Pressure - Can the housing on a Yokogawa presssure transmitter be rotated?

Rotating the Housing (Transmitter Section)

The transmitter section of the EJA-E or EJX-A series pressure transmitters can be rotated approximately 360° and fixed at any angle within this range. (The direction of the rotation is dependant on the configuration of the instrument.) Note that there is a stopper preventing the transmitter section from being rotated more than 360°.

Procedure

1. Remove the two setscrews that fasten the transmitter section and capsule assembly, using the Allen wrench.
2. Rotate the transmitter section slowly and stop it at the designated position.
3. Tighten the two setscrews to a torque of 1.5 N·m.

 

For Technical Assistance, please contact the Technical Support Group by email at support@us.yokogawa.com or call 1-800-524-7378.