XS530 Wireless Pressure Sensor

XS530 Pressure Measurement Sushi Sensor

Discover Yokogawa's cutting-edge battery-powered wireless pressure sensor for Industrial IoT (IIoT). Combining the XS530 Pressure Measurement Module and XS110A Wireless Communication Module ensures precise gauge pressure monitoring for gases and liquids in harsh environments.

•   Supports hazard location installation
• Sensor's Wi-Fi is capable of communicating up to 6 miles/10 km
•   Battery life of up to 10 years
•   Easily monitor sensor status from a smartphone via NFC.

What Are the Benefits of Wireless Pressure Sensors?

Hazardous Location Installation

The XS530 in combination with the XS110A can be installed in Zone 1 areas, such as petrochemical plants, paint plants, steel plants, and anywhere flammable gas or vapor may exist.

Long-Distance Communication

LoRaWAN has excellent sensitivity reception, good radio interference resistance, and offers a communication distance of six miles (10 km) or more in ideal conditions. This sensor can be installed anywhere needed, covering a vast area.

Modular Design

The design simplifies maintenance. Users can easily replace the battery without removing the XS530 Pressure Measurement Module from the piping.

Excellent Environmental Resistance and Battery Powered

The XS110A supplies power to the XS530 via a built-in replaceable battery that can last up to 10 years. This waterproof, dust-proof, and explosion-proof wireless pressure monitor can operate in harsh environments can be installed anywhere in a plant (no power cables required).

Configure and Monitoring Sensor Status from a Smartphone

Using an Android-based smartphone with a Near Field Communication (NFC) interface makes the Bluetooth transducer configuration and status monitoring of sensors simple and intuitive.

Wireless Pressure Sensor Applications

Online pressure monitoring of gauges
Leakage monitoring of valves
Clogging monitoring of piping and filters

XS110A Wireless Communication Module

WIRELESS SPECIFICATIONS	Communication Protocol	LoRaWAN Class A EU868, AS923, US915
	Data Rate	250 to 11000 bps^*1
	Frequency	Available frequency bands vary depending on the country. Please check General Specifications for details.
	Radio Security	AES 128-bit encryption
	RF Transmitter Power	Max. 7 dBm
	Antenna	Built-in Omni-directional antenna
POWER SUPPLY SPECIFICATIONS	Battery	Lithium thionyl chloride battery (size D): 1 unit Rated voltage: 3.6 V Rated capacity: 19 Ah
PERFORMANCE SPECIFICATION	Update Time	1 minute to 3 days
FUNCTIONAL SPECIFICATION	Output Signal	LoRaWAN^*2
FUNCTIONAL SPECIFICATION	NFC Interface	NFC Forum Type 2 Tag
INSTALLATION ENVIRONMENT	Ambient Temperature Limits	Operating: –40 to 85 °C (–40 to 185°F) Storage: –40 to 85 °C (–40 to 185°F)
REGULATORY COMPLIANCE STATEMENTS	Degrees of Protection	IP66/IP67 and Type 4X Apply when connected to the Measurement Module.
REGULATORY COMPLIANCE STATEMENTS	Explosionproof	ATEX, IECEx, FM
PHYSICAL SPECIFICATIONS	Housing Material	Plastic (PC)
PHYSICAL SPECIFICATIONS	Weight	300 g (0.66 lb)^*3

*1: Available data rate vary depending on the country.
*2: For detail on channel plan, refer to General Specifications.
*3: Without battery

XS530 Pressure Measurement Module

MEASUREMENT RANGE	*Gauge Pressure ^1**	Range	Measurement Range	Maximum Pressure
		-E	-0.1 to 5 MPa^*2 (–14.5 to 720 psi)	7.5 MPa(1080 psi)
		-H	-0.1 to 35 MPa^*2 (–14.5 to 5070 psi)	50 MPa(7250 psi)
	Temperature	–40 to 85°C (–40 to 185°F)
PERFORMANCE SPECIFICATIONS	Measurement Accuracy	Pressure^*3: ± 0.25% of Full scale Temperature: ± 5°C typ.
	Update Time	1 minute to 3 days
	Battery Characteristics	Battery life is 10 years under the following conditions^*4 • Ambient temperature: 23 ± 2°C • Update Time: 1 hour
FUNCTIONAL SPECIFICATION	Fluid to be Measured	Gas, Liquid
INSTALLATION ENVIRONMENT	Ambient Temperature Limits	Operating: –40 to 85°C (–40 to 185°F) Storage: –40 to 85°C (–40 to 185°F)
INSTALLATION ENVIRONMENT	Process Temperature Limits	–40 to 120°C (–40 to 248°F)
REGULATORY COMPLIANCE STATEMENTS	Degrees of Protection	IP66/IP67 and Type 4X Apply when connected to the XS110A.
REGULATORY COMPLIANCE STATEMENTS	Explosionproof	ATEX, IECEx, FM
PHYSICAL SPECIFICATIONS	Process connection	1/2 NPT female, 1/2 NPT male
	Housing Material	Stainless Steel
	Material of Process Connection	Diaphragm: Hastelloy C-276^5 Process Connector: 316L SST^6
	Weight	600 g

*1: Pressure measurement span cannot be changed
*2: Refer to Fig.1 if the pressure is below atmospheric pressure.
*3: Measurement Accuracy will be changed when electromagnetic noise is applied.
*4: Environmental conditions such as vibration may affect the battery life.
*5: Hastelloy C-276 or ASTM N 10276(equivalent to Hastelloy C -276)
*6: 316L SST or ASTM grade 316L