Construct a High-Speed Data Acquisition System with Ethernet-Enabled Controllers and PLC

This introduces a system that uses Ethernet communications to acquire measured values, target values, and control output values from a controller installed on site into a PLC at high speed (ten units' worth within one second).

High-Speed Data Acquisition System with Ethernet-Enabled Controller

The Ethernet communication function that can be included with the UT55A/UT35A supports 100BASE-TX and 10BASE-T. By using the high-speed response mode that comes standard with the Ethernet function, the instruments can respond rapidly to requests for data from (upstream) PLC's and other devices. Since measured and other data are stored in the Ethernet-specific registers inside the UT, the data can be retrieved at high speeds by upstream devices by accessing those registers. Data that can be acquired with high-speed response are: PV values, SP values, MV values, error information (PV input or A/D operation), alarm ON/OFF statuses, and other information such as RUN/STOP. Using the gateway function, you can connect with up to thirty-one other RS485-enabled (Modbus protocol) controllers via RS485. Of those, up to eight (including the UT55A/UT35A) can use high-speed response mode for high-speed data acquisition.

업종

Related Products & Solutions

Mid-level UT55A/UT52A

UT55A/UT52A 온도 컨트롤러는 네비게이션 키와 함께 읽기 쉬운 14 세그먼트 대형 컬러 LCD 디스플레이를 채택하여 모니터링 및 작동 기능을 크게 향상시켰습니다. 또한, 래더 시퀀스 기능도 표준으로 탑재하고 있습니다. 컨트롤러의 깊이가 짧아 공간을 절약할 수 있으며 이더넷 통신과 같은 개방형 네트워크도 지원합니다.

UT35A/UT32A

UT35A/UT32A 온도 컨트롤러는 네비게이션 키와 함께 읽기 쉬운 14 세그먼트 대형 컬러 LCD 디스플레이를 채택하여 모니터링 및 작동 기능을 크게 향상시켰습니다. 또한, 래더 시퀀스 기능도 표준으로 탑재하고 있습니다. 컨트롤러의 깊이가 짧아 공간을 절약할 수 있으며 이더넷 통신과 같은 개방형 네트워크도 지원합니다.

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

Top