Yokogawa releases DL950 ScopeCorder

Extended and improved data acquisition speed, channel count, and transient event capture allows handling of larger amounts of data at a faster sample rate and with longer recording times.

Houston, Texas – February 18, 2021

Yokogawa Test & Measurement Corporation has released the DL950 ScopeCorder to improve efficiency and effectiveness in design and evaluation of renewable and energy efficient technologies. The DL950 ScopeCorder is a unique combination of a multi-channel, mixed-signal oscilloscope and portable data acquisition recorder. It captures both high-speed transient events and long-term trends. Building on the capabilities of the well-established DL850E, the new DL950 ScopeCorder can handle larger amounts of data at a faster sample rate and with a longer recording time. The DL950 is capable of simultaneous measurement of a wide variety of mechanical parameters.

Increasing complexities in electronic systems have resulted in the need to measure a wide range of input signals at fast sampling speeds over lengthy periods. Engineers must often resort to using multiple test instruments to measure several signals under different conditions. That adds complexities with data synchronization, management of multiple data formats and storage locations, and the inability to view all signals in one instrument. Design and test engineers deal with a broad variety of signals such as voltage, current, temperature, vibration, acceleration, strain, and other electro-mechanical and physical phenomena. 

The DL950 offers over 20 types of isolated input modules. This provides engineers the freedom and flexibility to mix and match input types as required by the application. The DL950 is equipped with eight modular slots, for up to 128 channels of measurement data, allowing engineers the ability to synchronize measurements of different types with one common instrument. Up to five DL950 units can be connected for the analysis of correlations among data.

Via the IEEE1588 high-precision time synchronization protocol for devices connected to a network, the DL950 achieves accurate synchronized measurement in conjunction with other instruments. 

According to Tom Quinlan, Vice President for Yokogawa Corporation of America, “The mechatronics industry has a growing need for the measurement not only of electrical signals but also of noise, vibration, and harshness (NVH), while the number of measuring points is on an upward trend. Manufacturers of industrial equipment will find the DL950 invaluable in testing high-efficiency motors, robots, and sensors.”

For Further Information on the DL950 ScopeCorder

Please visit the DL950 ScopeCorder page. 

About Yokogawa

Founded in 1915, Yokogawa engages in broad-ranging activities in the areas of measurement, control, and information. The industrial automation business provides vital products, services, and solutions to a diverse range of process industries including oil, chemicals, natural gas, power, iron and steel, and pulp and paper. With the life innovation business, the company aims to radically improve productivity across the pharmaceutical and food industry value chains.

The test & measurement, aviation, and other businesses continue to provide essential instruments and equipment with industry-leading precision and reliability. Yokogawa co-innovates with its customers through a global network of 114 companies spanning 62 countries, generating US$3.7 billion in sales in FY2019.

For more information, please visit www.yokogawa.com

 

The names of corporations, organizations, products, services and logos herein are either registered trademarks or trademarks of Yokogawa Test & Measurement Corporation or their respective holders.


Top