Batch Control Package "CS Batch 3000" For CENTUM CS 3000

Descargas (124 KB)

SHIMADA Chiaki1 ITO Hiroki1 TANAKA Hiroshi1 David EMERSON2

We have developed CS Batch 3000, a suite of batch control software applications for implementation of recipe management and process management for the CENTUM CS 3000. CS Batch 3000 manages and controls batch production process by coordinating the use of plant equipment, formula data, and procedural logic to produce products. CS Batch 3000 conforms to IEC/61512-1, an international standard of batch control. This paper outlines CS Batch 3000.

  1. Industrial Automation Systems Business Division
  2. Yokogawa Corporation of America


Recently, manufacturing industries are trying to slash the total cost of ownership (TCO). Batch processes are not exceptions. Until recently, in comparison to continuous processes, batch processes have generally not yet undergone systematization and standardization. The attention of the public has been drawn to batch processes because a batch process provides an agile production method that can promptly adapt to the changes in market needs and new requirements. Nevertheless, batch processes are so diversified that many problems need to be solved in order to create an efficient system. Furthermore, adaptability to an open environment is also required. To meet these demands we drew on many years of expertise gained from configuring a great number of control systems for batch processes to develop the CS Batch 3000 batch control package, which conforms to the international standard, IEC/61512-1.

ISA/SP88, NAMUR, and IEC TC65 are well-known international workgroups that discuss and research batch control systems and the standardization of batch control is being promoted by and information is being exchanged between the World Batch Forum, European Batch Forum, and Japan Batch Forum. CS Batch 3000 conforms to IEC/61512-1, which defines the standard of the terminology and models of batch control that were previously defined by ISA/S88.01.


CS Batch 3000 has the following features:

  1. Ease of operating batch processes
  2. Improved engineering efficiency
  3. High reliability
  4. Compliance with international standards of batch control

The employment of an IBM PC/AT-compatible computer running the platform Windows NT for operation and monitoring functions and engineering functions for recipe generation offers high costs performance. While, for batch control and unit control, high system reliability is guaranteed by using Yokogawa's original hardware, which incorporates leading-edge technology.


Figure 1 Software Configuration of CS Batch 3000

ISA/S88.01 defines seven activities in the control activity model. In accordance with these seven activities, CS Batch 3000 provides the two activities enclosed by thick lines in Figure 1.

Controlling a batch process involves the control of two different aspects: control of each equipment unit and control of each batch (of products to be produced). When producing a single brand of products, management of batches is rarely needed.

Recipe management provides functions to generate and edit master recipes. Process management provides functions to create control recipes based on specified master recipes, and perform management of batch executions based on the control recipes. Unit supervision implements control of each equipment unit (simply referred to as 'unit'), such as a reactor, by controlling equipment modules and control modules. Sequences and batches are executed in field control stations (FCSs) since they require high reliability, thus allowing the sequence control to be completed in the event that the computer fails.


Figure 2 Recipe Types

Recipe management is composed of functions to categorize recipes into groups, and generate, edit, save, and load master recipes to process management. To maintain the security and independence of these functions, the software of recipe management is made as independent of the system generation functions as possible.

A recipe prescribes the group of units, procedure, and method to be used, and the parameter values to be set in order to produce a particular product. ISA/S88.01 classifies recipe types into four hierarchical levels depending on the activities to be done at each time and the resources required, as shown in Figure 2. Recipe management of CS Batch 3000 performs the management of master recipes. Each recipe consists of four parts:

  1. Header: contains the basic information for recipe management, such as the recipe name, comment, version, and author.
  2. Procedure: Graphically defines the procedure to produce the product in the form of a sequential function chart (SFC).
  3. Formula: Parameter values such as control settings for producing the product.
  4. Equipment Requirements: Defines the requirements of equipment for producing the product, such as equipment units to be used.

Procedure Types

Each recipe procedure is an ordered set of unit procedures, each of which is an ordered set of operations.

  1. Figure-3-Procedure-Structure
    Figure 3 Procedure Structure
    Recipe Procedure: Defines the order of execution of unit procedures graphically.
  2. Unit Procedure: Defines the sequential procedure to be completed within a particular unit by specifying the order of execution of sequences called operations in the form of SFC.

One merit of recipe management and process management is that the order of operations can be modified by altering the unit procedures and/or recipe procedure for each recipe.

Recipe procedures and unit procedures are generated using recipe management. Operations and phases are generated using the unit supervision. Thus hierarchically defined sequential procedures facilitate modification of the sequential order, reuse of operations and unit procedures, and concurrent engineering, as well as leading to drastic improvement of efficiency. Figure 3 illustrates an example of procedure structures.

Editing of Recipe


Figure 4 Editing a Recipe

The Recipe View window of CS Batch 3000 displays a tree of hierarchically structured recipes in the left pane, similar to the way Windows NT Explorer displays folders and files, so the user can find and select the desired object (recipe) at ease. Recipe View is the start of generating and modifying the header, procedure, formula, and equipment requirements of each master recipe, as shown in Figure 4.


Process management performs execution control of batch production, including the monitoring of recipe statuses, supervision of individual batches by using batch IDs and the acquisition of batch results and batch-related messages. Process management performs these activities based on each control recipe that is converted from a master recipe, and defines parameter values and other information required to produce a batch.

Human Interface

Figure 5 Operation and Monitoring
Windows of Process Management

Operation and monitoring windows of an HIS display the hierarchical structure of process cells, control modules, and equipment modules consistently. In the same manner, control recipes for individual batches can be classified into groups so that process operation can be done in two different ways: operation of each equipment unit and operation of each batch. The window for monitoring each batch can also be opened from a hierarchical tree view of batches in each group. This tree view is not only used to retrieve a window for the monitoring of a batch, but also indicates the status of each control recipe by changing the color of the icon.

In CS Batch 3000, dynamically changing batch IDs are handled as batch ID objects which can be exchanged with one another over windows to display alarm and graphic windows for a specified batch. Batch ID objects allow the monitoring of each equipment unit as well as monitoring of each batch. Figure 5 shows examples of operation and monitoring windows.

Batch Report Function

The batch report function acquires data and messages recorded during the execution of each batch and prints them out. The user can freely create reports using Microsoft Excel. In addition to the data that should be acquired during the execution of each batch, such as process data, setting data, quality data, and manually entered data, process management sorts alarm event messages and operation records with the user names by batch ID and outputs them for each batch ID.


Figure 6 Operation and Monitoring
Windows of Unit Supervision

Unit supervision is a set of functions to systematize process equipment modules and control modules for each equipment unit such as a distillation column and reactor in order to operate and control each equipment unit. Systematizing control modules for individual equipment units has the merit that engineering, operation, monitoring, and control can be performed in respect of individual equipment units consistently. Unit supervision provides the following advantages:

  1. Engineering, operation, and monitoring can be done in respect of each unit, such as a reactor.
  2. Procedural sequences can be coded hierarchically in SFC.
  3. Independent of the control in each sequential phase, interruption sequences such as an emergency stop and a monitoring sequence can be coded in SFC.
  4. The user can advance the sequence from one phase to another on an SFC.
  5. Unit procedures are carried out in an FCS, thus assuring high reliability of unit control.

Figure 6 shows examples of operation and monitoring windows. Unit supervision is not merely used together with process management for control of the batch process but is also applicable to the continuous process. Unit supervision is included in the basic control functions of the CENTUM CS 3000 to facilitate the buildup of a system.

The virtual test function using FCS simulators covers unit supervision and process management. Just with a notebook PC, all engineering from the generation of recipes to the debugging of batch control can be performed.


CS Batch 3000 has an open and standardized interface, thus allowing other systems to be easily connected for future expansions and for flexibly configuring an overall system of Enterprise Technology Solutions.

Exanalp II, a Yokogawa software product, performs production planing and scheduling, and CS Batch 3000 provides interface to production planing and scheduling. (See Figure 1) Also, production information management can easily be connected to CS Batch 3000 via interfaces based on the technology of OLE and DCOM3. The aforementioned batch report function is implemented by using these interfaces.

We are considering the development of a product compliant to the specification of recipes that is currently being considered for standardization by SP88.


This paper introduced the CS Batch 3000 batch control package and focused on its recipe management and process management. CS Batch 3000 is designed to allow the user to configure, start up, and operate batch control with high flexibility and expandability while maintaining excellent reliability.

Activities to standardize a specification require a great deal of energy. Activities to implement SP88 standardization are carried out not only by volunteers, but also by companies as part of their business. Participation in standardization workgroups strength- ens the competitiveness of a company. We are committed to con- tributing to the furthering of the standardization of batch control and together with our users aim to continue with the development of batch control functions.


  1. Shimada C., Nakahara M., Sakamoto H., "CS Batch Recipe Management, Process Management Package," Yokogawa Technical Report, No. 21, pp. 13-17, 1996
  2. Sakamoto H., Kano T., "SP88 and CS Batch," Yokogawa Technical Report, No. 21, pp. 1-4, 1996
  3. Acronym for Distributed Component Object Model; the version of Microsoft's Component Object Model (COM) specification that stipulates how components communicate over Windows-based networks.
  • Product and company names appearing in this report are trademarks or registered trademarks of respective holders.


  • Agua y agua residual

    Yokogawa ha estado suministrando soluciones de control para la producción hídrica sostenible desarrollando tecnología con mayor eficiencia energética, ayudando a reducir la huella de carbono de las operaciones y fabricando productos de gran solidez que protegen el ambiente contra los contaminantes. Con nuestra tecnología de vanguardia y amplios conocimientos de las aplicaciones, trabajamos con usted para proveer soluciones hídricas sostenibles que impulsen su negocio y agreguen alto valor a lo largo del ciclo de vida de la planta. Nuestra tecnología y nuestros productos mejoran el desempeño de las plantas y garantiza que puedan operar competitivamente en los mercados del agua de hoy, así como reducir sus costos operativos. Yokogawa brinda apoyo en una amplia gama de aplicaciones para el control del agua en los mercados del agua tanto públicos como privados.

    Leer Más
  • Energía

    A mediados de la década de 1970, Yokogawa inició su participación en el negocio de la energía con el lanzamiento del Sistema de control eléctrico EBS. Desde entonces, Yokogawa ha continuado firmemente con el desarrollo de nuestras tecnologías y capacidades para proveer los mejores servicios y soluciones a nuestros clientes en todo el mundo.

    Yokogawa ha operado la red de soluciones de energía globales para jugar un papel más activo en el dinámico mercado de energía global. Esto ha hecho un posible un trabajo en equipo más unido dentro de Yokogawa, el cual conjunta nuestros recursos globales y nuestra especialización en la industria. Los expertos en el sector de energía de Yokogawa trabajan juntos para brindar a cada cliente la solución que se adapta mejor a sus requerimientos sofisticados.

    Leer Más
  • Energía de biomasa

    Cada vez con mayor frecuencia la biomasa aparece en las noticias en estos días, porque es una fuente de energía renovable que puede ayudar a las centrales termoeléctricas a reducir sus emisiones de dióxido de carbono. Los sistemas de Yokogawa se utilizan en todo el mundo en todo tipo de centrales eléctricas, incluidas las que utilizan biomasa. Las tecnologías de control  y medición de Yokogawa hacen posible que estas plantas operen de manera más eficiente y reduzcan su huella de carbono

    Leer Más
  • Energía geotérmica

    La energía geotérmica puede generar un suministro estable de electricidad durante todo el año, ya que no depende de las condiciones meteorológicas. Además, como no hay combustibles que se quemen por encima del suelo y solo se liberan muy pequeñas cantidades de dióxido de carbono, es amigable con el medio ambiente. Hay abundantes recursos geotérmicos a lo largo del cinturón del Pacífico (también conocido como el "anillo de fuego"), en países como Japón, Filipinas, Indonesia, Nueva Zelanda, México, Costa Rica y Estados Unidos, así como Islandia, Turquía, e Italia que se encuentran en otras regiones de actividad geotérmica. Hasta la fecha, Yokogawa ha participado en 30 proyectos de generación de energía geotérmica en Japón, el Sudeste de Asia y otras regiones, proporcionando una variedad de tecnologías de medición y control que mejoran la confiabilidad y la eficiencia en el mantenimiento de sistemas de generación de energía geotérmica.

    Leer Más
  • Petroquímica y a granel

    Las empresas productoras de petroquímicos, productos inorgánicos o productos intermedios se encuentran bajo una presión constante para equilibrar los costos y los márgenes al suministrar productos a sus clientes de manera oportuna y eficiente, manteniendo al mismo tiempo operaciones seguras y conformes con la normativa. Además, las empresas químicas tienen que adaptarse a la constante fluctuación de los precios de los insumos y la energía y tener la capacidad de proveer al mercado la combinación de productos más rentable.

    Yokogawa ha estado supliendo las necesidades de automatización del mercado de productos químicos a granel globalmente y ha obtenido reconocimiento como líder en este mercado. Con productos, soluciones y especialización en la industria, Yokogawa entiende su mercado y las necesidades de producción y trabajará con usted para proporcionarle una solución confiable y rentable durante el ciclo de vida de su planta.

    Leer Más

Productos y Soluciones Relacionadas

  • Sistema de Control Distribuido (DCS)

    Yokogawa ofrece una infraestructura operacional crítica para la automatización de procesos. Nuestro sistema de control distribuido (DCS) permite la automatización y el control de los procesos industriales y un mejor desempeño empresarial. Más de 10,000 plantas confían en el DCS de Yokogawa para cumplir con sus objetivos de producción.

    Leer Más