EJX118B Wireless Differential Pressure Transmitter with Remote Diaphragm Seals

Wireless diaphragm seals are used to prevent process medium from entering directly into the pressure-sensing assembly of the differential pressure and pressure transmitters, they are connected to the transmitter using capillaries filled with fill fluid.

EJX118B Wireless Diaphragm Sealed Differential Pressure and EJX438B Wireless Diaphragm Sealed Gauge Pressure Transmitters can be used to measure liquid, gas, or steam flow, as well as liquid level, density and pressure.

EJX118B and EJX438B transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication protocol is compliant with ISA100.11a protocol specifications.

  • Long Life Battery Design
    Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.
  • Security Assured Wireless Network Joining
    Infrared communication between the devices for wireless network configuration and parameter setting.
  • Quick Update Time
    Selectable from 0.5 second to 60 minutes for measured process value to publish wirelessly.
Overview:
  • Temperature monitoring at a tank farm
  • Temperature and pressure monitoring in tank jungles, three vertical monitoring points.
Industrias:
Overview:

ISA100 wireless pressure transmitters

Overview:

ISA100 wireless temperature and pressure transmitters.

Overview:
  • Daily manual reading of pressure and temperature gauges with report by phone.
  • The customer wants to change measurement from off-line to on-line.
  • Cabling for wired transmitters in huge plants (up to 300 meters long) is expensive.
Overview:
  • Wireless pressure and temperature monitoring.
  • Repeater was set under the gateway.
  • The maximum distance between the repeater and transmitters is approximately 500m.
Overview:

ISA100 wireless temperature and pressure transmitters with orifice plates allow:

  • No cabling installations or maintenance.
  • Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
Overview:

ISA100 Wireless Monitoring  

  • Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1

Gateway is installed at control room and 3m height extended antenna is set.

Overview:
  • Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
  • Repeater is installed on high position.
Overview:

ISA100 Field Wireless transmitters

Overview:
  • Oil level measurement of diesel tanks that feed fuel to their diesel generator's which are at three locations and 400 meters apart from each other.
  • Also to measure level , pressure and flow to and from their main storage yard.
Industrias:
Overview:

ISA100 Wireless Temperature and Pressure Transmitters

  • Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1

High quality wireless communication confirmed

  • Packet Error Rate (PER) is 0 to 2.5%/ 5 days
Overview:

El hidrógeno es el elemento atómico más simple y más pequeño. El agua, ácidos, bases, y la inmensa familia de compuestos orgánicos contienen hidrógeno. A pesar de que el hidrógeno no es corrosivo, puede causar problemas para los transmisores de presión a través de su permeabilidad.

Industrias:
Overview:

The use of wireless technology in industrial automation systems offers a number of potential benefits, from the obvious cost reduction brought about by the elimination of wiring to the availability of better plant information, improved productivity and better asset management. However, its practical implementation faces a number of challenges: not least the present lack of a universally agreed standard. This article looks at some of these challenges and presents the approach being taken by Yokogawa.

Overview:

A distinguished panel comprising of CEOs, CIOs, CTOs and analysts, including CIO Review editorial board, has selected Yokogawa as one of the top companies that are at the forefront of tackling challenges in the wireless markets in the U.S.

Overview:

Yokogawa diaphragm seal systems are available with an optional Flushing Ring.  A flushing ring is metal donut-shaped ring installed between the seal and the customer process connection. It is a wetted part. The ring has a port(s) that can be used to flush the surface of the diaphragm during cleaning. The ports are threaded and available in either ¼-inch or ½-inch sizes. The ports are available with extensions to make them easier to reach. The ring may also have ring holders to ensure the entire assembly aligns correctly to prevent leaks.

The ring can be referred to as a Calibration Ring. The flushing ports on the side of the ring allow the user to apply a calibration pressure and consequently calibrate the unit against that pressure. Calibration is accomplished by sandwiching the calibration ring between the remote seal and a blank process flange.

The ring can also serve as a reducer, a spacer, or a heat sink.

The ring is available as part of the diaphragm seal model code or as a separate line item.

Flushing Ring (R01)

Overview:

Download this eBook and learn:

  • The basic physics of pressure
  • Different types of pressure sensors
  • Features of pressure transmitters
  • Pressure transmitters communications standards
  • Key characteristics of pressure
  • Common types of diaphragm seals
Overview:

In recent years, more field wireless devices have been used in hazardous areas. Meanwhile, in plants that are usually recognized as hazardous areas, there are numerous metallic tanks and pipes that easily shield or reflect radio waves, as discussed later, thus resulting in a poor environment for wireless communication.

Yokogawa Technical Report
Overview:

The innovation of wireless technology increases the use of wireless communication in the industry. The introduction of wireless communication to plants, however, requires strict features such as robustness, real-time responsiveness, and low power consumption. This has restricted the use of wireless communication to limited applications such as data logging and device status monitoring that does not require strict real-time responsiveness and data arrival reliability in communication.

¿En busca de información adicional sobre Yokogawa Iberia, tecnología y soluciones?


Contáctenos
Top