Data Management Solutions for Green Energy Yokogawa provides complete solutions for green energy with a variety of measurement/control instruments PDF

다운로드 (699 KB)

Yokogawa provides complete solutions for green energy with a variety of measurement/control instruments

Providing Critical Performance Data Measurement in Green Energy for accurate measurement, recording, and monitoring of development, evaluation, and operation.

Facing serious environmental problems for the whole earth, clean energy using solar, wind, geothermal, tidal, etc... to reduce CO2 emissions is an inevitable matter. Renewable energy providers need economical/reliable/efficient solutions. Yokogawa provides a reliable data acquisition system with high accuracy for measurement and control instruments.

Solar Energy Data Recording and Remote Monitoring

Solar Energy Data Recording and Remote MonitoringOverview

MW100 records solar power parameters such as radiance, ambient temperature and before/after electric conversion power data.

Application keys

  • Solar module data (temperature, DC current/voltage) before electric conversion can be recorded via JUXTA (converter)
  • Power data after electric conversion using power meter record by communication (digital data can be more accurate). Some inverters have direct Modbus output.
  • Panel efficiency calculation from measurements in math channels

Benefits of using MW100

  • On-demand data recording/monitoring
    Data recorded simultaneously to CF and network (OPC).
  • Continuous data recording
    Even after power failure recovery failure, MW100 continues to record data.
  • Sum of power data display
    Displays the integral value for each channel
  • Operates in harsh environment (-20 to 60 C)

Before electric conversion 
(DC power measurement) 
Module data: Current, voltage, temperature

After electric conversion 
(AC power measurement) Power meter data

Environment data 
Radiance, ambient temperature

Wind Energy Data Recording and Monitoring

Wind Energy Data Recording and MonitoringOverview

Power generator parameters and weather environment data at wind-farms can be recorded. Remote access allows users to monitor all data for operational status.

Application keys

  • Strain gauge sensor at slip-ring and communications across rotating interface.
  • Environmental tolerances (vibration and operational temperatures)
  • Reliable data logging with local storage and ability to feed real-time data to SCADA package
  • Event based recording with reporting options


  • Remote monitoring via WAN
  • On site continuous data logging for extended periods
  • Recovery of data logging after power failure
  • Critical diagnostics alarm function
  • E-mail notification by an alarm on math and I/O channels helps users keep track of system for maintenance etc.

Geothermal Electrical Generation Control and Monitoring

Geothermal Electrical Generation Control and MonitoringOverview

Hot rocks and water come together in select areas to produce renewable energy. CX2000s networked to US/UP controllers provide primary control with distributed backup control for steam turbines.

Application keys

  • Fail safe operation of control valves using CX2000 as primary controller with US1000 controllers as backup
  • Distributed Control and Data Acquisition

Benefits of using CX2000 and US1000's

  • Networking capability of CX2000 to US1000 for accurate data transfer
  • Internal logic capabilities of CX2000
  • System Fault to Fail relay for transfer of control to US1000's
  • Data logging capability of CX2000 to CF card
  • Ability of US1000's to accept pass through control output and switch to local control output as backup control strategy

Hydrogen Fuel Cell Monitoring

Hydrogen Fuel Cell MonitoringOverview

Industrial hydrogen fuel cells can be used to produce hydrogen and oxygen from distilled water as well as run in reverse to generate electricity. Fuel cells can also be used in conjunction with intermittent energy sources like solar or wind to provide regulated continuous energy output.

Application keys

  • Scalable voltage and temperature measurement and monitoring (stacked cells)
  • High levels of noise rejection and channel to channel isolation
  • 100ms collection rate for channel data
  • Ability to communicate real-time data via Modbus TCP

Benefits of using MW100

  • Options for communicating with control systems
    Modbus TCP, Modbus RTU, Ethernet IP, DNP 3
  • Superior noise rejection compared to competitor models
  • High density of isolated inputs per MW100 rack
  • Event based data logging for diagnostic purposes

Energy Monitoring for Manufacturing Lines

Energy Monitoring for Manufacturing LinesOverview

MW100 and PR300 system measures and quantifies the electrical energy consumption for each assembly line

Application keys

  • Scalable from a single node to 100's of locations
  • Cost effective Individual electrical monitoring for many areas
  • Demand monitoring with alarm output for load shedding

Benefits of using MW100/PR300

  • On demand data recording/monitoring with easy access
  • Easy connection with MW100/PR300
  • Available with serial or Ethernet communications
  • Remote monitoring from any PC with internet connection

MW100 Web-Enabled Data Acquisition/Stand-Alone Data Logging System

  • Green Energy ProductsMax. 10 ms measurement interval and mixing of three different measurement intervals
  • Acquire up to 360 channels in one system
  • High-withstand-voltage: 3700 Vrms, 600 Vrms/V DC
  • Standard 10/100 Base T Ethernet with MODBUS TCP, EtherNet/IP, WITS and DNP3
  • Wide range of operation temperatures: -20 to 60°C

DX1000/DX2000 DAQSTATION DXAdvanced

  • Max. 25ms measurement interval and Max. 48 Channels
  • Custom display and multi batch function
  • Dust- and splash-proof front panel (IP65, Nema4 compliant)
  • Standard Ethernet interface. RS485/RS232 interface.
  • Networking functions: Web server, FTP data transfer, and E-mail messaging
  • MODBUS, EtherNet/IP, PROFIBUS-DP protocol support

CX1000/CX2000 Control/Measurement Station

  • Max. 6 control loops and 20 measurement channels
  • Program control function (Max. 30 program patterns)
  • Support for up to 16 external loop controllers
  • Dust and splash-proof front panel (IP65, Nema4 compliant)
  • Standard Ethernet interface. RS485/RS232 interface.
  • Networking functions: Web server, FTP data transfer, and E-mail messaging

MV1000/MV2000 Portable Paperless Recorder

  • Max. 25ms measurement interval and Max. 48 Channels (MV2000) 24 channels (MV1000)
  • Insulated between channels,1000 VAC withstand voltage.
  • The simplified interface lets you start measuring sooner
  • Standard Ethernet communication with FTP data transfer and e-mail notification
  • MODBUS TCP/RTU protocol support

PR300 Power and Energy Meter

  • Measurement functions for Wh, W, PF, Hz, V, A etc as well as transducer function
  • Three desired measurement items display
  • High accuracy measurement: Voltage, Current: 0.25 % of F.S.
  • Ethernet and RS485 communication
    Demand measurement and demand alarm output

UT52A/55A Digital Indicating Controllers

  • Universal input and Max. 50 ms control cycle
  • Ladder sequence control and fuzzy logic control
  • Active color LCD display
  • Ethernet, RS485 and PROFIBUS DP* communication
    *PROFIBUS DP coming soon

DAQSTATION and DXAdvanced are registered trademark of Yokogawa Electric Corporation.
Ethernet is a registered trademark of Xerox Corporation.
Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.

Subject to change without notice.
All Rights Reserved, Copyright© 2009, Yokogawa Electric Corporation.


Related Products & Solutions

Button Operated MV1000/MV2000

The MVAdvanced portable battery powered paperless recorders are high performance and easy to use test instruments that handle a wide range of measurements.

Data Acquisition with PID Control CX2000

CX defines the next generation in process control by fusing recording, control and networking into a single, compact product.

Mid-level UT55A/UT52A

UT55A/UT52A 온도 컨트롤러는 네비게이션 키와 함께 읽기 쉬운 14 세그먼트 대형 컬러 LCD 디스플레이를 채택하여 모니터링 및 작동 기능을 크게 향상시켰습니다. 또한, 래더 시퀀스 기능도 표준으로 탑재하고 있습니다. 컨트롤러의 깊이가 짧아 공간을 절약할 수 있으며 이더넷 통신과 같은 개방형 네트워크도 지원합니다.


PR300은 전력 설비 미터와 에너지 소비량 모니터링을 위한 미터라는 두 가지 사용자 요구를 충족하도록 설계된 패널 장착 미터입니다.

Standalone MW100

산업용 DAQ 애플리케이션의 경우 MW100은 확장성을 제공하며 SCADA 또는 DCS를 비롯한 대규모 자동화 시스템 내에서 독립 실행형 또는 노드로 통합될 수 있습니다.

디지털 레코더 DX1000/DX2000

FDA 21CFR Part 11을 준수한 확장 보안 기능 (옵션)을 탑재한 모델입니다.

Data Logger

데이터로거는 측정신호의  모니터링, 테스트, 분석을 위해 장시간 센서 데이터를 기록합니다. 
Yokogawa 데이터로거는 업계최고의 신뢰성, 노이즈 내성, 측정 정확성, 사용 용이성을 인정받아 폭넑게 활용되고 있습니다.


Power Monitors

실시간 전력 소비 모니터링은 에너지 절약의 첫 번째 단계입니다.

차트 레코더

차트 레코더는 TC, RTD, Volt 등의 아날로그 신호를 종이 차트에 기록합니다. Yokogawa 차트 레코더는 세계 최고 수준의 성능과 신뢰도를 자랑합니다.

패널 장착형 레코더

패널 장착형 디지털 레코더는 완전 일체형의 데이터 수집 · 모니터링 장치이며 안전한 데이터 저장 장치를 내장하고 있습니다. 또 네트워크 연결 기능을 제공합니다. 

패널 지시계

UM33A는 최대 9 개의 경보 출력 및 입력 보정 기능 (PV 바이어스, 다각형선 근사, 다각형선 바이어스)을 제공합니다. 또, 옵션으로 24 VDC 센서 전원을 사용할 수 있습니다.


Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.