YFGW410 현장 무선 관리 스테이션

YFGW410 현장 무선 관리 스테이션은 국제 자동화 협회 (ISA)의 산업 자동화를 위한 무선 통신 표준 인 ISA100.11a를 기반으로 합니다. 이 제품은 ISA100.11a에 기반한 시스템 관리자 / 보안 관리자 / 게이트웨이 기능을 가지고 있으며이를 현장 무선 수신기 (YFGW510) 및 / 또는 현장 무선 미디어 컨버터 (YFGW610)와 결합하여 현장 무선 시스템을 구성합니다.

  • 높은 신뢰성과 유연성 :

    이산 형 아키텍처를 채택하며 두 제품을 연결하여 중복 구성이 가능합니다. 필드 무선 시스템을 정지시킬 필요가 없으며 유지 보수를 온라인상에서 수행 할 수있는 매우 유연한 작업이 가능합니다.

  • 높은 보안 통신

    이 제품은 액세스 제어 목록 (IP 필터 및 포트 필터)을 지원하여 무단 액세스를 방지하고 역할 기반 암호로 보호 된 보안 사용자 인터페이스를 지원합니다. ISA100.11a의 단재단(End-to-end) 통신은 AES 128bit로 암호화됩니다. 통신 및 보안의 견고성은 Achilles Level 1 인증을 획득함에 따라 검증됩니다.

  • 멀티 프로토콜 터널링

    이 제품은 HART 및 Modbus와 같은 외부 프로토콜을 캡슐화하여 장치와 호스트 시스템간에 전송할 수 있습니다. PROFIsafe와 같은 안전 통신 프로토콜을 SIS (Safety Instrumented System)와 무선 안전 장치간에 전송함으로써 전체 안전 시스템에 필요한 안전 무결성 레벨 (SIL)을 달성하는 데 기여합니다.

  • 효과적인 무선 자원 사용

    이 제품은 신뢰성 있고 효율적인 무선 통신을 실현하기 위해 현장 무선 네트워크의 대역폭을 유연하게 활용할 수 있습니다. Duocast 기능은 이 제품에 연결된 두 개의 백본 라우터 (BBR)를 통해 동시에 데이터 수신을 가능하게 합니다. 내장 된 데이터 캐시 기능은 현장 무선 네트워크의 대역폭과 현장 무선 장치의 에너지 소비를 절약합니다.

Details

Communication Interface Standard 100Base-TX2
Transmission Speed 100Mbps
Connector RJ-45
Cable Type Category 5
Maximum Length 100m
Number of Ports 4 ports
Port Name B1、B2、B3、B4
Protection Surge
Communication Protocol Modbus
OPC1
Management configuration, etc. HTTP
IEEE1588PTP v2
Proprietary3
  1. OPC interface connection is available by Field Wireless Device OPC Server (SSS7100). For details of this product, see related products General Specifications.
  2. In outdoor wiring to Field Network or 100BASE-TX of Field Wireless Backbone, use optical fiber cables with a nonmetallict ension member, combining with YFGW610.
  3. TCP based custom protocol used for communication between this product, "Field Wireless OPC Server", "FieldMate Versatile Device Management Wizard", "Plant Resource Manager (PRM)", and YFGW510. For details of each product, see related products General Specifications.
  4. Maintenance/Diagnostic Network (100BASE-TX, RS-232C) are not available for outdoor wiring.
  5. These are the serial ports for a maintenance which only our company use.
Communication Interface Standard 100Base-TX4 RS-232C4 5
Transmission Speed 100Mbps 115.2kbps
Connector RJ-45 RJ-11
Cable Type Category5 Proprietary
Maximum 100m 15m
Number of Ports 1port 1port
Port Name M1
Protection
Communication Protocol Modbus
OPC1
Management, configuration, etc. HTTP Proprietary3
  1. OPC interface connection is available by Field Wireless Device OPC Server (SSS7100). For details of this product, see related products General Specifications.
  2. In outdoor wiring to Field Network or 100BASE-TX of Field Wireless Backbone, use optical fiber cables with a nonmetallict ension member, combining with YFGW610.
  3. TCP based custom protocol used for communication between this product, "Field Wireless OPC Server", "FieldMate Versatile Device Management Wizard", "Plant Resource Manager (PRM)", and YFGW510. For details of each product, see related products General Specifications.
  4. Maintenance/Diagnostic Network (100BASE-TX, RS-232C) are not available for outdoor wiring.
  5. These are the serial ports for a maintenance which only our company use.

 


 

Functional specifications Temperature Range Operating: --40 to +65°C(altitude: up to 2000m)
: -40 to +55°C (altitude: more than 2000m, up to 3000m)
Storage: -40 to +85°C
Humidity Range Operating: 5 to 95 %RH (non-condensation)
Storage: 5 to 95 %RH (non-condensation)
Temperature gradient Operating: ±10°C/h or less
Storage: ±20°C/h or less
Power Supply Voltage Range: 10.8~26.4 V DC
Rated Power Supply: 24 V DC
Momentary Power Failure: Instant Disconnection
DC Power Supply Ripple Ratio: 1%p-p or less
Power Consumption Max. 10 W
Degrees of Protection IP20
Vibration resistance 0.15 mm P-P (5~58 Hz), 1 G (58~150 Hz)
Shock resistance 15 G 11 ms
Noise resistance Electric field: 3 V/m or less (80MHz~1GHz)
Electrostatic discharges: 4 kV or less (contact discharge), 8 kV or less (aerial discharge)
Grounding Class-D grounding (no sharing ground with others)
Cooling Natural Air Cooling
Regulatory Compliance Statements

CE Conformity

EMC: EN61326-1 Class A, Table 2, EN55011 Class A group1, EN61000-6-2
Safety Requirements CSA C22.2 No. 61010-1 (Indoor use only)
Explosion-Proof Types ATEX Type n declaration
Communication Interface Standard 100BASE-TX2 RS-4853
Transmission Speed

100Mbps
(Auto Negotiation)

38400, 19200, 9600 bps

Connector RJ-45 Proprietary
Cable Type Category 5 AWG24~12
Maximum Length 100m 1200m
Number of Ports 3 ports 1port
Port Name F1、F2、F3
Protection Surge Isolated, Surge
Communication Protocol

For I/O data and status

Modbus/TCP
OPC 1 3
PROFINET

Modbus/RTU

For management,
configuration, etc.

HTTP
NTP/SNTP
Proprietary3

  1. OPC interface connection is available by Field Wireless Device OPC Server (SSS7100). For details of this product, see related products General Specifications.
  2. In outdoor wiring of Field Network or Field Wireless Backbone, it is recommended to use optical fiber cables with a nonmetallic tension member, combining with YFGW610.
  3. TCP based custom protocol used for communication between this product, “Field Wireless OPC Server”, “FieldMate Versatile Device Management Wizard”, “Plant Resource Manager (PRM)”, and YFGW510. For details of each product, see related products General Specifications.

자료실

Overview:

Wireless Multi-Input Temperature Transmitter YTMX580 can accept inputs from up to 8 points, and contribute to your CAPEX cost reduction.

Application Note
Overview:

Eliminating the wire using wireless transmitter is the perfect solution for rotating equipment. It establishes data collection between the transmitter and the gateway by reliable communication even though the dryer was rotating.

업종:
Overview:

One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.

업종:
Overview:

Install a YTMX580 on the side of the rotating furnace that can wirelessly transmit measured values from multiple temperature sensors.

Overview:
  • Temperature is monitored to maintain consistency of the viscous fiber entering the drum.
  • Existing system requires manual temperature readings.
  • Wired temperature measurement is not available because the tank is rotating.
Overview:

Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.

Overview:

Challenges

  • The distance is not so long, but there are many pipes and tanks ("Pipe Jungle") in the field.
  • Had to avoid the obstacles and take care multi path condition.  

Solution

Repeater is installed on high place between control room and monitor position. The extend cable is used for antenna of Gateway.

  • Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x2
Application Note
Overview:

Blending plays a key role in industries such as food, healthcare and chemicals etc. Temperature and vacuum measurements are very important in minimizing the moisture content to ensure the quality of the final product. Strictly maintaining them throughout the process ensures the final product yield.

업종:
Overview:

The client wanted to monitor the pressure of the gas well at offshore platform remotely to reduce maintenance cost and increase safety of maintenance personnel.

Overview:

ISA100 wireless temperature and pressure transmitters with orifice plates allow:

  • No cabling installations or maintenance.
  • Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
Overview:

ISA100 Wireless Monitoring  

  • Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1

Gateway is installed at control room and 3m height extended antenna is set.

Overview:

Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.

업종:
Overview:

Pressure measurement of tubeless tyres to monitor the air loss is one of the key performance tests in the tyre manufacturing units. Relocation of tyres from one testing rack to the other for various tests and frequent movement of the testing setup for conditional tests to various locations calls for cable free implementation for ease of handling.

Overview:
  • Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
  • Repeater is installed on high position.
Overview:

ISA100 wireless temperature and pressure transmitters.

Overview:
  • Oil level measurement of diesel tanks that feed fuel to their diesel generator's which are at three locations and 400 meters apart from each other.
  • Also to measure level , pressure and flow to and from their main storage yard.
Application Note
업종:
Overview:

ISA100 Wireless Temperature and Pressure Transmitters

  • Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1

High quality wireless communication confirmed

  • Packet Error Rate (PER) is 0 to 2.5%/ 5 days
Overview:
  • Manual temperature reading requires walking about 130 m and climbing up and down elevated sections of the dryer stages.
  • Multiple temperature measurement points along the various stages of the dryer require many cables to the control room.
  • Very high humidity.
업종:
Overview:
  • Wireless temperature measurement
    Gateway x1, transmitter (YTA) x1, repeater x2 (The 2 repeaters are for redundancy)
  • Extended antenna to circumvent obstacles and improve the radio path for stable measurement (communication was unstable when the height of the antenna was low).
Overview:
  • Wireless temperature measurement 
    gateway x1, transmitter (YTA) x1
    repeater x1: between gateway and YTA.
  • High quality wireless communication was confirmed.
    With repeater at center: The packet error rate was 0%.
업종:
Overview:

Geothermal power plants create electricity from geothermal energy. These power plants are similar to other steam turbine station; however their heat source is that of the earth's core. The created steam is used to turn the turbine for the production of electricity. Technologies include Dry steam, Flash steam and Binary cycle power stations with Binary cycle being the most common geothermal plant in current production. In the process of geothermal power generation the facility needs to monitor various processes, as in this case steam line pressure sits in remote from control room's location.

Application Note
Overview:

A horizontal rotary miller used to grind the limestone rocks with metallic balls as grinding stones. This is used as the raw ingredient to produce cement powder. The temperature needs to be monitored in order to control the process and the quality of the final product. The user was using an induction temperature measurement based on a rail system that was very fragile and therefore unreliable.

Overview:

The client wanted to monitor the injection gas pressure of gas lift remotely in central control room. Antitheft measures are needed to install new equipments and cables.

Overview:

Both bulk and finished inventories are stored in distributed tank farm remote from the site operations. These are difficult to instrument due to the infrastructure cost involved. These are then monitored daily by patrol rounds. While effective, this method does require a large skilled labor force to monitor all of tanks. This can impose an additional risk when the stored medium is of a hazardous nature.

Yokogawa Technical Report
Overview:

Wireless technology has a long history, and it began around the time that James C. Maxwell theoretically predicted and then proved the existence of electromagnetic waves in the 1860s, and when Heinrich R. Hertz experimentally confirmed the actual existence of the electromagnetic wave in 1888.

Yokogawa Technical Report
Overview:

In plant sites, there are various places such as those affording an unobstructed view like tank yards, and others surrounded by metal pipes and equipment obstructing the view (hereafter referred to "pipe jungles"), often seen in oil refinery and chemical on-site plants. The frequency band of radio waves used for field wireless communication is 2.4 GHz, which has high straightness and its ability to go around things can hardly be expected.

Yokogawa Technical Report
Overview:

The introduction of wireless technologies into plants is anticipated as one of the measures for implementing field digital solutions not only to reduce cable wiring costs but also to improve plant wide safety/stable operations, operating efficiency, and so on.

Yokogawa Technical Report
Overview:

The FieldMate versatile device management wizard is PC software mainly used for configuring and adjusting field devices. Under the concept of "one tool for all," Yokogawa has been enhancing this software to support a wide range of field devices and field communication protocols.

업종:
Yokogawa Technical Report
Overview:

In recent years, expectations for control systems using wireless communications have been increasing in the process control market. This is because these systems do not require power and communication wiring for field instruments, enabling reduced initial and maintenance costs, and easy installation.

Downloads

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

Top