Quality Control and Cost Reduction for Pharmaceutical and Cosmetics Plants

다운로드 (389 KB)

Introduction

Quality Control and Cost Reduction for Pharmaceutical and Cosmetics Plants

For the management of raw materials in the pharmaceutical and cosmetics industries, a manual titration method has been used to measure acid value (AV), water content, and iodine value (IV). As quality control is most important in production, this manual measurement technique presents many difficulties. Each item must be calibrated for the manual measurements, and reagents and sample pretreatment are required. In addition, their analysis is time consuming and it is difficult to maintain accuracy. Yokogawa developed the NR800 FT-NIR Analyzer to address these needs. With this system, measurements are reliable and stable, and it is much easier to control quality.

Expected Benefits

  • Ensures stable, reliable, and continuous measurement 
  • Reduces costs and time for analysis 
  • Eliminates manual measurement errors
  • Reduces operator workload for storing and printing out analyzed data

Process Overview

System Configuration Example

System Configuration Example

A system configuration example for vial cell measurement is shown above. The InfraSpec NR801EL is the at-line model of the NR800 series FT-NIR analyzer. It employs exactly the same core system hardware (interferometer and detector) as the NR800 process model.

This model transfer capability will drastically cut the model implementation time and cost at the project stage while providing for more flexible and efficient model upgrades during routine operations. Software specially developed for the at-line model, SPECTLAND 2 at-line, will make operation easier and more user friendly, improving work efficiency in at-line and laboratory measurement applications.

Measurement Procedure

Measurement Procedure

Measurement Procedure

Solution Details

Comparison Data

Manual measurement
Iodine Value (IV) Titration Required 1 hour
OHV Titration Required 2 hours
Acid Value (AV) Titration Required 20 min.
Moisture Titration Required 20 min.

 

Measurement with the NR800
4 properties at once Not required 1- 2 minutes

Advantage of the NR800

  • Substantial cost and time reductions for measuring raw material oil because of simultaneous multi-component measurement
  • Improved quality control (QC)
  • Easy measurement and storage of data
  • Easy sending data to PC

About NR800

The NR800 is a FT-NIR analyzer offering unparalleled reliability and stability for a wide range of process and laboratory applications.

Its high wavelength resolution, outstanding accuracy, and wide scanning range deliver a new level of process information, opening up new possibilities. Direct transfer of a calibration model from the laboratory to the process, or among processes, is also possible. And of course, ease of operation and user-friendly software are key design concepts of the NR800.

Features of NR800

  • Stability and reliability
  • Single detector throughout the wavelength range
  • High resolution
  • Calibration model transfer
  • Double beam configuration
  • Up to 4 multi-stream channels with no optical multiplexer

Infra Spec NR800

업종

Related Products & Solutions

InfraSpec NR800

NR800은 Yokogawa의 다양한 공정 및 실험실 응용 분야에 탁월한 신뢰성과 안정성을 제공하는 FT-NIR 분석계 입니다.  높은 파장 분해능, 뛰어난 정확도 및 넓은 스캔 범위는 새로운 가능성을 열어주고 새로운 수준의 공정 정보를 제공합니다.  실험실에서 공정으로 또는 공정 간에서 검량선을 직접 전송할 수 있습니다. 물론 NR800의 핵심 설계 이념은 조작의 편리함과 사용자 친화적인 소프트웨어 입니다.

Non-Dispersive Infrared Gas Analyzers (NDIR)

NDIR분석계는 CO2, CO, CH4, NO,SO2 를 비롯한 다양한 가스 성분을 고감도로 측정할 수 있으며, O2 측정은 내장된 상자성 분석기 또는 외부 지르코니아 분석기를 사용하여 측정할 수 있습니다.

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

Top