WZ-H Cables

WZ-H Cable Signal Transmitter

WZ-H cables are compatible with all ZR22, ZR402, and AV550G model Oxygen Analyzer Systems. The purpose of these cables is to transmit the signal from the sensor/detector to the analyzer. Additionally, the cabling provides for electrical input to the heater assembly within the detector for cell temperature control.

WZ-H-6S & 6H High-Temperature Cable

Nominal Insulation Thickness FEP- 0.007 inches  0.178 mm

Nominal Jacket Thickness- 0.012 inches  0.81 mm

Nominal Outside Diameter- 0.295 inches. 8.26 mm

Number of Conductors- 7

Number of Conductor Pairs- 3 + single drain

AWG size- 16

Conductor Strand- 19/.0117

Conductor: 3 Pair Shielded CL2P CMP AWG 16/19 x 0.0117” TC FEP/ FEP

Insulation: FEP 0.007” Wall min. O.D. = 0.071” to 0.073”

Shield: Aluminum / Mylar Shield with AWG18/7 X 26 TC Drain Wire

Jacket: Gray FEP 0.012” wall Temperature Range: -80°C to 200°C (-122°F to 392°F)

Braid: None

Voltage: UL 300V Power Limited

Capacitance: 22pF/ft Nominal Weight: 67lbs. /1000ft. 

Compliances: NEC Article 725-CL2P NEC Article 800-CMP PCC FT6-C(UL) (CMP only)

WZ-H-3H High-Temperature Cable

Nominal Insulation Thickness FEP- 0.006 inches  0.152 mm

Nominal Jacket Thickness- 0.010 inches  0.254 mm

Nominal Outside Diameter- 0.188 inches  4.775 mm

Number of Conductors- 3

Number of Conductor Pairs- 1 + single drain

AWG size- 14

Conductor Strand- 19/.0147

Conductor: 2 Conductor, Shielded CL2P CMP AWG 14/19 x 0.0147” Tinned Copper FEP/FEP

Insulation: FEP 0.006” Wall min. O.D. = 0.082” to 0.084”

Shield: Aluminum / Mylar Shield with AWG16/19 Tinned Copper Drain Wire

Jacket: Gray FEP 0.010” wall, O.D. 0.188” (0.225” max)

Temperature Range: -80°C to 200°C (-122°F to 392°F)

Braid: None

Voltage: UL 150V Power Limited

Capacitance: 42pF/ft Nominal

Weight: 42lbs. /1000ft.

Compliances: NEC Article 725-CL2P NEC Article 800-CMP C(UL) (CMP only)

 

Documentos y Descargas

¿En busca de información adicional sobre Yokogawa Iberia, tecnología y soluciones?

Contáctenos

Top