I want to perform autotuning via communication on a UT with CC-Link communication. Should I turn AT_L1 which is assigned to the OUT area in the profile to ON (=write 1)?

Autotuning is performed when you turn AT_L1 in the OUT area to ON (= set to 1). Please make sure that AT_L1 in the OUT area turns OFF (= set to 0) after autotuning is finished.

Related Products & Solutions

  • UM33A

    Digital Indicator with 9 alarms outputs and input correction function

  • UP35A/UP32A

    Program Controllers with 4 patterns, 40 segments, and ladder sequence functions

  • UP55A

    Program controller with 30 patterns, simultaneous monitoring, and ladder sequence function


Top