Korea KR   
Temperature
Realtime OS-based Machine Controllers

e-RT3 Products - Temperature (온도)

Temperature Monitoring module (온도 모니터링 모듈)

단일 슬롯을 차지하는 이 모듈은 4개의 온도 입력 채널을 모니터링 합니다. 
온도 모니터링에 필요한 입력 조건 및 기타 데이터가 모듈에 저장되므로 시스템 시작 시 파라미터 설정이 필요하지 않습니다.

Details

Features (특징)

  • 고 정확도, 고 해상도, 고속
    입력 샘플링 주기는 10ms, 100ms, 200ms 중에서 선택할 수 있습니다. 입력 변환 정확도는 풀 스케일의 ±0.1% 이며, 입력 분해능은 0.1℃ (5자리 표시 사용) 입니다. 저해상도 작동 (4자리 표시 사용)도 가능합니다. 
  • 범용 입력
    입력 유형은 열전쌍, RTD 또는 DC 전압으로 채널별로 설정할 수 있습니다. 
  • 온도 모니터링 모듈용 ToolBox
    이 모듈을 위한 전용 ToolBox 소프트웨어가 제공됩니다. 이 소프트웨어를 사용하면 화면 지침에 따라 모듈 및 모니터링의 다양한 매개변수를 쉽게 설정할 수 있습니다.

Specifications

General Specifications

Item Specification
F3CX04-0H
Number of Channels 4 channels
Isolation Between input terminals and internal circuit Isolated (photocouplers, and capacitive / inductive coupling devices)
(tested for 1500 V AC voltage withstanding for 1 minute)
Between input terminals
Alarm types 4 types of alarm:
input upper limit alarm, input lower limit alarm
(with or without waiting for each of the above 2 alarms)
Number of alarm outputs (input relays) 4 points per channel (Only alarms 1 and 2 have input relays)
Alarm delay timer Yes
Warm-up time 30 minutes min.
Max. allowable ambient temperature change rate*1 10 ℃ /h max.
Mounting position Horizontal or inverted orientation not allowed
External connection 40-pin spring terminal block*2
External dimensions*3 28.9(W)×100(H)×104.2(D)mm
Current consumption 200 mA at 5 V DC
Weight 160 g
Surrounding air temperature range Operating : 0 to 55 ℃  
Storage    : -20 to 75 ℃
Surrounding humidity range Operating : 10 to 90% RH (non-condensing)
Storage　 : 10 to 90% RH (non-condensing)
Surrounding atmosphere Must be free of corrosive gases, flammable gases or heavy dust.

*1 : The stated accuracy for the reference junction for thermocouple input deteriorates if the ambient temperature change exceeds this rate.
*2 : When wiring to this module, be sure to use the terminal block provided. The 40-pin spring terminal block (Part No.: T9113PL) for this module can be purchased separately as a spare part.
*3 : External dimensions excluding protrusions (for details, see the External Dimensions drawing).

Input Specifications

Item Specification
Input sampling period*1 10 ms, 100 ms, 200ms
Input types and ranges Universal input
Individual inputs separately configurable by software or collectively by hardware
Thermocouple input : 15 ranges
RTD input　　　　　 : 9  ranges
DC voltage input　　: 6 ranges
Burnout detection Thermocouples or RTDs are checked for burnout.
Up-scale, down-scale, or none may be selected.

Detection current

 Thermocouple 100 nA max.
RTD 100 nA max.
Input insulation resistance 1 MΩ min.
Allowable signal source resistance

Thermocouple or DC mV input

 250 Ω max.
DC voltage input 2 kΩ max.
Allowable wiring resistance RTD 10 Ω max per wire  (three wires must have the same resistance)
Measuring current RTD Approx. 250 μA
Reference junction compensation Thermocouple*2 ± 2.0 ℃ (0 to 55 ℃)
Allowable input voltage range -20 to 20 V DC
Noise reduction*3*4*5 Common mode 120 dB （50 / 60Hz）min.
Normal mode 40 dB （50 / 60Hz）min.

Effect of ambient temperature

 ± 0.01% / ℃ or ± 1μV / ℃, whichever is greater

*1 : You can select an input sampling period of 10 ms for 4 channels, 100 ms for 2 channels, 100 ms for 4 channels, or 200 ms for 4 channels.
*2 : This value assumes that all input terminals are correctly wired (that is, using ferrule, wire diameters and connections are correct).
*3 : This value assumes that the power supply frequency is correctly selected.
*4 : This module continues to operate at a input accuracy of ±0.5% max. of F.S. during the radiated electromagnetic field test.
*5 : This is the value when an input sampling period of 100ms or 200ms is selected. If 10ms is selected, 50/60 Hz noise canceling is not be enabled.

Downloads

General Specifications

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의
Top