YFGW610 무선 미디어 변환기

무선 미디어 변환기 YFGW610은 무선 관리 스테이션 YFGW410과 무선 수신기 YFGW510 / YFGW520 간의 신호 변환에 사용됩니다.

  • 무선 시스템을 위한 특수 설계 :
    고정밀의 시간으로 동기화 하는 ISA 100.11a 표준 아래 낮은 지연 시간과 높은 품질의 네트워크를 구성 할 수 있습니다.
  • 혹독한 환경에 대한 높은 내성 :
    광범위한 작동 온도 및 서지 보호 기능은 무선 시스템의 안전성과 높은 신뢰성을 보장합니다.
  • 설치 비용 절감 :
    플러그 앤 리플레이 기능으로 설치가 단순화 할 수 있기 때문에 자체적으로 구성 할 필요가 없습니다.

Details

Communication Interface Standard 100BASE-TX1
Transmission Speed 100Mbps
Connector RJ-45
Cable Type Category 5
Center Wavelength
Maximum Length 100m
Number of Ports 4 ports
Port Name B1, B2, B3, B4
Protection Surge
Port Connection B1-1, B2-2, B3-3, B4-4 (fixed)
  1. YFGW410과 연결할 경우
  2. YFGW510과 연결할 경우. 실외 배선의 경우 Nonmetallic tension member가 있는 광섬유 케이블을 사용하십시오.
Communication Interface Standard 100BASE-FX2
Transmission Speed 100Mbps
Connector SC connector [1pole x 2]
Cable Type Multi-Mode Fiber*3  Single mode Fiber*4
Center Wavelength 1300nm
Maximum Length 2000m(Multi-Mode) 5000m(Single Mode)
Number of Ports 4 ports
Port Name 1, 2, 3, 4
Protection
Port Connection B1-1, B2-2, B3-3, B4-4 (fixed)

2. Connect to YFGW510/YFGW520. In outdoor wiring, it is recommended to use optical fiber cables with a nonmetallic tension member.
3. Core diameter / cladding diameter 50/125 μm core or 62.5 / 125 μm can be used.
4. ITU-T G.652 compliant products can be used

Functional specifications Temperature Range Op-40 to +65°C (altitude : up to 3000m)
Storage: -40 to +85°C
Humidity Range Operating: 5 to 95 %RH (non-condensation)
Storage: 5 to 95 %RH (non-condensation)
Temperature gradient Operating: ±10°C/h or less
Storage: ±20°C/h or less
Power Supply Voltage Range : 10.8~26.4 V DC
Rated Power Supply : 24 V DC
Momentary Power Failure : Instant Disconnection
DC Power Supply Ripple Ratio : 1%p-p or less
Power Consumption Max. 10 W
Degrees of Protection IP20
Vibration resistance 0.15 mm P-P (5~58 Hz), 1 G (58~150 Hz)
Shock resistance 15 G 11 ms
Noise resistance Electric field : 3 V/m or less (80MHz~1GHz)
Electrostatic discharges: 4 kV or less (contact
discharge), 8 kV or less (aerial discharge)
Grounding Class-D grounding (no sharing ground with others)
Cooling Natural Air Cooling
Regulatory Compliance Statements CE Conformity EMC: EN61326-1 Class A, Table 2, EN55011 Class A group1, EN61000-6-2
Safety Requirements CSA C22.2 No. 61010-1 (Indoor use only)
Explosion-Proof Types ATEX Type n declaration

자료실

Yokogawa Technical Report
Overview:

Wireless technology has a long history, and it began around the time that James C. Maxwell theoretically predicted and then proved the existence of electromagnetic waves in the 1860s, and when Heinrich R. Hertz experimentally confirmed the actual existence of the electromagnetic wave in 1888.

Yokogawa Technical Report
Overview:

In plant sites, there are various places such as those affording an unobstructed view like tank yards, and others surrounded by metal pipes and equipment obstructing the view (hereafter referred to "pipe jungles"), often seen in oil refinery and chemical on-site plants. The frequency band of radio waves used for field wireless communication is 2.4 GHz, which has high straightness and its ability to go around things can hardly be expected.

Yokogawa Technical Report
Overview:

The introduction of wireless technologies into plants is anticipated as one of the measures for implementing field digital solutions not only to reduce cable wiring costs but also to improve plant wide safety/stable operations, operating efficiency, and so on.

Yokogawa Technical Report
Overview:

The FieldMate versatile device management wizard is PC software mainly used for configuring and adjusting field devices. Under the concept of "one tool for all," Yokogawa has been enhancing this software to support a wide range of field devices and field communication protocols.

업종:

Downloads

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

Top