Horizontal Ball Mill

다운로드 (166 KB)

Introduction

ISA 100 WirelessA horizontal rotary miller used to grind the limestone rocks with metallic balls as grinding stones. This is used as the raw ingredient to produce cement powder. The temperature needs to be monitored in order to control the process and the quality of the final product.

 

horizontal rotary miller

The user was using an induction temperature measurement based on a rail system that was very fragile and therefore unreliable.

Benefits

  • Minimized mill downtime due to breakage of cables, rails and signal loss
  • Reduced maintenance effort (No cable maintenance issue)
  • Improved quality of measurement
  • Increased number of measurement points with minimum cost
  • Increased operational uptime with simple and flexible installation
Old system of transmission by rails and power induction
Old system of transmission by rails and power induction.

Solution

Install two YTA510 wireless temperature transmitters at the mill wall. They then communicate directly with the wireless gateway. Modbus signals from the gateway are sent to the "MW100" that converts the measured values into 4 to 20mA signals that the existing control system can accept without any modification.

signals

Result

After installing wireless transmitters there was a 40% improvement in the efficiency of the mill operation. There were no records of communication error. The ISA100 wireless solution reduced total maintenance cost by 68% and increased the measurement reliability by a further 85%.

Conclusion

In mining and cement factories there are a lot of rotating equipment. The customer approved the wireless solution and a conceptual design that uses our wireless solution within this type of application was standardized. The initial cost of deployment was quickly paid back by the increased operational time and reduced maintenance cost and effort.

Analog Output
3 YTA510 for Mill Balls and 1 YTA510 to Route.

업종

Related Products & Solutions

YFGW710 Field Wireless Integrated Gateway

YFGW710 Field Wireless Integrated Gateway comply to the wireless communications standard ISA100.11a for industrial automation of International Society of Automation (ISA), and relays ISA100 Device data to the system via integrated backbone router. Single unit of YFGW710 has integrated functions of backbone router, system manager, security manage, and gateway.

YTA510 무선온도전송기

고성능 온도 전송기 YTA510은 써모커플(열전대), RTD, 옴 또는 DC mV 입력을 받아 들입니다. 이 전송기는 무선 신호를 사용하여 프로세스 변수 뿐만 아니라 설정 Parmaeter도 전송합니다. 전송기는 내부 배터리로 작동하며 하드 와이어 링이 필요하지 않으므로 설치 비용이 감소 될 수 있습니다. 통신은 ISA100.11a 프로토콜 스펙을 기반으로 합니다.

현장 무선기기

무선 솔루션 유연하게 적용함으로써 인프라에 대한 투자를 줄이면서 플랜트 운영에 대한 더 많은 이해할 수 있게 도와줍니다.

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

Top