Yokogawa는 클리너를 추가할 수 있는 여러가지 유형의 홀더를 제공하여 고객이 어플리케이션에 맞는 홀더 및 클리너를 선택함으로써 신뢰할 수 있고 유지보수가 쉬운 측정 시스템을 구축할 수 있습니다.
침적형 타입의 PH8HS, PH8HSF, DOX8HS는 공정 분석계와 함께 광범위하게 사용되며 반응 탱크 또는 측정조에 직접 담글 수 있습니다.
Flow-through 타입의 홀더 PH8HF, PH8HFF, FH350G는 생산라인 또는 폐수 파이프라인의 용매를 측정하기 위해 파이프라인을 따라 설치할 수 있습니다.
서스펜션 홀더 HH350G에는 가이드 파이프가 장착되어 있어 장착된 전극만 체인으로 분리하여 들어올릴 수 있으므로 유지보수가 용이합니다.
경사 플로트 홀더인 PB350G에는 변동하는 수면 수준에 따라 위아래로 움직이는 플로트가 장착되어 있습니다. 프로트는 극도의 돌출이나 감압이 없는 전극에 맞게 설계되었기 때문에 플로트 또는 전국 주변에 축적되는 이물질의 양이 감소하고 오물이 쌓이기 어려우므로 장기간에 걸쳐 안정되고 연속적인 측정이 가능합니다.
수직 플로트 홀더의 PB360G는 플로트 홀더의 설치 공간이 제한되거나 측정조가 포함되는 경우 제공합니다.
Details
Submersion Type Holders: PH8HS, PH8HSF and DOX8HS
- Stainless steel 또는 polypropylene 적용 가능
- Jet 또는 초음파 Cleaning 장치(옵션)(DOX8HS는 사용할 수 없음).
- PH8HS를 위한 선택적 플랜지 피팅.
- 기포의 영향을 방지하기 위해 DOX8HS를 위한 기울어진 장착.
Flow-Through Type Holders: PH8HF, PH8HFF and FH350G
- Stainless steel 또는 polypropylene 적용 가능
- Jet 또는 초음파 Cleaning 장치(옵션)(DOX8HS는 사용할 수 없음).
- 파이프라인에 직접 장착 가능
Suspension Holder: HH350G
- 전극을 개별적으로 끌어올릴 수 있습니다.
- 쉬운 유지보수
- Jet cleaning 장치 (Option)
Float Ball Holders: PB350G and PB360G
- 유체 수준의 변동에 영향을 받지 않고 지속적으로 안정적으로 측정할 수 있습니다.
- 유지보수 빈도를 줄입니다.
- 유지 관리가 간편합니다.
- 설치 공간이 제한된 경우에도 세로형 타입을 사용할 수 있습니다.
Sensor Holders
1. Guide-Pipe PH8HG
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP General ORP Sensor OR8ERG, OR8EFG Dissolved Oxygen Sensor DO30G MLSS Sensor SS300G |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal | ||||
| Material |
|
||||
| Measuring temperature | 0 to 50℃ (PVC), 0 to 80℃ (Polypropylene) | ||||
| Weight |
|
2-A. Submersion Type Holder PH8HS
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG Special pH Sensor HA405, DPA405, HF405 General ORP Sensor OR8ERG, OR8EFG Special ORP Sensor HA485, DPA485 |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal with 1 or 2 set of mounting hardware | ||||
| Cleaning method | Jet cleaning, brush cleaning or ultrasonic cleaning | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring temperature |
|
||||
| Measuring flow speed | 2m/s or less | ||||
| Measuring pressure | Submersion depth Max. 3m |
2-B. Submersion Type Holder (Explosionproof Type) PH8HSF
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG General ORP Sensor OR8ERG, OR8EFG |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal with 1 or 2 set of mounting hardware | ||||
| Cleaning method | Ultrasonic cleaning | ||||
| Material |
|
||||
| Construction | JIS flameproof type (for d2G4 gas) | ||||
| Weight |
|
||||
| Measuring temperature | -5 to 80℃ | ||||
| Measuring flow speed | 2m/s or less | ||||
| Measuring pressure | Submersion depth Max. 3m |
2-C. Submersion Type Holder DOX8HS
| Applicable sensors | Dissolved Oxygen Sensor DO30G MLSS Sensor SS300G |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal, with 1 or 2 set of mounting hardware | ||||
| Cleaning method | Water or air jet cleaning | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring temperature | 0 to 80℃ | ||||
| Measuring flow speed | 2 m/s or less. |
3-A. Flow-Through Type Holder PH8HF
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG Special pH Sensor HA405, DPA405, HF405 General ORP Sensor OR8ERG, OR8EFG Special ORP Sensor HA485, DPA485 |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal, with 1 set of mounting hard hardware | ||||
| Cleaning method | Jet cleaning, brush cleaning or ultrasonic cleaning | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring Temperature |
|
||||
| Measuring flow rate | 3 to 11 l/min. | ||||
| Measuring pressure | Atmospheric pressure to 500kPa. |
3-B. Flow-Through Type Holder (Explosionproof Type) PH8HFF
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG General ORP Sensor OR8ERG, OR8EFG |
||||
| Mounting | 2-inch pipe mounting vertical or horizontal, with 1 set of mounting hardware | ||||
| Cleaning method | Ultrasonic cleaning | ||||
| Material |
|
||||
| Construction | JIS flameproof type (for d2G4 gas) Cable entrance port of terminal box; G 3/4 |
||||
| Weight |
|
||||
| Measuring temperature | -5 to 80℃ | ||||
| Measuring flow rate | 3 to 11 l/min | ||||
| Measuring pressure | Atmospheric pressure to 500kPa |
3-C. Flow-Through Type Holder FH350G
| Applicable sensor | MLSS Sensor SS300G | ||||
| Mounting | 2-inch pipe mounting vertical or horizontal | ||||
| Cleaning method | Water or air jet cleaning | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring temperature | 0 to 80℃ | ||||
| Measuring flow rate | 6 to 11 l/min |
4. Suspension Holder HH350G
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG General ORP Sensor OR8ERG, OR8EFG Dissolved Oxygen Sensor DO30G MLSS Sensor SS300G |
||||
| Mounting | 2-inch pipe mounting vertical. | ||||
| Cleaning method | Water or air jet cleaning | ||||
| Material |
|
||||
| Weight | 6.4 to 13.8 kg | ||||
| Measuring temperature | 0 to 80℃ | ||||
| Measuring flow speed | 1 m/s or less |
5. Angled Floating Ball Holder PB350G
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG General ORP Sensor OR8ERG, OR8EFG Dissolved Oxygen Sensor DO30G MLSS Sensor SS300G |
||||
| Pipe length | 2.5m | ||||
| Mounting | 2-inch pipe horizontal mounting or horizontal plane mounting | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring temperature | 0 to 50℃ | ||||
| Measuring flow speed | 20 to 100 cm/s |
6. Vertical Floating Ball Holder PB360G
| Applicable sensors | General pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG General ORP Sensor OR8ERG, OR8EFG Dissolved Oxygen Sensor DO30G MLSS Sensor SS300G |
||||
| Mounting | 2-inch pipe vertical mounting | ||||
| Material |
|
||||
| Weight |
|
||||
| Measuring temperature | 0 to 50℃ | ||||
| Measuring flow speed | 20 to 100 cm/s |
자료실
Overview:
Optimizing four key factors will decrease pH sensor costs and optimize process control and overall plant efficiency.
Downloads
Instruction Manuals
- PH8HG Drop-in Sensor Guide Holder (508 KB)
- PH8HH pH Holder for High Purity Water (617 KB)
- PH8HF, PH8HFF Flow-Through Type Holder (1.3 MB)
- PB350G Angled Floating Ball Holder (750 KB)
- FH350G Flow Type Holder (200 KB)
- PH8HS, PH8HSF Submersion Type Holders (1.5 MB)
- PB360G Vertical Floating Ball Holder (1.7 MB)
- DOX8HS Submersion Type Holder (967 KB)
- HH350G Suspension Type Holder (423 KB)
- PUS400G Ultrasonic Oscillator (1.3 MB)
- PH8USF ULTRASONIC OSCILLATOR (Explosionproof Type) and PH8AL ALARM BOX (889 KB)
General Specifications
- Sensor Holders (3.2 MB)
Drawings
- pH Holder for High Purity Water PH8HH (34 KB)
- PUS400G Ultrasonic Oscillator (48 KB)
- PH8ECP KCl Filling Type pH Sensor for Electrolysis Plant (288 KB)
- PH8AX Accessories (199 KB)
- PH8ECP KCl Filling Type pH Sensor for Electrolysis Plant (for maintenance) (233 KB)
- Submersion Type Holder (with flameproof ultrasoic cleaner) PH8HSF-S3 (298 KB)
- Submersion Type Holder (with flameproof ultrasonic cleaner) PH8HSF-PP (299 KB)
- Submersion Type Holder PH8HS-PP-##-T (410 KB)
- Submersion Type Holder PH8HS-S3-##-T-## (346 KB)
- Movable Sealing Flange Mounting Type Submersion Holder (Material: PP) PH8HS-PP-##-R-## (297 KB)
- Movable Sealing Flange Mounting Type Submersion Holder (Material: SUS) PH8HS-S3-##-R-## (290 KB)
- Flow-Through Type Holder (Ex-proof Type) (Screw connection) PH8HFF-##-#PT-T-##-JS (197 KB)
- Flow-Through Type Holder (Flange connection, Ultrasonic cleaning) PH8HF-##-#1#-T-##-C# (270 KB)
- Flow-Through Type Holder (Flange connection, Jet or Brush Cleaning) PH8HF-##-#1#-T-##-#P (231 KB)
- Flow-Through Type Holder (Screw connection, Ultrasonic cleaning) PH8HF-##-#PT-T-##-C# (231 KB)
- Flow-Through Type Holder (Screw connection, Jet or Brush Cleaning) PH8HF-##-#PT-T-##-#P (193 KB)
- Flow-through Type Holder (Flange connection, No cleaning) PH8HF-PP-#1#-T-NN-NN,PH8HF-S3-#1#-T-NN-NN (227 KB)
- Vertical Type Float Holder (Material: SUS304) PB360G-S3 (311 KB)
- Flow-Through Type Holder (Ex-proof Type) (Flange connection) PH8HFF-##-#1#-T-##-JS (236 KB)
- Flow-Through Type Holder (Screw connection, No cleaning) PH8HF-PP-#PT-T-NN-NN,PH8HF-S3-#PT-T-NN-NN (191 KB)
- Flow-through Type Holder (Material: Titanium) PH8HF-TN-#1#-T-NN-NN (230 KB)
- Flow-through Type Holder (Material: Heat-resistant PVC) PH8HF-PV-#1#-T-NN-NN (161 KB)
- PH10HLD Immersion Holder (42 KB)
- PH8HG Guide Pipe (with Mounting Bracket) (229 KB)
- Submersion Type Holder DOX8HS-S3 (459 KB)
- Submersion Type Holder DOX8HS-PP (436 KB)
- Vertical Type Float Holder (Material: PVC) PB360G-PV (315 KB)
- Solenoid Valve for Jet/Brush Cleaning PH8MV (140 KB)
- Float Type Holder PB350G (307 KB)
- Flameproof type Solenoid Valve for Jet/Brush Cleaning PH8MVF (141 KB)
- Suspension Type Holder (Without cleaning) HH350G-NN-##-NN-## (59 KB)
- Suspension Type Holder (With jet cleaning) HH350G-NN-##-JT-## (42 KB)
기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?
견적 및 기술문의