SA stands for SENCOM Adapter (Model SA11). This is one piece of a new product platform. The SENCOM 4.0 series has been released to replace the original SENCOM product line from Yokogawa. The new SENCOM 4.0 SA11 Smart Adapter uses a similar digital process to measure the process values, store data, perform calibrations, and report data to a host system. One obvious difference is that the SA11 Smart Adapter is a separate device, not permanently attached to the sensor as the original SENCOM sensors are. The SA11 is part of our SENCOM 4.0 platform, consisting of an FLXA402 transmitter, a Sensor with a Variopin connector and ID Chip (i.e., FU20-VS or FU24-VS), and Cables.
Related Products & Solutions
-
All-in-One pH/ORP Sensor Series FU20 and FU24
FU20과 FU24, pH와 ORP가 일체형인 센서는 Yokogawa가 "Simple is best"라는 모토를 센서 기술에 어떻게 적용하는지 보여줍니다.
-
Digital SMART SENCOM™ Adapter, SA11
Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.
-
다중 채널 4-wire분석기 FLXA402
FLEXA™ 시리즈 분석기는 산업에서 지속적으로 온라인 측정에 사용되는 모듈식 디자인의 분석기입니다. 이 분석기는 단일 또는 다중 센서 측정을 제공합니다.