온도와 액체 접지 내장 SC25F 디지털 SMART SENCOM™ pH 12 mm 센서

• Solid Titanium LE electrode for stable measurements
• Integral Pt1000 element for enhanced pH accuracy
• Versatile in-line, immersion or off-line installation
• CIP and Steam cleaning possible
• large internal KCL volume giving the sensor a longer life time
• low conductivity applications possible from 10µS
• SC25F-ALP25 for chemically harsh applications and high temperature
• SC25F-AGP25 for all General Purpose applications
• Easy setup by sensor specific characteristics stored in the sensor itself
• Simple maintenance by comprehensive design
• CE, ATEX, CSA and FM Approval. However *Can only be used General Purpose at this time, because FLXA21 SENCOM™ module and SPS24 Interface box are pending ICECx, ATEX, FM and CSA approval*

WU11 Connection Cable

The WU11 interconnection cable is specified for reliable transfer of digital signals between the SENCOM™ sensors and Yokogawa FLXA™ analyzer. It is espically designed to be installed in a heavy industrial environment. The cable is water proof, IP67, allowing it to be submerged as a whole. The cable has a wide temperature operation range which is sufficient for most of the applications. The materials used for the cable are flame retardant to resist the spread of fire.

• Double shielding to protect connected devices for interference from high voltages and currents
• Available in four different lengths. Long cable runs up to 100 m (328 ft) are possible
• Easy connection to a SENCOM pH Sensor by one 5- pins molded connector, and to the analyzer by 5 wired pins
• Flame retardant recognized by UL (fileno. E124763) and CSA (fileno. LL105324)
• IP67
• Operating temperature from - 40ºC up to + 85°C (-40ºF up to +185°F)