I will update from the SKYD-200*A to the SKYD-200*R or *S. On the SKYD-200*A the lock up width (hysteresis) is 2% of span or less, and the dial setting sensitivity is ±5% of span, but what lock up width (hysteresis) should I set on the SKYD-200*R or *S?

Input a simulated signal from a standard generator to the SKYD-200*A and check the voltage of the ON and OFF points of the alarm operation. Next, set the hysteresis to the data that is converted to % of *R or *S.

Productos y Soluciones Relacionadas

  • YS80 Series Rack Instruments

    The Style R and Style S models have completely interchangeable I/O specifications, terminal arrays and shapes. They can be replaced with the latest devices just by replacing the internal instruments, leaving the wiring intact.

    Leer Más

Top