Name: 파라미터 설정 소프트웨어 LL50A
Brand: Yokogawa
SKU: ll50a

Instruction Manuals
General Specifications
기술 지원

UTAdvanced 시리즈의 파라미터와 래더 프로그램 등을 PC에서 작성 · 설정하기위한 소프트웨어입니다. 조절계와 통신하면서 튜닝과 래더 프로그램의 모니터링이 가능합니다.

다양한 연결 방법
파라미터 설정 기능
튜닝 기능
래더 프로그램 작성 기능
네트워크 프로파일링

파라미터 설정 기능

LL50A를 이용하여 파라미터 설정 및 프로그램 패턴 생성 뿐만 아니라 데이터 관리도 쉽게 할 수 있습니다. 또한 설정한 매개 변수를 UTAdvanced에 초기 파라미터로 지정하여 등록 가능합니다. (초기화 작업은 전면 판넬 키에서도 실시 할 수 있습니다.)

튜닝 기능

UTAdvanced의 PID 값을 최적화 할 때 사용하면 편리합니다. PID 값의 수정 뿐만 아니라 목표 설정치 (SP) 변경, 자동 / 수동 등의 모드 전환도 가능합니다. 화면에서 SP / PV / OUT 값을 모니터하면서 실행 가능하므로 간편한 튜닝 작업이 가능합니다.

래더 프로그램 작성 기능

래더 시퀀스 프로그램을 작성하고 래더 프로그램을 모니터링 할 수 있습니다.

네트워크 프로파일 생성 기능

PROFIBUS-DP 통신을 위한 장치 데이터 시트를 생성하는 데 사용할 수 있습니다.

Via Bus Powered USB Cable

Can be set parameters while no power supply to controller.

Via Ethernet Communication Connector

Via Dedicated Adapter

Via Dedicated Adapter Can be used while attached to the control panel.

Applicable Controllers: UT55A, UT52A, UT35A, UT32A
Applicable OS: Windows XP/Vista
Communication method: USB 1.1

Via RS-485 Communication Terminals

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

See More
【Support Information】New Legislative Framework (NLF) Conforming Products

This is a list of recorder and controller products that support the New Legislative Framework (NLF.)

See More

I installed LL50A on my PC but I can't open communications.

(ns-faq-ut-2072-connect)

Confirm that there is a proper USB connection. If there is no problem with the connection, check whether the USB driver is installed correctly on the PC.

What do "upload" and "download" mean with the LL50A?

(ns-faq-ut-2084-term)

Upload means to read data on the LL50A from a controller. Download means to write data from the LL50A onto the controller.

I'm creating setup data on the LL50A. I want to write the data on the controller, but should I do an upload or a download?

(ns-faq-ut-2101-setting)

To write the data from the PC to the controller, do a download.

I can't select Tuning, Register monitor, or Ladder program monitor from the LL50A monitor menu.

(ns-faq-ut-2105-setting)

Close all windows open in the lower right of the screen, such as the parameter setting window.

Does a communication cable come with the LL50A?

(ns-faq-ut-2107-spec)

The LL50A comes with a dedicated USB cable, and a dedicated adapter for attaching to the main unit front panel.

Can you tell me the model of the cable that comes with the LL50A parameter setting software?

(ns-faq-ut-2149-select)

The model is LL50A-00 (parameter setting software).

While setting data on the LL50A, the MODE parameter item doesn't appear.

(ns-faq-ut-2151-setting)

MODE (operation mode) related parameters do not appear.

Can I purchase an English version of the LL50A setting tool?

(ns-faq-ut-2161-select)

The LL50A supports Japanese and English. The installer detects the language of the OS automatically.

There are no operation keys on the /MDL DIN rail attachment model. How can I perform autotuning?

(ns-faq-ut-2188-setting)

Autotuning can be executed from the LL50A tuning monitor.

I installed the LL50A. I want to write the UT settings to a PC, but I get the following error message. "Failed to upload instrument information. Check the communication connection and conditions."

(ns-faq-ut-2190-setting)

When you install the LL50A, two icons are create on the desktop. To write settings, launch the Setting Tool by clicking its icon.

Can I switch the language of LL50A from Japanese to English?

(ns-faq-ut-2199-setting)

Yes, in version R6.02.01 and later.Use File>Settings>Language. If parameters are not displayed, install the latest version of LL50A.

Communication on the LL50 setting tool isn't working.

(ns-faq-ut-2211-setting)

Check the following. Whether the dedicated cable is securely inserted into the adapter. The position of attachment to the front of the controller. In Device Manager, under Ports (COM and LPT), confirm that "Yokogawa USB Serial Port" ap...

I want to apply protection to a ladder program created on LL50A.

(ns-faq-ut-2212-setting)

You can protect it with a unique user password.

Can I use a commercially available USB cable for LL50A?

(ns-faq-ut-2242-connect)

No, please use the included cable when you purchase LL50A.

What’s the password I need to enter in LL50A to restore factory defaults on the controller?

(ns-faq-ut-2244-setting)

The password is UTAdvanced_INIT.

What’s the password I need to enter in LL50A to restore user defaults on the controller?

(ns-faq-ut-2245-setting)

The password is UTAdvanced_INIT_SET.

When reading UT data on LL50A, the DCU version of the system data is R0.00.00. Is that normal?

(ns-faq-ut-2250-spec)

Yes. For LL50A communication that uses the maintenance port, the DCU version is R0.00.00.

I'm editing a CC-Link communication profile on the LL50A. I want to add the UT32A-D type to the RS485 communication line, but the PV2 register symbol doesn't appear.

(ns-faq-ut-2168-setting)

Select Modbus slave device UT32D.

I purchased a DIN rail mount UTAdvanced series, but how should I configure it?

(ns-faq-ut-2165-spec)

Use the LL50A Parameter Setting Software, sold separately.

I want to perform cascade control of 2 temperature inputs on a single unit. Is there a model that can do that?

(ns-faq-ut-2193-select)

Yes, the UT75A + LL50A setting software (sold separately) can handle that.

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

Generally you should create programs in "user ladder" mode. If needed, you can rewrite the input ladder and output ladder portions.

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

The DATA register uses a 4-byte floating point number, therefore it displays a lot of digits. Try using the K or P registers, since they handle 2-byte integer data.

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

On the LL50A, change the system data's ladder sequence function from USE to DON'T USE. If not using the LL50A, initialize the main unit.

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

It won't start while the system data or parameter setting screen is displayed. Close those screens and restart.

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

Check the operation of the program on the LL50A ladder program monitor.

Can I change the temperature controller profile information for CC-Link communication?

(ns-faq-ut-2068-spec)

You can change it if it is in a user profile (profile no. 0).To create a user profile, use the LL50A network profile tool.

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

Yes, if using a UTAdvanced series instrument with the RS-485 communication option. Set the RS-485 protocol on the main unit to 8 (MBRTU: Modbus RTU). The initial value is 8. Select RS-485 in the LL50A communication execution screen, and make the comm...

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

If the LL50A's display setting is not PRO, some parameters won't display. Change the LL50A's display parameter as follows: Display > Parameter > Display level > Professional. The LL50A's display level must be set separately f...

After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.

(ns-faq-ut-2026-connect)

As for individually writing parameters via CC-Link, changing OUT area values constitutes a write request. In your case, since the OUT area value hasn't changed from the previous value, the SP value is notoverwritten. As a fix, periodically copy t...

Can I convert GREEN series (UT300/UT400/UT500/UP500) parameters for use with the UTAdvanced series?

(ns-faq-ut-2060-soft)

Yes, you can use the GREEN-UTAdvanced parameter data conversion tool (available as free download). Using the LL100/LL200 parameter setting tool, save the GREEN series parameters to a file, convert them using the conversion tool, then apply the settin...

Instruction Manuals

General Specifications

Software

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

파라미터 설정 소프트웨어 LL50A

Details