Sakurai1
Plant operators are being forced to handle more advanced and complicated systems with fewer people because of the aging workforce problem. This problem has become a worldwide epidemic and has been inducing critical accidents caused by human errors. Yokogawa has been evaluating a series of Proof of Concepts (PoC) for new operator assistance systems. In particular, the concepts applying Augmented Reality (AR) technology have been highly anticipated by the customers, as AR enhances operator's visual perception, which is the most relied upon of the five human senses. This paper introduces Yokogawa's new operator assistance concepts, based on human-centered design and AR, as well as introducing activities for launching the products, and solutions for achieving above stated goals.
In industrialized countries, social trends such as the aging of workers and the decrease in working population are becoming obvious. Substantial problems such as a lack of skilled engineers and increases in the labor cost of knowledge workers are significantly impacting industrial automation users. These problems cause greater economic loss to the users. In particular, economic loss due to human error including operator faults or oversight is said to be one of the biggest issues for plant operations. In fact, several surveys have reported statistical data showing that more than 70% of current industrial accidents are caused by human errors(1).
In order to overcome this situation, users are intending to secure operators and improve the quality of operators by reducing labor cost through employing human resources from developing countries and enhancing education and training for young plant operators. However, as labor costs are already rising and training to become a skilled engineer takes as long as five to ten years, any satisfactory solutions are currently found neither in the short term nor in the long term.
Yokogawa believes that simply securing and training human resources is not enough for resolving this issue. Recently, reflecting this opinion, bodies for activities relating to human machine interfaces (HMI) taking human factors into consideration have been established with the participation of both users and vendors(2),(3), and various investigation and research activities have been carried out for improving the performance of plant operators, as well as health, safety and environment (HSE) in plants.
Under such circumstances, Yokogawa is reconsidering the human factors in plants, and conducting studies for resolving the problem of human errors in which users are most interested. In this paper, verification activities for a new operator assistance concept using augmented reality (AR) and their results are reported as an example of those studies. AR is a technology which greatly enhances operators' visual perception, which is the most relied upon of the five human senses, and provides intuitive user interfaces not available until now. This paper describes analysis and hypotheses aimed at resolving the human error problem using AR in the first section. The following sections describe examples of a proof of concept (PoC) conducted to verify the hypotheses; technical issues in the AR and activities for resolving them for commercialization; and the current status of the prototype and its field test, as well as future development, respectively in this order.
Defining the problem: human errors due to carelessness
|Figure 1 The number of human errors in each category
(Data source: statistics of accidents and cases in fiscal year 2007
by Ministry of Health, Labor and Welfare, Japan)
Human errors caused by individuals are classified into the following six categories from the perspective of the cause of an incident(4).
Because human errors in category 1) and 6) mainly depend on management of concerned organizations and human morals, appropriate measures should be taken as activities in those organizations as needed. The intrinsic measures against human errors in category 4) and 5) are education and training using manuals or a training simulator, or transfer of knowledge and technical skills through OJT.
In contrast, errors referred to as careless mistakes such as slips and forgetting, categorized into 2) and 3), cannot be prevented by traditional training or discipline for thorough conformance to manuals. Committing these errors does not depend on the years of experience of the operators, but depends on their physical and psychological conditions while working, and so prior education or training cannot prevent them. In fact, the analysis results of human errors indicate that careless mistakes account for the largest ratio in all the human error as shown in Figure 1. Thus, we have concluded that there are few effective solutions for reducing human errors at present.
Improving reliability of operators by controlling human errors
|Figure 2 Error Troika by Professor R. Helmreich
of the University of Texas
Although this study aims to prevent human errors, it is essentially impossible to completely eliminate human errors themselves. To be accurate, the objective of this study is executing 'error management', one of the principles in research on human factors. That is, the objective focuses not on completely eliminating human errors but on minimizing damage caused by them by controlling them. As measures for error management, the following three-stage measures to control human errors are proposed by Professor R. Helmreich of the University of Texas and others as shown in Figure 2(5),(6).
In this study, under the hypothesis that visual enhancement by AR greatly contribute to measures 1) and 2) above, we have created concepts supporting operators taking advantage of AR, such as its potential for intuitive operational feeling and flexible expressive power of information, and then we have evaluated their user value.
|Figure 3 BuddySystem concept|
AR is applicable to various areas, and its definition and interpretation are somewhat different depending on its application area and usage. However, we define AR as a technology for superimposing digital data collected by computers onto the real-world images captured by cameras. Nowadays, typical devices which can be equipped with AR applications are what are called smart devices such as tablets, smartphones and head mounted displays (HMD). Although the concepts and technology of AR have been known for a while now, the spread of high-performance mobile devices and high-speed wireless data communication has rapidly expanded AR's applicability to various areas, including industrial use(7).
We have developed multiple prototypes for concept demonstration to provide images of plant operations to which AR has been applied, and have evaluated its value via surveys from users. Four examples among these are introduced below. The names of these concepts were coined by Yokogawa.
|Figure 4 ARMan concept (Top: electronic
manuals; Bottom: icon for diagnosis)
|Figure 5 RadioLens concept|
When applying AR technology, related objects are recognized in an image on a mobile terminal, and then their contents are overlaid onto them by using authoring techniques. Although the overlaying process can mostly depend on tools on the market, we consider that the recognition process includes unresolved problems in fundamental technologies at present. Objective recognition methods are classified into two main approaches: image recognition and location identification. The most popular means for them are attaching markers such as QR code and positioning by GPS, respectively. As every means has advantages and disadvantages, these means need to be used in combination according to each situation. However, in the plant environment which is the target area of Yokogawa as described in this paper, technologies available today include many problems. For example, image recognition is sometimes difficult due to many shady or dark areas in a plant. In addition, there exist blind spots for GPS in a plant, and vertical positioning accuracy by GPS is not sufficient. For these issues, Yokogawa needs to find ways to resolve them through our own efforts or outsourcing of technologies(8),(9). Yokogawa is aiming to establish technologies for them through field tests, etc.
|Figure 6 TetheredDisplay concept|
Aiming at practical use of AR in a plant, we are now developing a prototype system interconnected with various products including Yokogawa's major product CENTUM VP, and we are planning its field test. Figure 7 shows CENTUM VP and the prototype system interconnected. Although applying AR to plant sites still includes some technical problems as described in the previous section, a part of the prototype system is ready for practical use. Yokogawa will continue to accelerate research and development for reducing human errors, which is the theme of this study, and which results in improvement in operation efficiency and safety, i.e. the user value.
The use of high-performance mobile devices represented by smartphones and tablets is rapidly spreading. Their shipments are already exceeding those of PCs and it is expected that half of the companies in the world will adopt Bring Your Own Device (BYOD) by 2017(10). Although use of mobile terminals in the industrial automation area includes a variety of restrictions such as being explosion proof, their diffusion in this area will progress in the future, and the day will undoubtedly come when plant operators routinely make effective use of them. As a system vendor, Yokogawa is responsible for supporting this diffusion and providing for best usage. The PoC activities introduced in this paper have proven that AR can be effectively applied for mobile terminals to be used at sites. Yokogawa will continue research and development focusing on collaboration with mobile devices, and making efforts to increase user value.
Figure 7 CENTUM VP and prototype system interconnect
* CENTUM and CENTUM VP are the registered trademark of Yokogawa Electric Corporation.
* QR code is the registered trademark of DENSO WAVE INCORPORATED.
Yokogawa ofrece una infraestructura operacional crítica para la automatización de procesos. Nuestro sistema de control distribuido (DCS) permite la automatización y el control de los procesos industriales y un mejor desempeño empresarial. Más de 10,000 plantas confían en el DCS de Yokogawa para cumplir con sus objetivos de producción.