North & Central America US   
Which Input Module do I order for my FLXA21/202 analyzer?

Which Input Module do I order for my FLXA21/202 analyzer?

In April 2017 new regulations went into effect in Europe, the New Legislative Framework Standards (NLF). Because of these regulations some of the Input Modules were changed. To replace an input module on a FLXA21 or FLXA202 analyzer you need to follow the steps below.

  1. Look at the full model number of the FLXA analyzer and find the “TYPE” code. This is a 2 letter code. See the example model numbers below:


FLXA202-D-C-D-XX-…..         or         FLXA21-D-P-D-XX-…..
 

  1. Look at the table below and locate the Type code in the top row. Find your sensor in the left hand column (pH/ORP, SC, ISC, DO) and find the module part number where these two intersect.

 

Related Products & Solutions

  • 2-Wire SENCOM™ SMART Sensor Platform

    SENCOM™ 4.0 Platform technology allows pH/ORP and resistivity/conductivity to transmit and receive data when connected to FLXA202 transmitter or to any PC/tablet with Mobile Field Device Management (FieldMate) installed.

    See More

  • Conductivity Analyzers

    • Conductivity analyzers, meters, transmitters
    • Continuous process measurement and monitoring
    • Conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown, TDS
    See More

  • Dissolved Oxygen Analyzers

    • Dissolved Oxygen (DO) meters, analyzers and transmitters
    • Continuous process measurement and monitoring
    • Milligrams per liter (mg/l),parts per million (ppm), parts per billion (ppb), or % saturation. 
    See More

  • pH and ORP Analyzers

    pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.

    See More
Top