Chemical Feed

다운로드 (2.8 MB)

Introduction

This paper introduces the ADMAG AXR 2-wire magnetic flomwmeter solution for chemical feed application.

Expected benefits

  • Cost reduction of supporting infrastructure by US$1,000 to $2,000 per unit.
  • Lifetime energy savings.
  • 4-wire comparable stable and accurate process control to maximize the productivity.

Application

ADMAG AXR
ADMAG AXR
  • The chemical feed application is one of the common application in various industry, and the accurate and stable flow measurement is the key to optimize the process control, and the performance of plant operation.
  • When the conductivity of the chemicals and main process is different, the injection brings sudden conductivity change and a non-uniform distribution of conductivity in the process.
  • The measurement stability under the fluid condition change is very important factor to be applied in the control loop, and traditionally, 4-wire magnetic flow meter is applied for the flow measurement of control loop.
 

 

Yokogawa's improved solution:

  • Newly released 2-wire ADMAG AXR series delivers dual benefits, 4-wire comparable excellent performance and cost reduction of 2-wire system in various applications.

1. Best-in-class performance.

The ADMAG AXR is the world's first 2-wire magnetic flow meter which employs the unique "Dual Frequency Excitation Method*1), "achieving 0.5% of rate of best-in-class accuracy and excellent stability for process measurement. In addition, the newly developed AXR key technologies*2)," achieves the same level of noise immunity as 4-wire type under the fluid condition change and delivers enough performance to meet the requirement to apply in the control loop.

*1) Dual Frequency Method

The dual frequency method successfully combines the best properties of low frequency excitation enabling the stability in measurement, and high frequency excitation delivering excellent noise immunity. As a result, AXR can suppress process- generated noise securing zero stability without sacrificing fast response time.

*2) AXR Key Technologies

AXR Key Technologies(1) Super-high density coil
Yokogawa has developed a perfectly aligned "super high density" coil winding technique to maximize the S/N ratio. This new technology increased the number of coil turns by 1.5 times compared to 4-wire magemeters, and successfully increase the signal portion of S/N ratio.

(2) Mirror finished lining
Rough lining surface is likely to generate turbulent flow near electrodes, which results in larger flow noise. AXR employs a mirror finished lining to ensure a smooth surface. It minimizes flow noise by reducing the flow turbulence.

Evaluation test (Internal Test):

Salt Injection TestApplication: Salt injection
Normal flow velocity: 2 m/s
Damping: 5 sec.
Test Model: AXR080G

The salt injection test was conducted to simulate a chemical feed application. AXR is installed serially with AXF 4 wire-type, and the concentrated salt water was injected in tap water 6 times. Salt injection will bring a sudden conductivity change and a non-uniform distribution of conductivity in the process. The ADMAG dual frequency excitation method filtered out the noise spike generated by the salt injection. As proven in the results of the conductivity and salt injection tests, AXR premium performance has extended the application range of 2-wire mags. AXR can be used in process control loops in the chemical industry.

2. Cost Reduction & ECO Friendly

4-wire (AXF) 2-wire (AXR) 
4-wire (AXF) 2-wire (AXR)

The ADMAG AXR 2-wire magnetic flow meter can be installed in the 2-wire system without any AC power source, thus drastically reducing the initial instrumentation cost, and power consumption. The power consumption of 2-wire type is only 1-4% of that of 4-wire type, and contributes to the operation cost reduction. In addition, over 96% reduced power consumption contribute to the life time energy saving and reduce the carbon foot print.

Estimated cost reduction:
Initial Cost compared to 4-wire (cable length 100m)

Cable: $2 -$3/m
Conduit pipe: $5 -10/m (including construction cost)
Power supply unit: $300

US $1000 - $2000 /unit cost saving

CO2 reduction:
46kg CO2 excretion can be reduced to 1.2kg /year

업종

  • 수처리

    Yokogawa는 수처리 설비의 더욱 안정적인 운영을 위한 최적의 솔루션을 제공합니다. 이러한 솔루션에는 정교한 기술, 탁월한 제품 품질 및 라이프 사이클 전반에 걸친 광범위한 애플리케이션 노하우가 포함됩니다.

    See More
  • 정수 및 하수 처리

    Yokogawa는 보다 효율적인 사회를 만들기 위하여 에너지 최적화 기술 개발, 온실가스 감축, 오염 물질로부터 환경을 보호하는 견고한 제품 제작 등을 통해 지속 가능한 수자원 생산을 위한 제어 솔루션을 제공하고 있습니다. Yokogawa의 첨단 기술과 폭넓은 애플리케이션 노하우를 통해 고객과 협력하여 사업을 활성화하고 플랜트 수명주기 전반에 걸쳐 높은 가치를 제공할 수 있는 지속 가능한 솔루션을 제공합니다. 당사의 기술과 제품은 플랜트의 성능을 향상시키고 오늘날의 수자원 시장에서 경쟁적으로 운영할 수 있도록 보장하며 운영비를 절감합니다. Yokogawa는 지자체 및 공업용수 처리 시장에서 광범위한 수처리 응용 분야를 지원합니다.

    See More
  • 특수화학 및 정밀화학

    Yokogawa는 오랫동안 특수 및 정밀 화학 시장에서 고객을 지원해왔습니다. Batch 솔루션 설계의 복잡한 요구 사항을 이해하는 업계 전문가는 물론 업계 최고 수준의 안정성과 유연성을 제공하는 시장 선도 일괄 처리 솔루션을 사용하면 Yokogawa와의 파트너십에서 안전 및 규정 준수를 유지하면서 고객의 요구 사항을 충족시키는 제품을 생산할 수 있습니다.

    See More
  • 폐수처리

    폐수 처리 설비는 많은 모터, 펌프, 송풍기 등을 사용하기 때문에 운전 비용을 줄이기 위해서는 전력 소비를 줄이는 것이 중요합니다. Yokogawa는 에너지 효율성을 높이기 위한 최적의 제어 솔루션을 제공합니다. 

    See More
  • 화학

    화학 플랜트는 연속 및 Batch 생산 공정에 의존하며, 각각은 제어 시스템에 대한 다양한 요구 사항을 제시합니다. 연속 공정은 실패하지 않고 생산 라인을 중단시키는 견고하고 안정적인 제어 시스템을 필요로하는 반면, Batch 공정의 중요성은 수식, 절차 및 공정을 조정하는 데 있어 큰 유연성을 허용하는 제어 시스템을 갖추는 데 있습니다. 두 종류의 시스템 모두 제품의 사용 가능한 품질 내역에서 관리되어야 하며 비일상적인 작업을 수행할 수 있어야 합니다. Yokogawa는 광범위한 제품 포트폴리오, 숙련된 시스템 엔지니어 및 글로벌 영업 및 서비스 네트워크를 통해 모든 공장 공정에 대한 솔루션을 제공합니다.

    See More

Related Products & Solutions

  • 전자 유량계

    Yokogawa의 전자 유량계에 대해 수십 년의 경험을 가지고 있습니다. 당사의 전자 유량계는 대부분의 산업 분야에서 유연한 구성을 제공합니다.

    See More

Top