Korea KR   
Turbidity/Chlorine SMART Sensor Platform
Liquid Analyzers

Turbidity/Chlorine SMART Sensor Platform

1959년부터 수처리장에서 신뢰할 수 있는 탁도 및 염소 측정 지원
일본 시장의 공정분석기 1위 공급 업체*

"우리의 임무는 모든 사람들에게 깨끗한 물을 공급하는 것입니다."

“인간의 건강과 안전한 물이 우리의 출발점입니다.”

"유지 보수 시간과 비용을 줄이는 것이 우리의 가장 큰 관심사입니다."

많은 고객이 이러한 문제에 직면하고 있습니다. SENCOM ™ 4.0 플랫폼이 이러한 문제를 해결합니다.

YOKOGAWA는 신뢰할 수 있는 감지 기술과 데이터 활용을 통해 제품의 전체 수명 주기를 지원합니다. SENCOM 4.0 플랫폼을 탁도 측정과 염소 측정으로 확장했으며 제품의 전체 수명 주기 동안 고유한 가치를 계속 제공할 것입니다.

1980년대에 출시된 EXA 시리즈와 그 후속 제품인 EXA450시리즈는 2005년에 출시되었으며 FLEXA 시리즈는 2010년대에 출시되었습니다. EXA/FLEXA 분석기는 광범위한 고객 요구를 충족하는 탁월한 가치로 인해 전 세계적으로 사용되고 있습니다. 앞으로 SENCOM 4.0 플랫폼은 측정에 대한 더 많은 통찰력을 제공하고 클라우드 연결 기능 및 데이터 이동성과 같은 향상된 기능을 강화하여 제품의 전체 수명 주기 동안 더 신뢰할 수 있는 데이터를 제공할 것입니다.
*2019 년 Yokogawa 설문 조사 기준

스마트 시티 시스템을 통한 지속 가능한 물의 순환

Sustainable water Cycle by smart city system

Details

SENCOM 4.0 플랫폼: "SEE MORE, DO MORE"

Simplified Selection

단순화된 선택

FLXA402T는 동시에 여러 측정을 할 수 있는 분석기로, CAPEX 및 OPEX의 절감을 지원합니다.

Expert Guide

전문가의 가이드

이해하기 쉬운 알람 설정 및 자세한 문제 해결 정보와 함께 직관적인 메뉴 구조는 온라인 프로세서 제어 측정의 신뢰성을 높입니다. 

Process Guard

프로세스 가드

사전 예방적 유지 보수를 위해 실시간 진단 및 소모품 수명 모니터링으로 다음 유지 보수 및 소모품 교체를 예측합니다.

Maintenance Manager

유지 보수 관리

현장에서 정기적인 유지 보수 및 교정은 매월 또는 격주로 측정 당 30분 정도 걸릴 수 있습니다. 자동 영점 보정 기능은 측정 셀을 세척하고 예정된 시간에 자동으로 보정합니다. 또한 SENCOM 4.0 플랫폼은 "플러그 앤 플레이" 기능을 활용하여 현장에서 분석기를 조정할 필요가 없으며 측정 무결성을 높이면서 가동 중지 시간을 크게 줄입니다.

Advanced Flexibility

고급화된 유연성

FLXA402T 듀얼 채널 유닛은 측정 파라미터를 탁도, 염소, pH 또는 전도도와 함께 혼합하고 일치시킬 수 있습니다. 탁도 및 염소를 SMART Sensor 플랫폼에 추가하여 하나의 "소형 물 모니터링 시스템"으로 "스마트 시티"를 달성할 수 있습니다.

Data Mobility

데이터 이동성

새로운 기술의 가치 실현 시간을 단축하고 유연성, 단순성 및 효율성을 제공하여 데이터와 워크로드를 지속적으로 원활하게 이동시킬 수 있습니다.

 

The SENCOM SMART Sensor System

4-wire SMART Sensor Platform for Turbidity/Chlorine FLXA402T

기술이 변경되어도 처리량이나 품질, 규정 준수에 미달하는 부정적인 결과를 초래할 수는 없습니다. 고급화된 유연성 기능은 다중 입력 기능을 갖추고 있어 한 번에 최대 2개의 센서를 연결할 수 있습니다.

FLXA402T는 새로운 SMART 센서, 탁도 분석기/염소 분석기를 디지털로 연결하여 향후 디지털 SMART 센서로 쉽게 업그레이드할 수 있어 유연성을 높이고 OPEX를 최적화할 수 있습니다.

더 알아보기

2 in 1 FLXA402T and TB820D, FC800D

Digital SMART SENCOM과 연결 가능한 센서

FLXA402T and TB820D, FC800D

탁도 측정

세척이 쉬운 셀 구조, 자동 세척 시스템, 수명이 긴 광원

염소 측정

염소 주입 최소화, 원격 유지 보수 및 유지 보수 시간 단축

pH 및 전도도 측정

Yokogawa의 pH 및 전도도 센서는 신뢰성이 높고 유니크한, 가장 가치 있는 센서입니다.

pH and Conductivity sensors

Analyzer specialized for water applications

Water Treatment Application

Water Purification Treatment

1 Sedimentation pH, Conductivity, Turbidity
2 Stabilization pH, Chlorine
3 Flocculation pH, Turbidity, Chlorine
4 Settling Basins pH, Turbidity, Chlorine
5 Chlorination Chlorine
6 Clean water reservoir pH, Turbidity, Chlorine
7 Distributing pump pH, Turbidity, Chlorine
8 Distribution tank & Piping pH, Turbidity, Chlorine, Pressure, Temperature

Wastewater Treatment

1 pH adjustment pH, ORP
2 Chemical precipitation pH
3 Flocculation pH
4 Aeration DO, MLSS
5 Discharge/Reuse pH, Turbidity, Flow

자료실

Do we need to configure the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-01)
You don't need to do any difficult setting. The FLXA402T configurations have already optimized for selected measurement when it is shipped.
It has two input modules in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine), what can be connected on each module?
(an-flxa402t-02)
FLXA 402T Multi Sensor variation 1st module TB820D FC800D FC800D FC800D FC800D TB820D TB820D 2nd module TB820D FC800D TB820D Analog pH Analog Conductivity Analog pH sensor Analo...
How many decimal points can the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) show?
(an-flxa402t-03)
Maximum digit is three decimal points, default is 2 decimal points.
Can the Auto Range switching in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) be turned off?
(an-flxa402t-04)
Yes, it can be turned off.
Which buffer tables pH are available in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-05)
PH4, pH7 and pH9 tables complied by NIST, DIN and US standards are available.
Can we measure pH and ORP with the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-06)
The FLXA402T can connect a pH sensor, but an ORP sensor is not available. For ORP measuring, please select the FLXA402. (Not FLXA402T)
Can we measure conductivity and resistivity in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-07)
Conductivity measuring is available in the FLXA402T. For resistivity measuring, please select the FLXA402. (Not FLXA402T)
Which conductivity sensors can connect to the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-08)
Static conductivity sensor is available. Inductive conductivity sensors are not available. For inductive conductivity sensor measuring, please select the FLXA402. (Not FLXA402T)
Can the 2nd module for pH in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) be configured for a Wash function?
(an-flxa402t-09)
Ultrasonic cleaning is available.
Can we use ultrasonic cleaning for both Turbidity detector in case of two Turbidity detector connection (FLXA402T with two TB820D)?
(an-flxa402t-10)
Yes, FLXA402T+PG400 supports ultrasonic cleaning for both Turbidity detectors.
Can we reduce pH dependency by using external pH sensor for compensation in the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) measurement?
(an-flxa402t-11)
Yes, you can use pH compensation for -F1 model. Please use this function in case of fluctuate pH value. If it is difficult to decide which is better, please fill pH fluctuation in the Inquiry Sheet and contact us. ...
Are the filters for the TB820D (Right Angle Scattered Light Turbidity Detector) same as those of TB750G?
(an-flxa402t-12)
Yes, 0.2μm mesh filter and 1.0μm mesh filter for TB820D are same as TB750G. You can select zero turbidity filter in case; Measuring range is 2.0 NTU or greater: 1μm Measuring range is less than 2.0 NTU: 1μm + 0.2μm ...
What is the maximum cable length between the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) and analyzers?
(an-flxa402t-13)
Maximum 20m is available. If you want to use more than 20m cable, please contact us.
Do we need to adjust optics after light source replacement in the TB820D (Right Angle Scattered Light Turbidity Detector)?
(an-flxa402t-14)
No, you don’t need to do any adjustment. Just replace light source.
Can we buy the TB820D (Right Angle Scattered Light Turbidity Detector) flow-cell?
(an-flxa402t-15)
Yes, you can buy flow-cell and glass windows as a spare part.
What is the TB820D (Right Angle Scattered Light Turbidity Detector) head tank difference between D1, D2 and D3? Is head tank necessary?
(an-flxa402t-16)
We strongly recommend using head tank in any case for stable measurement. If your facility has enough pretreatment and there are no bubbles, you can install the TB820D without head tank. D1 pressurized head tank is suitable for under 2 NTU measuremen...
What is included in K9411UA (1μm Zero Filter Assembly) and K9726EF (0.2μm Zero Filter Assembly) for the TB820D (Right Angle Scattered Light Turbidity Detector)? Do we need to buy K9008ZD (Filter Element 1μm) and K9726EG (Filter Element 0.2μm)?
(an-flxa402t-17)
K9411UA and K9726EF consist of filter case and filter element. K9008ZD and K9726EG are only filter element and you can use them in case of filter replacement.
What are the standard consumables for the TB820D (Right Angle Scattered Light Turbidity Detector) and how often do they require replacement?
(an-flxa402t-18)
Parts No. Name Remarks QTY Recommended Replacement Period K8003DN LED ASSY (Red Light) For code – NT. RED light source. For red light sources. 1 3 years K8003DP LED ASSY (Infrared Red Li...
Can we save and copy the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) configurations?
(an-flxa402t-19)
Yes, you can save and copy the FLXA402T configurations by SD card. It realizes easy installation and replacement.
What is the difference in construction on the electrode for F1 & C1 in the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit)?
(an-flxa402t-22)
The rotating electrode material changes. -F1 = Gold electrode+celamic beads. -C1 = Gold/Platinum alloy+glass beads. They change the plateau characteristic and reduce combined chlorine sensitivity. On the other hand, available pH range becomes smaller...
What are the maintenance parts for the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit)?
(an-flxa402t-23)
Parts No. Name Remarks QTY Recommended Replacement Interval K8005JB Measurement electrode (rotating electrode) Gold electrode for –F1,－F2, and –F3 1 Yearly K8005JC Measurement electro...
What are the maintenance parts for the RC800D (Reagent Type Residual Chlorine Sensor Unit)?
(an-flxa402t-24)
Parts No. Name Remarks QTY Recommended Replacement Interval - Primary acetic acid (CH3COOH) grade: over 99.0+% For reagent preparation -   - Sodium acetate (CH3COONa) grade: over 98.0%...
Why is the RC800D (Reagent Type Residual Chlorine Sensor Unit) required air purge?
(an-flxa402t-25)
Air purging is required for electrode unit and liquid pump by air pump or compressor air (industrial air). It is required to protect electrode from chlorine gasses which will affect the metal parts.
Are the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit) suitable for outdoor installation and having any anti corrosive coating for outdoor environment?
(an-flxa402t-26)
The FC800D and the RC800D are not suitable for outdoor installation. Strongly recommend installing inside because of pump structure. If you want to install outside, a separate rainproof cover is required and take care install place environment (no co...
Can you switch the measurement ranges on the transmitter, or do we have to specify the ranges when ordering in the TB820D, the FC800D or the RC800D ?
(an-flxa402t-27)
Within ordered range, you can set the FLXA402T analog output range seamlessly. Cannot change ordered analyzer measurement range.
What would happen if we don’t replace the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit) beads?
(an-flxa402t-28)
Beads become gradually smaller because of friction, and decreases cleaning efficiency. So, we recommend replacing beads once a year.
What is empty cell detection for the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit)?
(an-flxa402t-20)
Rotation electrode will get damaged in case there is no water in the measurement cell. To avoid this situation, the FC800D and the RC800D measurement electrode rotation is automatically stopped. This function makes rotation electrode lifetime longer ...
What are the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) measurement ranges?
(an-flxa402t-21)
  -F1 -C1 -F2, -F3 Chlorin conc < 1 mg/L >1 mg/L < = 3 mg/L < = 3 mg/L < = 5 mg/L < = 10 mg/L pH pH: 6 to 8 pH: 6.5 to 7.5 pH: 6.5 to 7.5 pH: 6.5 to 7.5 ...

Downloads

Brochures
Instruction Manuals
General Specifications
Technical Information

동영상

Product Overview
Smart Water Management System providing clean and safe water
Thumbnail
Overview:

For more details, visit "www.yokogawa.com/CL-TB/"

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의
Top