Use the Advance function. After you start the program, hold down the SET/ENT key for a few seconds. Hold will appear on the display. Release the Set Enter and then press it again 1 time. You will see ADV (the V looks like an upside down A). Press the up arrow to change OFF to ON and press SET/ENT; that will advance your program 1 segment. You may have to do this multiple times to get to the segment you want.
Productos y Soluciones Relacionadas
-
UP150
Compact 1/16 DIN sized Program Temperature Controller offers one program pattern with 16 segments. It also features universal input, two event outputs, auto-tuning and "SUPER" overshoot suppress function as standard. Retransmission output and RS485 communication are optional features.