Touch Screen GP10/GP20

AI(인공지능)와 확장성을 갖춘 페이퍼리스 레코더

산업 공정, 테스트 실험실과 같은 환경에서는 제품 개발, 제품 테스트 및 제조 설계, 검증, 서비스 단계에서 엄격하고 지속적인 모니터링을 필요로 합니다. GP 시리즈는 휴대용과 벤치탑 사용을 가능하게 하는 손잡이와 발판이 있는 Yokogawa의 최신 레코더입니다.

GP 시리즈는 업계 최초의 멀티포인트 터치 패널을 탑재, 직관적이고 스마트한 사용자 제어 기능을 갖추었습니다. 사용자는 방진 및 방수 디스플레이에 과거 데이터를 스크롤, 팬으로 이동, 확대/축소할 수 있으며, 메시지까지 작성할 수 있습니다. 업계 최고의 신뢰성과 측정 정확도를 제공합니다. GP 시리즈는 장기간의 물리적 또는 전기적 트랜드를 모니터링하거나 문제를 확인하는 것에 최적화되어 있습니다.

> PROFINET communication supported  NEW!

보다 쉽게, 보다 편리하게

업계 최초! AI(인공지능) 탑재 설비/품질의 쉬운 예방 검출

  • 설비/품질 예방 검출:
    과거 기록된 데이터에서 예측 탐지 모형을 쉽게 생성하여 제조 장비 및 제품의 이상 예측을 조기에 탐지할 수 있습니다.

Industry's first! AI Equipment / Quality Easy Predictive Detection

 

열처리 응용을 위한 항공우주 산업의 AMS2750/NADCAP 및 자동차 산업의 CQI-9 지원(옵션)

캘리브레이션 등을 주기적으로 실행하기 위한 일정관리 자동차 업계 주요 기업에서 채택한 열처리 기준 CQI-9 준수.
> Heat treatment special site 

 

FDA 21 CFR Part 11 지원, EU-GMP Annex 11, 데이터 무결성

FDA 21 CFR PART 11

고급 보안 기능을 통해 안전하게 사용할 수 있습니다. 고급 보안 기능 옵션(/AS)의 확장으로 미국 FDA 21 CFR Part 11, EU-GMP Annex 11, ALCOA +에 따른 데이터 무결성을 준수할 수 있습니다.
> What is "ALCOA +"?

 

Download technical data:

아날로그 측정과 관련하여, 자주 묻는 질문이 정리되어져 있습니다. [Basic], [Applied], [Noise Countermeasures] > Download


About OpreX

OpreX는 Yokogawa의 산업 자동화(IA) 및 제어 비즈니스를 포괄하는 브랜드로관련 기술과 솔루션의 우수성을 의미합니다. 카테고리와 각 카테고리 아래의 패밀리로 구성됩니다. 이 제품은 OpreX Measurement 카테고리에 속하는 OpreX Data Acquisition에 속합니다.

Details

AI를 활용한 예방 모니터링
설비/품질 에 관한 쉬운 예방 검출

* 예측 탐지 모델 및 프로파일 파형을 생성하려면 설비/품질 예측 검출 Tool(별도 판매)이 필요합니다.

Health Monitor 기능을 통해 프로세스 및 장비의 품질을 쉽게 확인 가능

과거 기록된 OK/NG(Not Good) 데이터에서 예측 검출 모델을 쉽게 만들어 GX/GP에 로드하면 제조 설비의 이상 예측 및 제품 품질 저하를 조기에 검출할 수 있으며, 정상 및 비정상 데이터의 정도를 보여주는 건강 점수는 여러 데이터 간의 상관 관계를 고려하여 판단하기 때문에 사람이 감지하기 어려운 이상 예측을 포착할 수 있습니다.

  • 최대 채널 수 : 20
  • 최속 레코더 인터벌 : 100 ms
  • 타겟 채널 : I/O 채널, 연산 채널, 통신 채널
  • 예방 검출 모델로 사용 가능한 파일:
    [Yokogawa 제품] SMARTDAC+, DXAdvanced
    [타사 제품] KEYENCE : TR-W1000, TR-W500 csv file, CHINO : KR2000, KR3000 csv file, EUROTHERM : 6100A, 6180A csv file

Easily determine the quality of processes and equipment with the Health Monitor function

Health monitor 기능이 주는 장점:

  • 설비 오작동 및 제품 품질 저하 전에 유지 및 보수 수행
  • 설비 열화 및 품질 저하 정도 정량화
  • 현장에서 설비/품질 예측 탐지 시스템을 쉽게 구축

 

프로파일 기능은 비정상적인 현상에 대한 실시간 경고를 제공합니다.

이 파형은 과거 기록된 데이터에서 프로파일 파형을 생성하여 GX/GP에 로드함으로써 공정 값의 임계값으로 사용할 수 있습니다. 프로파일 파형은 시간이 지남에 따라 공정 값이 변경되는 응용 분야에서도 유용합니다. 또한 기준 파형과의 편차를 화면에서 확인할 수 있습니다.

  • 최대 채널 수: 20
  • 최속 레코딩 인터벌: 500 ms  */MC 옵션 필수

Profile function delivers real-time warnings of abnormalities

프로파일 기능이 주는 장점:

  • 초기 상승을 포함한 전체 프로세스에 대한 알람 모니터링 및 설정
  • 현재 프로세스 값과 이상적인 파형 비교

검증된 효과 및 예측 탐지의 활용 사례는 application notes를 참조하십시오.


60일 무료 채험판!*  설비/품질 예방 검출

예측 탐지 모델 및 프로파일 파형을 생성하여 Cloud 또는 Offline Equipment/Quality Predictive Detection Tool(별도 지급)이 필요하며, 클라우드 버전을 사용하기 위해서는 아래 사이트에서 신청하여 계정을 생성해야 합니다.
*무료 체험 기간 동안 일부 기능의 제한이 있습니다.

  • Cloud 버전 : SMARTDAC + 메인 유닛에 예측 검출 모델은 로드할 수 없습니다. SMARTDAC + 메인 유닛에 프로파일 파형을 로드할 수 있습니다.
  • Offline 버전 : Sign 검출 모델 프로파일 파형은 SMARTDAC + 메인 장치에 로드할 수 없습니다.

> Click here to apply for the cloud version
> Click here to download the offline version

 *Search "OE10" on the member's site.

Note: Cloud 버전은 다음의 국가에만 판매됩니다. > US, Canada, EU, UK.


AI를 활용한 미래 예측 데이터 도출

AI는 GX/GP에 표준으로 제공됩니다. 복잡한 설정 없이 채널을 등록하면 해당 채널에서 미래의 측정 데이터를 그릴 준비가 됩니다.

미래 펜 (Future Pen)

획득된 데이터를 사용하여 미래 데이터를 예측하고, 예측된 미래 파형을 트랜드 모니터에 실시간 데이터와 함께 표시합니다. 예측된 미래 파형은 가능한 한 빨리 문제를 인식하고 처리하는 데 도움이 됩니다.

  • 최대 채널 수 : 10
  • 최속 레코딩 인터벌: 1 초
  • 예측 범위: 레코딩 인터벌 x 60 포인트

Future Pen

미래 알람 (Future alarms)

미래 펜이 예측한 미래 데이터를 기반으로 미래 알람을 설정할 수 있으며, 미래 알람 요약 화면에서 미래 알람 정보를 확인할 수 있습니다. 또한 미래 알람이 발생했을 때 외부(디지털) 출력 또는 이메일로 알림을 보낼 수 있습니다. 미래 알람 정보에는 예측된 알람 시간도 포함되어 있기 때문에 긴급한 사항도 파악할 수 있습니다.

Future alarms

* 비교적 느리게 변동하는 데이터에 효과적입니다. 빠르게 변동하는 데이터에는 적합하지 않습니다.
* 미래 펜 기능에는 일정한 제한이 적용됩니다. 자세한 내용은 일반 사양을 참조하십시오.

 

예방 검출을 위한 미래 펜(Future Pen) 데모

  • 미래펜이란 무엇인가?
  • 미래 알람은 무엇인가?
  • 미래 기능을 활용한 예제
  • AI 분석
    (약 3 분30초)

Future Pen Demonstration for Predictive Detection

Please refer to this video. (open in new window) 

 

쉽게 사용할 수 있게 설계된 직관적 UI
키 데이터 효율적 검색

과거 데이터를 손쉽게 검색

끊김없는 과거 트랜드 디스플레이—측정 중에도 디스플레이 화면을 드래그 하여 데이터를 스크롤하여 과거 데이터를 확인할 수 있습니다.

Easily review historical data

달력과 요약 스크린을 이용한 빠른 데이터 검색

캘린더에서 특정 날짜의 파형으로 점프하고, 알람 요약에서 알람 중 활성 파형으로 점프합니다.

Quickly find data using calendars and summary screens

 

문제 지점의 간단 체크

손글씨 메시지 기입

손으로 쓴 메시지로 체크가 필요한 영역에 즉시 내용 입력이 가능합니다. 스타일러스 또는 손가락 끝을 사용하여 파형 영역에 그림을 그리거나 손으로 쓸 수 있습니다.

Write freehand messages

이미지 파일 저장 및 출력

관심 있는 추세 파형 또는 알람 중에 표시되는 화면을 이미지(PNG) 파일로 저장하고 동시에 출력합니다.

Save and output image files

 

문제 파형에 대한 상세 체크

디지털 값 표시

스케일을 이동하여 해당 위치에 해당하는 값을 숫자 값으로 표시하고, 측정된 최대값/최소값을 즉시 확인합니다.

Display digital values at any location
[특허 기술]

장기간의 트랜드를 한눈에

전체 트랜드 디스플레이
장시간의 트랜드가 한눈에 확인

All historical trends display
전체 트랜드 디스플레이

 

줌 인/아웃 – 시간 축, 단위

시간 축과 레벨 축은 터치 스크린의 핀치 기능을 통해 늘리거나 줄일 수 있습니다.

Zoom in/out - time axis and engineering units
Pinch apart / Pinch together

 

Variety of display screens

Variety of display screens

 

물리량을 로그 스케일로 표시하고 저장할 수 있습니다.

로그 스케일 디스플레이 (/LG 옵션)

Log scale display (/LG option)

멀티 패널 디스플레이

9개의 레이아웃 중, 20개의 구성 화면을 저장할 수 있습니다. (멀티 패널은 GX20, GP20 만 지원)

Multi-panel display

내장된 제와 화면과 디스플레이

다양한 사전 구성된 제어 화면돠 디스플레이가 제공됩니다.

Preset screens for use right out of the box

 

커스터마이징 스크린

커스텀 디스플레이 (/CG 옵션)

트랜드, 숫자 및 막대 그래프와 같은 디스플레이 개체를 원하는 방식으로 정렬하여 환경에 맞게 사용자 지정된 모니터 디스플레이를 만들 수 있습니다. 펌프를 시작/정지하고 다른 작업을 수행합니다.

Custom display (/CG option)

 

커스텀 디스플레이 제작 소프트웨어
DAQStudio DXA170

DAQStudio 는 커스텀 디스플레이를 작성할 수 있는 소프트웨어 입니다. 작성한 디스플레이 화면은 이더넷이나, 외부 메모리 (SD/USB) 등을 통해 디스플레이 가능합니다.

Custom display building software DAQStudio DXA170

Common objects used in custom displays (DAQStudio)

 

높은 유연성과 확장 가능한 아키텍쳐

모듈러 인/아웃

입력과 출력은 쉽게 확장할 수 있도록 모듈식입니다. GP 다채널 페이퍼리스 레코더 메인 유닛만으로도 최대 100채널(GP20)의 측정을 제공합니다.

Modular input/output

 

다양한 입/출력 모듈

다양한 입/출력 모듈 중에 선택 가능합니다.

Wide variety of input/output modules

 

Model Name Measurement/Application Channels
GX90XA-10-U2 Analog input module DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (solid state relay scanner type) 10
GX90XA-10-L1 DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (Low withstand voltage solid state relay scanner type) 10
GX90XA-10-T1 DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (electromagnetic relay scanner type) 10
GX90XA-10-C1 DC current (mA) (solid state relay scanner type) 10
GX90XA-10-V1 DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (Solid state relay scanner type) 10
GX90XA-04-H0 DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (individual A/D type) 4
GX90XA-06-R1 4-wire RTD, 4-wire resistance (solid state relay scanner type) 6
GX90YA Analog output module Current output 4
GX90XD Digital input module Remote control input or operation recording 16
GX90YD Digital output module Alarm output 6
GX90WD Digital input/output module Remote control input or operation recording/alarm output DI:8/DO:6
GX90XP Pulse input module Pulse signal data acquisition, integral count 10
GX90UT PID control module PID control (2 loop) AI:2/AO:2
DI:8/DO:8

* 각 모듈의 상세는 일반 사양서를 참고해주시기 바랍니다.
Product Finder를 통해서도 모듈 선택이 가능합니다.

 

최대 450 채널까지 확장 가능

최대 450 채널까지 측정을 지원 합니다. MATH 및 통신 채널이 포함된 경우 GP20 대용량 메모리 유형은 최대 1000개 채널에 기록할 수 있습니다. GP 메인 유닛과 확장 가능한 I/O는 모두 동일한 입출력 모듈을 사용할 수 있습니다

Expandable to up to 450 channels (real actual input)

허브 또는 리피터를 통해 연결하지 않고 LAN 케이블과 직접 연결할 수 있습니다. * GM Data Acquisition System의 하위 장치를 연결할 수도 있습니다.

Model Type Max.channels Number of channels by configuration
GP10 Standard 100ch Main unit only 0-30
Main + expandable I/O 0-100
GP20 Standard 100ch Main unit only 0-100
Main + expandable I/O 0-100
Large memory 450ch Main unit only 0-100
Main + expandable I/O 0-450

채널 수는 아날로그 입력 전용 입니다.

 

분산 설치를 통해 배선 절감

레코더를 DUT에서 떨어진 오프사이트에 설치하면 열전대 및 기타 센서의 장거리 배선 없이도 현장에 확장 가능한 I/O를 배치하고 데이터를 모니터링할 수 있습니다.

Reduce wiring with distributed installation

 

다양하고 편리한 PID 제어

PID및 프로그램 컨트롤

  • PID 컨트롤 모듈
    모듈 당 2-루프, 최대 20 루프
  • Set 포인트 프로그램 제어 기능 (/PG 옵션)
    최대 99 패턴

PID and program control

 

웹브라우저를 통한 실시간 원격 모니터링

웹 브라우저를 통해 GP를 실시간으로 모니터링하고 설정을 변경할 수 있습니다. 추가 소프트웨어 없이도 손쉽게 비용이 적게 드는 원활한 원격 모니터링 시스템을 구축할 수 있습니다.

실시간 모니터링 스크린
GP 메인 장치에서 트렌드, 디지털 및 기타 디스플레이와 동일한 모니터 화면을 실시간으로 볼 수 있습니다.

Real time monitoring screen
*웹브라우저에서 Java 플러그인이 동작 중인 SMARTDAC+ 시리즈

 

웹브라우저 온라인 세팅
설정화면을 통해 AI채널 설정 등을 엑셀로 복사하여 편집할 수 있으며, 편집 후 설정화면으로 데이터를 다시 가져올 수 있습니다.

Enter settings online with a web browser

 

GX/GP 설정 및 파형 뷰어 전용 소프트웨어 (무료 Download)

Universal viewer

GX/GP에 저장된 데이터 파일을 보고 인쇄할 수 있습니다. 영역에 대한 통계 계산을 수행하고 ASCII, Excel 또는 다른 형식으로 내보낼 수 있습니다.

Universal viewer

Offline setting software

설정을 저정하거나 저장된 내용을 GX/GP 로 보낼 수 있습니다.

Offline setting software

 

열처리 응용을 위해 항공우주 산업의 AMS2750/NADCAP 및 자동차 산업의 CQI-9를 지원

리브레이션 보정 스케줄 제어 기능 (/AH 옵션)

캘리브레이션 보정 등을 주기적으로 실행하기 위한 일정 관리, 단위 및 센서 의존성에 대한 보정 계수를 별도로 설정할 수 있으며, AMS2750의 경우 TUS(온도 분포 테스트) 보고서를 쉽게 작성할 수 있는 TUS 소프트웨어*를 제공합니다.*
* TUS 소프트웨어에 대한 상세는Yokogawa 영업 담당자와 상담하세요.

GX/GP /AH option

 

설비 세트 당 별도의 파일로 레코더 데이터 저장

멀티-배치 기능 (/BT 옵션)

독립적인 시작 및 중지 제어로 데이터 파일을 분리하기 위해 사전 정의된 채널 그룹을 기록합니다. 최대 12개의 독립 배치를 만들 수 있습니다.

Multi-batch Function (/BT option)

 

끊김없는 데이터 누적

복잡한 제어 패널을 단순하고 유연한 데이터 수집 스테이션에 결합하고 통합합니다.

Seamless integration

 

고속 측정 (최속 1 ms)

Yokogawa의 독자적인 A/D 컨버터는 고속 모듈이 1ms의 빠른 데이터 포인트를 측정할 수 있도록 합니다.

  • 고속 (1 ms) 측정*
  • 독자적인 A/D 컨버터

*With 1ch per module. At 2 ms, 2 ch per module, and at 5 ms or more, all 4 ch per module.

Max. channels
Model Scan interval
1ms 2ms 10ms
GP10 1ch 5ch 10ch
GP20-1 1ch 5ch 10ch
GP20-2 5ch 25ch 40ch

High speed measurement (down to 1 ms)

 

두 개의 서로 다른 스캔 인터벌을 사용한 듀얼 인터벌

사용자는 단일 GX/GP 시스템에서 두 개의 서로 다른 스캔 인터벌을 선택할 수 있는 기능이 있습니다. 이를 통해 사용자는 단일 시스템에서 두 개의 서로 다른 스캔 인터벌로 다양한 유형의 입력에 대해 유연하게 대응 할 수 있습니다. 예를 들어, 온도와 같은 느린 변화 와 압력, 진동과 같이 빠르게 변화하는 신호의 효율적인 동시 측정을 제공합니다. 모듈은 측정 그룹 할당으로 인터벌을 각각 설정할 수 있습니다.

Dual interval measurement with 2 scan intervals.

 

MATH (레포트 포함), 이벤트 션

MATH 기능 (/MT 옵션)

기본적인 수학 및 함수(제곱근, 로그, 삼각법)를 포함한 다양한 종류의 수학 계산을 지원합니다. 측정 또는 계산된 데이터에 대한 변수를 사용하여 공식을 작성하고 결과를 저장 또는 표시합니다. 이를 통해 후처리에 대한 시간과 노력을 절약할 수 있습니다. Report(레포트) 기능을 사용하여 시간별, 일별, 월별 및 기타 보고서를 만듭니다

이벤트 액션

데이터 수집 스테이션의 작동 중에 특정 이벤트에 연결된 작업을 할당할 수 있는 기능입니다.

Event actions

 

레포트 작성 및 네트워크 기능 (/MT 옵션)

어떤 템플릿으로도 자동으로 레포트를 작성

임의로 작성한 양식 템플릿을 GP의 내부 메모리에 읽어오면 Excel 또는 PDF 형식의 보고서가 자동으로 생성되며 LAN 연결을 통해 프린터로 출력할 수도 있습니다.

Report creation and network functions

 

다양하고 편리한 네트워킹 기능 제공

모드버스/TCP, 모드버스/RTU 통신

GP는 이더넷 통신을 위해 Modbus TCP/IP 클라이언트 및 서버 모드를 지원하고 선택적 직렬 통신을 위해 Modbus RTU 마스터 및 슬레이브 모드를 지원합니다.

모드버스/TCP (이더넷 접속)

Modbus/TCP 및 Modbus/RTU 기능을 사용하여 GP의 서버 및 슬레이브 장치에서 데이터를 표시하고 저장할 수 있습니다.

* 통신 채널 필요 (/MC 옵션)

Modbus/TCP (Ethernet connection)

모드버스 RTU (RS-422A/485 접속)

모드버스/TCP 와 모드버스/RTU 기능을 사용하여 GP의 데이터를 상위 설비에서 취득할 수 있습니다.

Modbus/RTU (RS-422/485 connection)

(최대 16개의 모드버스/TCP 서버와 접속 가능,  GP20-2의 경우 32개까지 가능)
(최대 31개의 모드버스/RTU 슬레이브와 접속 가능)

 

EtherNet/IP Function (/E1 option)

EtherNet/IP 서버 기능을 사용하여 PLC 또는 다른 장치에서 GX에 액세스하여 측정/연산 채널을 읽고 통신 입력 채널에 쓸 수 있습니다(GX10: 최대 500ch, GX20-1: 최대 300ch, GX20-2: 최대 500ch). 통신 채널 기능(/MC 옵션)이 필요합니다.

또한 배치 프로세스에 필요한 다음 작업은 명시적 메시지를 사용하여 PLC를 통해 수행할 수 있습니다.

참고: OMRON PLC에서 명시적인 메시지 작업이 확인되지 않았습니다.

EtherNet/IP Function

 

CC-Link family SLMP 통신 (/E4 옵션)

시퀀서 프로그램 없이 GP에서 미쓰비시 전기 PLC로 연결할 수 있는 프로토콜 기능. GP를 SLMP 클라이언트로 실행하여 PLC에 GP 측정 데이터를 기록하고 통신 채널에 PLC 데이터를 기록할 수 있습니다.*
*통신 채널 기능 필요 (/MC 옵션).

SLMP Communication

 

PROFINET 통신 (GX90NW Network 모듈)

GX90NW 네트워크 모듈을 사용하여 PROFINET을 통해 보조 I/O 장치로 GX/GP를 연결할 수 있으며, PLC 또는 기타 I/O 컨트롤러에서 GX/GP에 액세스하여 측정/산술 채널을 읽고 통신 채널에 쓸 수 있습니다.

* PLC에서 Batch 프로세스에 필요한 작업을 쉽게 수행할 수 있습니다.

PROFINET communication (GX90NW Network Module)

 

장치 성능 평가 테스트를 위한 강력한 Tool (/E2 와 /MC 옵션)

전력 측정 기기(WT series power analyzer)에서 정밀도가 높은 측정 데이터를 GP에 대한 충실도 손실 없이 획득할 수 있으며, GX 자체 측정 데이터와 함께 기록 및 표시할 수 있습니다. 이는 기기 전력 소모, 온도 및 기타 현상을 동시에 기록할 수 있기 때문에 성능 평가 테스트에 이상적입니다.

  • 접속 가능 모델:
    Yokogawa Test & Measurement Corp.,
    WT series power analyzers,
    WT300/WT300E (command mode WT300), WT500, WT1800/WT1800E (command type WT1800)
  • 최대 접속 수: 8 (GP10), 16 (GP20)

Powerful tool for instrument performance evaluation testing (/E2 and /MC options)

 

OPC-UA Server (/E3 옵션)

GP에 의해 획득된 데이터는 호스트 시스템(OPC-UA 클라이언트)으로부터 이더넷 통신을 통해 액세스될 수 있습니다. 업스트림 시스템으로부터 GP 통신 채널로 쓰기 위해서는 통신 채널 기능(/MC 옵션)이 필요합니다.

OPC-UA Server (optional code /E3)

 

DARWIN-호환 통신

GX는 DARWIN 통신 명령을 지원합니다. GP에서 현재의 DARWIN 통신 프로그램을 그대로 사용할 수 있습니다.*
* 자세한 내용은 대리점 또는 가장 가까운 Yokogawa 대리점에 문의하십시오.

CENTUM/STARDOM 통신 패키지

  • CENTUM: LFS2432, DARWIN/DAQSTATION Communication package (for ALE111 [Ethernet])
  • STARDOM: NT365AJ DARWIN connection package

DARWIN-compatible communication

 

FTP-기반 파일 전송

FTP 클라이언트/서버 기능을 사용하면 중앙 파일 서버에서 데이터를 쉽게 공유하고 관리할 수 있습니다.

FTP-based file transfer

 

E-mail 메시지 전송 기능

알람 발생 정보, 예약 순시값, 보고서 데이터 등을 이메일로 전송합니다.

E-mail messaging function

 

자동 네트워크 설정 (DHCP) 기능

Dynamic Host Configuration Protocol (DHCP)을 사용하여, 혜에 자동으로 (IP address) 설정을 할 수 있습니다.  이를 통해 공장 네트워크에 장치를 설치하는 것이 그 어느 때보다 쉬워집니다.

Automatic network setup (DHCP) function

 

네트워크 시간 서버를 통한 시간 동기화

GP는 클라이언트 모드에서 SNTP 프로토콜을 사용하여 네트워크 타임 서버로부터 시간 정보를 획득합니다. 이 기능은 시설 내의 임의의 수의 GP 유닛이 정확하게 동기화된 시간을 가질 수 있도록 합니다. 모든 유닛은 조정된 날짜 및 타임 스탬프 정보와 함께 데이터를 기록합니다. 또한 GP는 서버로서 기능하여 네트워크의 다른 SNTP 클라이언트 유닛에 시간 데이터를 제공할 수 있습니다.

Time synchronization with network time servers

 

견고한 하드웨어와 높은 보안성

확고하게 저장된 데이터

측정 및 계산된 데이터는 보안 내장 비휘발성 메모리에 지속적으로 저장됩니다. 수동 또는 예약 간격으로 메모리의 파일을 이동식 미디어에 복사합니다. 또한 파일을 복사하여 FTP 서버에 보관할 수 있습니다.

비휘발성 메모리의 고유한 신뢰성과 보안 때문에 작동 조건이나 정전 이벤트에서 데이터가 손실될 가능성은 매우 적습니다.

Be confident that recorded data is saved

 

어플리케이션에 대한 파일 형식 선택

보안을 강화하기 위해 측정된 데이터를 Binary 형식으로 저장할 수 있습니다. 이 형식은 기존 텍스트 편집기 또는 다른 프로그램에서 해독하거나 수정하기가 매우 어렵습니다. 텍스트 편집기 또는 스프레드시트 프로그램에서 데이터를 쉽고 직접 열 수 있도록 하려면 텍스트 형식을 선택하십시오. 이를 통해 전용 소프트웨어 없이도 측정 데이터를 사용할 수 있습니다.

Select file formats according to your application

 

보안성 강화

고객 데이터의 안전한 송수신

Security enhancements
SSL:  TCP/IP 네트워크 상 데이터 송수신을 위한 보안 프로토콜

전면 패널 도어 잠금 장치

전면 패널 도어를 잠글 수 있으므로 전원 스위치 또는 외부 미디어의 잘못된 취급 및 접근을 방지할 수 있습니다.

Front panel door lock

 

아날로그 front end 모듈

전용 A/D 컨버터를 통해 고속, 고정밀 데이터 수집(High Speed AI, PID Control 모듈)

Analog front end module

Standards supported

GX는 CSA, UL, CE/EMC 지침/CE/정전압 지침, 유럽 RoHS 지침, WEEE 지침, RCM, KC Mark(한국) 등 다양한 표준을 지원합니다

Standards supported

 

엄격한 데이터 보안 대응
Advanced security function 옵션 (/ AS)을 통해 엄격한 데이터 관리 요구 사항에 대응

SMARTDAC+ GX/GP/GM Advanced Security 옵션(/AS)은 의약품 제조, 생명공학, 건강 관리 및 의료 기관과 같은 응용 분야에서 안전하고 추적 가능한 데이터 관리를 제공합니다.
고급 보안 기능은 데이터 관리를 위한 미국 FDA 21 CFR Part 11, EU-GMP Annex 11 및 기타 관련 지침의 엄격한 요구 사항을 지원합니다.
또한 PIC/S, WHO, MHRA 및 FDA 지침 문서에 언급된 ALCOA+(속성, 판독 가능, 현대적, 원본, 정확, 완료, 일관성, 지속성, 가용성)에 따라 데이터 무결성을 지원합니다.

FDA 21 CFR Part 11

"ALCOA +"?
A: 귀속성(attribution), L: 가독성(Legibility), C: 동시성(simultaneity), O: 독창성(Originality), A: 정확성(Accuracy), C: 완전성(Completeness), C: 일관성(Consistency), E: 지속성(Oresistence), A: 가용성(Availability)을 의미합니다. ALCOA +는 PIC / S (의약품 시험 계약 및 의약품 시험 공동 체계), WHO (세계보건기구), MHRA (의약품 및 의약품 규제 당국: 영국), FDA (식품의약품청)의 데이터 무결성 가이드라인 요건입니다.

디지털 기록 데이터 보안

측정된 데이터, 설정 및 작업 로그가 하나의 인코딩된 이진 파일에 저장됩니다. 이진 형식의 인코딩된 데이터는 대부분의 텍스트 편집기에서 열 수 없으므로 높은 수준의 보안을 제공합니다.
데이터 파일이 손상되거나 변조된 경우 SMARTDAC+ Standard Universal Viewer 소프트웨어가 부적합 사항을 식별하고 이에 따라 사용자에게 알립니다.

보안성이 확보된 파일 및 데이터 전송

SMARTDAC+는 FTP 서버에 자동으로 데이터를 전송할 수 있으며, SSL을 사용하여 FTP를 통해 전송되는 데이터를 암호화하는 FTPS도 지원되어 데이터 파일을 안전하게 전송할 수 있습니다.

SSL-based encryption

전자 서명(데이터 레코드 사인)기능

측정 데이터는 GX/GP(내부 메모리에 있는 데이터만 해당) 또는 SMARTDAC+ Standard Universal Viewer 소프트웨어에 표시 및 확인이 가능하며, 해당 데이터에 전자 서명을 적용할 수 있습니다. 서명은 운영자, 관리자, 품질 관리의 세 가지 수준이 있으며, 서명은 합격/불합격, 주석 등의 정보와 함께 데이터에 저장하여 검토 및 감사할 수 있습니다.

*GM에 대한 전자서명은 SMARTDAC+ Standard Software에서만 가능하며, GM의 웹서버를 통해 전자서명을 신청할 수 없습니다.

Sign Record

로직 보안

데이터 무결성을 위해서는 올바른 사용자가 올바른 정보에 액세스할 수 있어야 합니다.
SMARTDAC+는 다양한 액세스 권한을 가진 사용자를 생성할 수 있습니다.

  • 4가지 주요 보안 수준(사용자 및 모니터 사용자의 두 가지 별도 관리자 역할)
  • 최대 200명까지 등록할 수 있습니다.
  • 프로세스 소유자/시스템 소유자에게는 자신의 역할에 적합한 기능에 대한 액세스 권한이 부여될 수 있습니다.
  • 암호의 경우 최소 문자열 길이와 최소 정책 복잡도를 설정할 수 있습니다.
  • Active Directory를 통해 네트워크의 서버를 사용하여 사용자 이름과 암호를 중앙 집중식으로 관리할 수 있습니다.

Logical Security

Audit 추적 기능

SMARTDAC+ 의 동작 로그는 측정 데이터와 함께 파일에 저장됩니다.
설정 변경 시 설정 변경 작업과 함께 변경 사유 기록이 가능하며, 또한 "설정 차이 작업 이력"에서 설정 변경 내역을 확인하면 감사 시 데이터 확인 작업이 크게 줄어듭니다.

Audit trail function

 

무료 소프트웨어 제공

SMARTDAC+ Standard Software를 통해 측정 데이터 표시, 작업 로그 표시, GX/GP/GM 구성이 가능하며 SMARTDAC+ Standard Universal Viewer를 사용하여 데이터를 로그인할 수도 있습니다.

Universal Viewer software

Universal Viewer 소프트웨어는 파형, 수치 등 다양한 형태로 데이터 파일을 표시할 수 있으며, 측정 데이터뿐만 아니라 알람, 메시지 목록, 작업 로그 등을 표시하고 출력할 수 있으며, 작업 로그를 통해 변경 전 설정과 변경 후 설정을 비교하여 표시할 수 있어 자세한 변경 내용을 확인할 수 있습니다.
측정 데이터 확인 후 사용자 이름, 사용자 ID, 비밀번호를 입력하여 서명할 수도 있으며, 이미 서명이 완료된 데이터라면 화면에서 서명 상태를 확인한 후 다른 레벨로 서명할 수 있습니다.

Universal viewer

Hardware Configurator software

Hardware Configurator 소프트웨어는 이더넷 통신뿐만 아니라 SD 메모리 또는 외부 저장 매체를 통해 가져올 수 있는 오프라인 시스템 구성을 허용합니다. 시스템 설정은 GX/GP/GM 시스템 유효성 검사(IQ/OP/PQ)를 지원하기 위해 테이블 형식으로 인쇄할 수 있습니다.
또한 선택한 설정 데이터 파일 페어를 비교할 수 있으며 그 차이를 테이블 형식으로 표시하고 인쇄할 수 있습니다.

Offline setting software

 

Validation 문서

Validation 문서(별매)는 GX/GP/GM과 SMARTDAC+ Standard 시스템 Validation을 간소화한 Validation 프로토콜 템플릿으로, 편집이 용이하도록 Yokogawa 웹사이트에 MS Word 파일로 제공됩니다.*

*확인 및 문서 확인은 고객의 책임입니다.

자료실

Overview:

Performing control while changing the set point temperature moment by moment is called running a program pattern (or simply running a program). Sterilization and pasteurization require maintaining specific temperatures for specific durations. 

업종:
Overview:

SMARTDAC+ GX series records the clean room temperature, humidity, atmospheric pressure, door openings and closings, etc.

Overview:

The GX20 and GX90UT offer an average value computation function making it ideal for controlling temperature and other fluctuating phenomena. The operating status can be controlled in real time, providing operating cost reductions.

Overview:
  • Universal inputs provide support for thermocouple, RTD, voltage, and a variety of other input signals.
  • Lineup of models for up to 450 inputs.
    Allows multipoint monitoring and recording on a single unit.
  • Easily enables network-based data management. 
    file transfers, Web monitoring, and alarm e-mail
Overview:

Multi-touch technologies have rapidly moved from the commercial to the industrial sector where they are being used to enhance data analysis.

If using the product's reference junction compensation function with GX90XA module thermocouple inputs, do not install a "GX90XA-10-C1" mA module or "GX90WD" digital input module into the slot to the right* of the GX90XA modul...
First Step Guide (IM 04L51B01-02EN) ◊See "Wiring" under Installation and Wiring. First Step Guide (IM 04L51B01-02EN)
It depends on the mode. In 10 ch mode, measurement can occur on CH1-CH10; in 2 ch mode, CH1-CH2. In 10 ch mode, A/D integral time is fixed at 1.67, and measured values (especially with temperature measurements from thermocouples) may fluctuate becaus...
Yes. However, this requires the communication channel option (suffix code: /MC).
The number of channels that can be displayed per group is as follows. GX20/GP20: 20 channels GX10/GP10: 10 channels
The number of channels that can be displayed in the overview is as follows. GX20/GP20: 100 channels GX10/GP10: 30 channels
On the SMARTDAC+ GX20/GP20, channels exceeding the 100th channel are not displayed. (GX10/GP10: 30 channels) AI, DI, DO channels are given priority, and then MATH channels are displayed in any remaining positions.
Yes. The digital input module remote function corresponds to that.
Yes. For details, see the user's manual (IM 04L51B01-01EN) ◊2.2.6 "Writing Freehand Messages." User's Manual (IM 04L51B01-01EN) ...
3600 points worth of data can be displayed. When the sampling interval is 1 second, 1 hour's worth can be displayed. For details, see the user's manual (IM 04L51B01-01EN) ◊3.1.4 "Monitoring the GX/GP Data." User's Manual (I...
Yes. For details, see the user's manual (IM 04L51B01-01EN) ◊2.2.4 "Displaying the Multi Panel (GX20/GP20 Only)." User's Manual (IM 04L51B01-01EN) ...
No, it cannot. The computation interval is the same as the specified scan interval. For scan interval settings, see the user's manual (IM 04L51B01-01EN) ◊1.7 "Setting Measurement Conditions." User's Manual (IM 04L51B01-01EN) ...
You can use a flash memory of up to 2 TB.
SD memory cards. You can also manually save the data to USB flash memories.
No. Text files are saved in either text or binary format. You can select the file saving format in one of the following ways. Main unit: MENU key >[Screen change]tab > [Settings] > Settings menu [Data save settings] Web browser: [Settin...
Yes. They can be viewed with waveforms in the historical trend display. You can also view them with the Universal viewer software.
When the Media FIFO function is ON: Up to 1000. When the Media FIFO function is OFF: No limit. * Media FIFO function: During Auto Save, if there is no available space on media, the oldest files are overwritten by the newest ones. ...
No. Only report files and snapshots can be printed directly from the main unit. You can print measured data from the Universal viewer software.
Any printers that support the HP-PCL5* printer language can be used. We have already confirmed the operation with the following 7 models.   HP: OfficeJet Pro 8210 HP:M451dn OKI:C332dnw OKI:C531dn KYOCERA:Ecosys P5026cdw KYOCERA:FS-C5250D...
Approximately 5400 days. A quick calculation with 12 bytes/ch (display data) and time data 16 bytes/sample is as follows: 12 × 4 + 16 = 64 bytes 1000 M/64 = 15.6 M times 15.6 M × 30 sec Approx. 5400 days ...
Files consist of "information other than sampled data," and "sampled data." For details on calculations, see the user's manual (IM 04L51B01-01EN) ◊Appendix 1, "File Size of Display Data and Event Data." User'...
No. Only one module option can be selected (either suffix code /Uxxx or suffix code /CRxx). If you need to add more modules, please order them separately. Note that if you do add additional modules, you must reconfigure the system.
The GX is a panel mount type. The GP is a portable type.
Yes, using an event action.
Yes. You can access the main unit via FTP, output a list of files and folders on the unit's external memory medium (SD memory card), and transfer, delete, or perform other operations on those files. *For access from a web browser, enter "ftp...
The following files can be displayed. Display data files Event data files TLOG data files Report data files (including hourly, daily, weekly, monthly, batch, custom daily, user) Manual sample data files Note, it can also load and display fil...
In addition to the GX/GP series, the Universal viewer can display files created on existing models (the DX, DXP, CX, and MV series). It also supports display and signing (electronic signatures) of files from Part 11-compliant models. For details, se...
Yes. It is available as an accessory. The part number is B8740BZ. For inquiries about purchases, contact us at the following. Purchase inquiries ...
Yes. They are available as accessories. 10 Ω (model 438922), 100 Ω (model 438921), and 250 Ω (model 438920) are available. For inquiries about purchases, contact us at the following. Purchase inquiries ...
Yes. For inquiries about purchases, contact us at the following. Purchase inquiries
For inquiries about purchases, contact us at the following. Purchase inquiries
Suffix code /UC10 indicates that the GX90XA-10-U2N-3N is pre-installed in the GX/GP main unit.
If the suffix code is /CRXY, "X " is the number of GX90XDs installed in the GX/GP main unit, and "Y " is the number of GX90YDs installed. Suffix code /CR11 indicates that one GX90XD digital input module and one GX90YD are pre-inst...
Please check your web browser's display magnification. If other than 100%, the display may look strange.
It is possible the unit does not recognize the new module. Press Menu > Screen Change > Initialization > Reconfiguration, then try to enter the range settings again.
Turn OFF the media FIFO function. If the media FIFO function is ON, files older than the 1000th-oldest file are automatically deleted.
Use the SD card icon on the screen to check this. If 10% or less of free space remains, the icon turns red.
Yes. The main unit detects whether measured data was saved to the SD card. If automatic saving to the SD card is turned ON, any unsaved measured data is saved when you reinsert the SD card.
If you only want to read data via Modbus/TCP, you do not need an option. However to write data you will need the communication channel option (suffix code: /MC).
Compared to the electromagnetic relay scanner type, the semiconductor relay scanner type (suffix code /U2) has high resistance, and although it may be affected by noisy environments, it can be used semipermanently at high speeds. Compared to the semi...
Yes. There is a bias value setting on the corresponding AI channel. Set this value to -1.0°C.
Yes. With the Event/Action function, you can set an action to "Switch display group" or "Display favorite screen" and set the event to an alarm or a remote signal.
If the channel's range is DI, you can use a character string for the screen display.
Yes, the MATH option supports Tetens' formula. You can calculate the saturated water vapor pressure while measuring the temperature.
Snapshots are saved in PNG format.
If you increase the number of assigned channels to one group (not only on the GX20), lack of space can result in some characters being truncated. To view the tag numbers, double-tap the numeric display in the trend screen to display "Channel Inf...
We have validated operation using 8 GB and 16 GB cards. Please see the SD memory cards that have been validated. List of Verified SD Memory Cards (SD Cards) ...
For instruments that support RoHS 10 restricted substances, see GS 04A01A01-02EN. For instruments that support RoHS 6 restricted substances, see GS 04A01A01-00EN. ...
Yes. Set the length to something longer than 1 day, and set a match time timer of 0 hr 00 mm. Next, make the match time timer an event, and set saving of display data as an action. For setting examples, see section 1.19, "Configuring the Event A...
A scale cannot be displayed if the channel is set to only record event data. To display a scale, set the recording channel for display data.
Check the amount of free space on the SD memory card, or switch to an empty SD memory card.
The POODLE attack (Padding Oracle On Downgraded Legacy Encryption) which abused the vulnerability of SSLv3 protocol has become a recent topic. Since the SSL communication has been supported from the release number 2 of SMARTDAC+ series, the following...
Yes. See section 1.22, "Listing Files That Are on the External Storage Medium" in the user's manual. Note that directories (folders) cannot be deleted. User's Manual (IM 04L51B01-01EN) ...
Yes, with the FTP server function. See section 3.3, "Accessing the Measurement Data File on the GX/GP from a PC (FTP Server Function)" in the user's manual. User's Manual (IM 04L51B01-01EN) ...
If you load a data file that includes a freehand signature in the Universal viewer, you can view the freehand signature in the Image Mark dialog box. Also, an "Image bar" and "Image button" are displayed above the waveform display...
Yes. Output to printers is performed using report templates set in the PDF report files. You can load template files (tpl files) onto the main unit. For the settings of the reports to be output, turn PDF file ON in the report settings of the settings...
The scale image is turned ON under MENU key > [Screen change] tab > Settings > Settings menu [Display settings] > [Group settings]. Turn this OFF. For details, see section 1.6, "Setting Display Conditions" in the user's manu...
Yes, you can use the SMARTDAC+ Excel report simulator. This simulator outputs a simulated report using a GX/GP setting file and record template file. Viewing the test file helps you check for errors in your template (formatting, spelling, etc.). It c...
Q: When using the FTP client function, if the power cuts out during recording start and I turn the power back on, the message, "E657 Ethernet cable is not connected" or "E691 IP address is not set or FTP function is not available"...
Depending on the response speed such as hub or router connected to the main unit, it may take time before the Ethernet Link is established. Therefore, the error message will appear if the time adjustment by SNTP is performed before the Ethernet Link ...
The GX/GP series uses a resistive touch screen, therefore you can operate it with rubber gloves and other insulating items.
The black cover option (suffix code /BC) lets you change the white front door (cover) to black. Refer to the picture in the catalog.
Yes. On the SMARTDAC+ web service screen, click Message, select fixed or free message, and then write the message. If Message is not displayed, click Data > Trend.
Yes. In the following configuration, it would be functionally equivalent to one GX60 I/O base unit. GM90PS power supply module: 1 GX90EX I/O expansion module: 1 GM90MB module base: 7  
Yes. However, you must not do a ring type connection, or no expansion units will be recognized.
The largest SD memory card the GX/GP series can use is the SDHC standard 32 GB. It doesn't support anything larger than that.
Install DAQSTANDARD (model DXA120, 1 license comes standard with the DX1000/DX2000) in the same folder as the SMARTDAC+ STANDARD Universal Viewer. When you install DAQSTANDARD, select “Custom” for the Setup type, and change the installati...
Analog input modules are installed in the bottom slots 0-4, starting with 0. Digital I/O modules are installed in the top slots 5-9, starting with 5. The DI takes priority when installing.
The GX90EX expansion module is not installed in the correct position. Install the GX10/GP10 in slot 2. Install the GX20/GP20 in slot 9.
Yes. The SMARTDAC+ GX/GP/GM can perform Modbus communications with up to 4 sequencers.
For user number 1, the default user ID is blank (no ID), and the default password is “User001”. For details, see section 2.3.1, “Logging In” in user's manual IM 04L51B01-05EN. ...
Two points of the SMARTDAC+ GX/GP series display data are displayed and recorded, the maximum and minimum values of the sampling data within the recording interval. For an image of the screen display, see “Basic Functions of the GX/GP” on...
For an advanced security (/AS) model, log in to the mobile web application as the “Monitor” user. Set up the “Monitor” user on the GX/GP ahead of time.
On the menu of Universal Viewer, select File > Print Settings. In the Print Settings dialog box, change the Y Axis Column Num setting.
Add approval information using the signature privileges that existed before you changed them.
No. You can distinguish files by the specified string and batch name (batch number - lot number).
E001 appears when the version of Hardware Configurator is old, or does not support the main unit's firmware version. Check the version of Hardware Configurator, and if old, upgrade using the web download service.
Erorr 211 occurs when Alarm settings, Report settings, Scheduled settings, or System settings are not configured in the email sending condition settings.
The causes of this message appearing are as follows. When jumping from the alarm summary to a historical trend, recorded data is not found in internal memory When jumping from the message summary to a historical trend, recorded data is not found ...
This is possible. This requires option /MC (communication channel function), and either /C3 (RS-422/485) or /C2 (RS-232).
Yes. For details, see "Alarm Sound" in section 3.1.7, "Changing the Display Settings on the Browser" in user's manual IM 04L51B01-01EN. ...
On an advanced security (/AS) model, only monitor users can log in to an FTP server. Set up log in via communications, and then register a monitor user. For details, see section 1.3.3, "User Levels" and 2.2, "Registering Users and Sett...
When a report file is created, or when recording stops.
Please refer to “Installation and Wiring” in the First Step Guide (IM 04L51B01-02EN).
Yes, it's part number B8740CZ. You can order from participating dealers.
The English version of Windows is recommended. Use one of the following operating systems. Windows 7 (32-bit) Windows 7 (64-bit) Windows 8 Windows 2008 Server (32-bit) Windows 2008 Server R2 (64-bit) Windows 2012 Server With Japanese Window...
You can download these items from the Partner Portal member site *Log-in Required. You must register (free) to use Partner Portal.
You can read data via SLMP communications. Set up the data registers and other communication conditions on the GX. For details, see user's manual IM 04L51B01-21EN. ...
Yes, they are: display data files (*.GDS、*.GSD), event data files (*.GEV、*.GSE), report data files (*.GRE), and manual sample data files (*.GMN). For details, see user's manual IM 04L61B01-01EN. ...
They include the mounting bracket (GX only), SD memory card, tag plate, stylus, and the printed edition of the first step guide. For details, see "Standard Accessories" in the first step guide (IM 04L51B01-02EN). ...
First, install the expansion module into slot 9 (GX20/GP20) or slot 2 (GX10/GP10). Turn the power to the GX/GP main unit and the expansion module OFF before inserting the expansion module into the GX/GP, and before setting dip switches. For details, ...
It displays the unit number (00–06) and error code. If “Fx” appears, servicing is required. In that case, please contact representative from whom you purchased the product. For details, see section 5.2 Troubleshooting “Ex...
The channel name is composed of the unit number, slot number, and channel number. For example, a channel name of “0101” means unit number 0 (main unit), slot number 1, and channel number 01. For details, see “Installation and Wiring...
For screw type terminals, we recommend using crimp-on lugs with insulation sleeves (M4 for power supply wiring, M3 for signal wiring). For details, see “Installation and Wiring” in the first step guide (IM 04L51B01-02EN). ...
Yes, the procedure is as follows. Press MENU. Tap the media eject icon. On the screen for selecting the type of media, tap SD. Remove the SD memory card. For details, see “Basic Operation” in the first step guide (IM 04L51B01-02EN...
Select USB memory. The Media operation screen appears. Tap the Memory save Data save icon. The Memory summary / Save screen appears. Press MENU. The menu screen appears. Tap the Context tab. Data save icons appear. Tap data save icon to save. T...
The display data settings are found in: MENU key > Browse tab > Setting > Setting menu > Recording Settings > Basic settings. From there, perform the following steps. Tap File type > Display. Tap Save. The recording interval s...
This requires a DO output module. The following is an example in which the DO output module is installed into slot 1, and DO output is performed at alarm level 1 on DO channel 1. If your module is already installed, you must reconfigure it. Set alarm...
You can use the Scaling function to measure flow. The following is an example using main unit slot 1, channel 1 (0101), with an input signal of 1–5 VDC at 0.0–100.0 m3/h. Go to MENU key > Browse tab > Setting >Setting menu > A...
You can set the measurement conditions by reconfiguring (module detection). Do not reconfigure while recording is starting. When reconfiguring, do not do any of the following. Turn the power ON/OFF Insert or remove modules For details, see &ldq...
The following is an example in which settings are saved to the SD memory card under file name “SF1.” Go to MENU key > Browse tab > Save load > Menu Save settings > Setting parameters. Tap Media kind > SD, and then enter the...
Start your web browser, and then in the address box, type “http://” followed by the IP address of the GX/GP. The GX/GP screen appears. For details, see “Web Application” in the first step guide (IM 04L51B01-02EN). ...
If you attempt to eject an external media while writing to it, the file writing process stops partway through. From the memory summary screen, select the file and save. Before ejecting media, check the media icon and SD memory card LED to make sure t...
Under Email, tap “Mail start” to enable the email transmission function. Tap the Universal tab and then E-Mail start.
Install the 32-bit version of Java Runtime even if you're using Windows 64-bit (even 64-bit Windows comes standard with Internet Explorer 32-bit). If you install Java Runtime 32-bit and waveforms and other items do not display correctly, you may ...
The following programs are available. SMARTDAC+ STANDARD Universal Viewer SMARTDAC+ STANDARD Hardware Configurator You can use SMARTDAC+ STANDARD Universal Viewer to display and print the following types of data that are generated by recorders....
You can use the DARWIN Compatible Communication function. You must configure your SMARTDAC+ GX/GP the same as DARWIN. For available commands, see “Using the DARWIN Compatible Communication Function (Release number 2 and later)” in user...
The alarm is only enabled when you set Alarm basic settings = Hold. For details, see “Changing the Display Settings on the Browser” in user's manual (IM 04L51B01-01EN). ...
Enable the GX/GP SMTP client function, and then configure email options. For details, see section 1.17, “Configuring the Ethernet Communication Function” in user's manual (IM 04L51B01-01EN). ...
The available types are as follows. Alarm Notification Mail Power Failure Notification Mail Memory Full Notification Mail System Error Notification Mail Periodic Notification Mail Report Notification Mail (for the math function (/MT option)) ...
Set the alarm type to delay upper limit, or delay lower limit. For details, see section 1.2.2, “Setting Alarms” in user's manual (IM 04L51B01-01EN). ...
Common writes messages to all groups. Separate writes messages to only the displayed groups. Note that even when the write method is Separate, messages will be written to all groups if no group-related screens are being displayed (such as the overvie...
E011 appears when the version of Hardware Configurator is old, or does not support the main unit's firmware version. Check the version, and if old, upgrade it. You can download the latest version of the software on the Help tab under “Web t...
It rounds to one digit lower than the display digit. In this example, 0.74 is rounded to 0.7.
This is an example with a report file type of “hourly + daily.” If the file to create is “combine,” you need the “hourly + daily” template. If it is “separate,” you need separate “hourly” an...
The following types, which have a built-in Ethernet interface. iQ-R series: RnCPU, RnENCPU Q series: QnUDVCPU, QnUDE(H)CPU, QnUDPVCPU L series: L02CPU(-P), L06CPU(-P), L26CPU(-P), L26CPU(-P)BT Note that the Communication channel function (/MC ...
Yes. To configure display group settings, on the View menu, click Display Group Setting. Or, click the Display Group Setting button. Use Scale (max, min) to zoom the scale in or out. For details, see section 3.1.2, “Setting Display Group Detail...
When writing I/O channel data using SLMP communications, specify channels within the same module for the first and last channels of the SLMP communication command. When writing data from multiple modules, use different command numbers for each module...
The RS-232 connector screws are imperial. The D-Sub 9-pin connector on the main unit side is male.
No. Alarm levels 1-4 are settings for alarm type (upper limit, lower limit, etc.), alarm value, and other parameters. You can set alarm levels 1-4 independently.
SLMP communication errors appearing in yellow are all error code responses from the PLC side. ERROR 4031 is a “CPU device specification” error. Check whether the specified device is within the range. Note that SLMP device start numbers ar...
When both tag text and numbers are set, the tag numbers get precedence. To display the tag text, you'll need to delete the tag numbers.
Yes. The GX20/GP20 standard type can save up to 500 files (display and/or event files). The large capacity model can save up to 1000 files.
The GX/GP is an Ethernet/IP communication adapter (server). The communication channel function (/MC) is required when the PLC writes data to the GX/GP. If the PLC only reads GX/GP I/O channel and other data, the communication channel function (/MC) i...
No, you cannot delete marks added by a recorder main unit that uses the advanced security function.
Integration continues, but its behavior changes depending on the Watchdog timer settings. For example, if using a preset value with the Watchdog timer, integration uses the preset value. If the Watchdog timer is not used, integration uses the previou...
No, the customer would need to order the GX90WD separately, and then install it into the GX/GP themselves.
The FAIL output from the FAIL terminal (suffix code /FL) is deenergized during a CPU abnormality or when the power is OFF, and operates so that NO-Com is open, and NC-Com is closed. During normal operation, it is energized, and NO-Com is closed and N...
You can access it from the Help menu in the report template builder.
Select Screen change > Save Load > Load settings > Program pattern.
Yes. ・Under System settings > Internal switch settings, set the internal switch type to Manual. ・Under Event action, set the event type to Match time timer, and the action type to Internal switch. ・Under Control event action, set the types to Inte...
You have to set the PID selection method to External selection under Screen change > Settings > Control settings > Control basic setting > Control loops.
Three items are required: ・The MATH option (/MT) on the GX/GP ・A printer that supports the HP PCL5c language, and that can print on Port 9100 over a LAN. ・The free report template builder, available for download *Log-in Required ...
Yes. Under Screen change > Settings > Control settings > OUT settings, turn the Output limit switch ON.
Yes. Under Screen change > Settings > Program control settings, turn Detailed settings upon start ON. When starting a program pattern run, you can set the start delay time.
The number of channels that you can set per group for SMARTDAC+ GX/GP series is as follows. GX20/GP20: Up to 20 GX10/GP10: Up to 10
For the analog input module's universal method, ±50 VDC, and for the high speed universal method, ±100 VDC.
It depends on the PC you are using, but you may be able to prevent the message from appearing by adding the URL of the recorder to "Trusted sites" in Windows Explorer. On the Internet Explorer Tools menu, select Internet Options > Sec...
Check the following items. Whether the IP addresses of the recorder and PC are set. Whether the LAN cable is correctly connected. In particular, whether it is connected to the recorder's internal LAN board rather than the GX90EX expansion mod...
Navigate to MENU > Screen change > Logs > FTP, check the contents of the log, then perform the corrective action under "FTP client related errors" in section 5.2 of the user's manual (IM 04L51B01-01EN), "Troubleshooting.&q...
Yes, with 4 high speed universal analog input modules and the GX20-2 (large memory model). * At a scan interval of 1 ms, one module of the high speed universal measures 1 channel. (Scan interval 2 ms: 2 channels/module, scan interval 5 ms or more: 4 ...
This only happens during FTP, and the time stamp will be correct after download. This may be a Windows related issue. See the Microsoft website.
The web application maintains a buffer for holding historical trend data. The buffer can hold 3600 data points per channel. Also, you can click the Get historical trend data icon and change the region of data that the buffer holds. For details, see &...
1) Install the GX90EX expansion module into one of the following slots.   GX10, GP10: Slot 2 (1st slot on the left when facing the back)   GX20, GP20: Slot 9 (1st slot on the left, upper row, when facing the back) 2) Set the GX90E...
For the GX20/GP20: Analog input modules are installed in slots 0-4. Digital input and output modules are installed in slots 5-9. If ordering both digital input and output modules, the input modules are installed first (in the smallest-numbered slots)...
Dummy covers come for empty slots on the GX/GP, but not for the GX60 expansion unit. Spare covers are available for purchase: PN B8740CZ.
A GX90EX I/O expansion module comes with the GX60 expansion unit, but you'll need to add a GX90EX to the GX/GP main unit.
The GX90XD digital input module is pulled up to approximately 5 VDC/1 kΩ. THe GX90XP pulse input module is pulled up to approximately 5 VDC/5 kΩ. See "Installation and Wiring" in "First Step Guide" (IM 04L51B01-02EN). ...
You can change the web application channel display format by clicking the Display Format button. See section 3.1.4, "Monitoring GX/GP data and operating the GX/GP from the monitoring screen" in the user's manual. ...
Only monitor users can log in to the web application of the enhanced security function. Administrators and general users cannot. To log in to the web application screen, register a monitor user. See section 1.3.3, "User Levels" in IM 04L51B...
Yes. Under File > Print settings, set Waveform print settings to Multiple pages, then you can change the grid (waveform printing grid) spacing along the time axis. When Waveform print settings are set to "1 page," the waveform printing g...
Yes. When you install the report template builder, a Sample Template folder is created in the installation directory. Please see the files in that folder. Ex.) Windows 7 32-bit: C:¥Program Files¥Yokogawa Electric Corporation¥SMARTDAC+ Re...
A simulator function is included with the report template builder software. For instructions, see the user's manual in the Help menu.
Yes. In SMARTDAC+ Standard Universal Viewer, select Convert > Convert data, and specify a number of “Steps.” Ex.) To filter data recorded every second and output only the data recorded every minute, specify 60 steps.
Only the time can be displayed on the GX/GP main unit, but you can select an elapsed time display on Universal Viewer.
You can use an STP LAN cable of category 5 or higher. You can use either a straight or cross cable.
Yes. The channels appear in the order that you specify when adding them to groups under Display settings > Group settings > Channel settings. The order of specified channels is shown by the small number in the lower right of the selected channe...
With a module installed, the depths from the panels are as follows. GX10: Up to 225 mm GX20: Up to 220 mm See the GX10/GX20 specifications. ...
Yes. You can use SMARTDAC+ Standard Universal Viewer to convert it to Microsoft Excel format. To convert to Excel format, in Universal Viewer, on the “Convert” menu, click “Data to”. SMARTDAC+ Standard Universal Viewer *Log-...
The reference screen button is unavailable in cases where screens that are supposed to be displayed don’t exist, such as when a display group registered in the reference screen is disabled. Re-register the reference screen. For instructions, s...
DI1-DI8 are channel numbers 01-08, and D01-D06 are channel numbers 09-14.
The function is the same, but the number of outputs differs. The “FAIL/status output relay (/F1)" of the DX1000/DX2000 has 2 outputs, whereas the “Fail output (/FL)"of the GX/GP has 1. For 2 outputs, add the GX90YD or GX90WD, so...
The function is the same, but the number of outputs differs. The “FAIL/chart paper end detected, and output (/F1)" of the µR10000/µR20000 has 2 outputs, whereas the “Fail output (/FL)"of the GX/GP has 1. For 2 output...
The GX/GP requires no main unit option specification. The GX90XD digital input module or GX90WD digital input/output module is required.
The GX/GP requires no main unit option specification. The GX90XD digital input module or GX90WD digital input/output module is required.
Data being recorded is saved at the gradually adjusted time. The time of data that are already files are not corrected.
The smallest displayed digit is rounded according to the digit to its right.
You can do this with an event action. For the settings, see section 1.19.2, “Event Action Setting Example" in the user’s manual. Note that to operate a controller with contact ON/OFF, you must set the operation mode of the digital i...
As long as the unit is not in the middle of writing to the SD memory card, you can eject the card with no problem, even during recording. Data being recorded while the SD memory card is not inserted is saved to the recorder’s internal memory. ...
If you change the user name, the password is reset. If you log in with the default password the password change screen appears and you can change to a unique password. For the default password, see section 2.3, “Logging In and Out" in IM ...
Category classifications differ depending on the suffix codes. If neither the MATH nor custom display is added, it's category 3. If either the MATH or the custom display is added, it’s category 5.
When using event data, set both "Display data, trend waveform" and "Event data" to the recording channels.
You can’t clear the alarm summary directly, but you can initialize the internal memory, including the measured data, and that will clear the alarm summary. In the user's manual, see section 1.29.1, “Initializing Settings and the Inter...
Other than changing the range, check the display groups and channels set for recording. In the user's manual, see sections 1.10.2, "Setting Display Groups" and 1.12.2, “Configuring Recording Channels." ...
Yes. Write to SMARTDAC+ GX/GP hold register 409001. 1: Record start 2: Record stop
Yes. Read input register 308001. 0: Recording stopped 1: Recording
The version of Universal Viewer you are using might be older than the recorder you are using. Try updating Universal Viewer to the latest version.
That kind of thing can happen If you set the input range on an unwired channel to TC or DC voltage (1 V or less, when open between input terminals). Set the range of unwired channels to “Skip," or short between terminals.
The following numbers are displayed in blue and black in the numeric display area when historical trends are displayed. Blue: the maximum/minimum values of the data of the overall waveform currently being displayed (on screen). Black: Maximum/minimu...
Yes, on the menu, select Display > Channel name, and then select "Tag No." or "Tag Comment."
For data acquired when the GX/GP signing type is “Batch units," sign all data files saved from recording start to recording stop together. Check whether you’ve placed all measured data files from recording start to recording stop in ...
You can connect and display files that were divided due to such things as the recorder's auto save or a power failure. However, files that were manually stopped cannot be connected and displayed.
No, but GTD and GTE files are in text format, so you can open them in a text editor.
Yes, with one of the following two methods. ・The Link All File function connects the connectable files in the folder of the currently open file. Place only the data that you want to connect in a separate folder, and then connect. ・In the "Search...
Use the cursor to select before and after the message, and then on the Edit menu, select Delete Mark.
Yes. Under File > Print settings, set Print direction to Horizontal.
Yes. Select Information > File Information, and then under File basic information, select or clear the check boxes.
Yes. On version R3.01.01 or later, there is a waveform superimpose function. For operating instructions and other information, see the user’s manual. SMARTDAC+ Standard Universal Viewer user’s manual ...
For models other than the SMARTDAC+ GX/GP series, please check the following. List of models that support software *Look at the "SMARTDAC+ STANDARD Universal Viewer" column in the table. ...
This might be related to the Java security level. Take the following actions. Method 1 Click Start > All programs > Java > Configure Java > Security. Change the security level to "Medium. " If this does not resolve the ...
The web application uses Java to display trends and other monitors. Trends and other monitors cannot be displayed correctly in some network environments (see the figure below), but this can be corrected by changing the settings shown below. Note that...
When launching the web application, the certificate used for the application's digital signature is automatically checked for expiration. If it's taking several minutes, it is possible that the expiration check is failing, regardless of wheth...
On Windows 10, the file association for WAV files is not Windows Media Player. Use the following procedure to change the file association to Windows Media Player. Setting > System Default apps > Choose default apps by file type ...
In the status display area of the upper part of the screen, there is an upper body-shaped icon that you can check for the user lock status. If the user lock icon background is light grey, there is still a system administrator who can log in. Log...
Yes. One unit of the GX60 I/O base unit is functionally equivalent to the following. GM90PS power supply modules: 1 GX90EX I/O expansion modules: 1 GM90MB module bases: 7 However, note that the operating temperature range becomes 0–50&de...
The SD memory card must be formatted according to the standard established by the SD association (https://www.sdcard.org/home). If using a PC to perform the formatting, use the SD card formatter software available from the above SD association. ...
Yes. However, a firmware upgrade may be necessary depending on the time of purchase.
Yes, this is possible. Install the dedicated program, Mobile WEB Application for GX/GP/GM on the external media SD card. Connect the GM10 and the Wi-Fi router with an Ethernet cable. Wi-Fi supports both Android and iOS. Mobile WEB Application for GX/...
It depends on the PC you are using, but you may be able to prevent the message from appearing by adding the URL of the recorder to "Trusted sites" in Windows Explorer. 1) On the Internet Explorer Tools menu, select Internet Options > Se...
See “[Support Information] List of Verified SD Memory Cards (SD Cards).”
See section 3.2.5, “E-mail Format” in user's manual (IM 04L51B01-01EN). Each of the following email formats are described: Alarm Notification Mail, Periodic Notification Mail, Power Failure Notification Mail, Memory Full Notification ...
1 second. Not available if the recording interval is faster than 1 s.
Yes. However, future waveforms predicted by the future pen function are not for control. Suitable for data with relatively moderate fluctuations. Not suitable for data that fluctuates rapidly.
No, the future pen function is only available when the advanced security function (/AS option) is disabled. The future pen function cannot be used when manufacturing pharmaceutical products or related processes that require Part 11.
No, the future pen function is only available when the advanced security function (/AS option) is disabled. The future pen function does not support Part 11.
Ten channels. Select the target channels from IO, math (/MT option), and communication channels (/MC option).
No, the future pen and future alarm come standard with version 4.08 and later. Customers who have already purchased the GX/GP can use the future pen and future alarm by updating to the latest firmware (free to download/login required). ...

Downloads

Instruction Manuals

동영상

Overview:

Smart user interface, smart architecture, and smart functionality is achieved in the new Yokogawa SMARTDAC+ data acquisition and control product series. The Yokogawa SMARTDAC+ GX and GP are fully integrated measurement, display, and recording platforms equipped with an advanced touch screen operator interface. GX series is a panel-mount design, capable of operating in harsh industrial applications and environments. GP is the portable version of the GX, intended for use in lab and test bench applications.

Overview:

This short video introduces SMARTDAC+ GX20 Data Acquisition Station and demonstrates how quickly we can set the unit up to do measurement and data recording.

Overview:

This short video shows the method of adding input/output modules to the Yokogawa SMARTDAC+ Data Acquisition recording system and how to confirm correct installation.

Overview:

This short video shows the method of configuring alarms on the SMARTDAC+ paperless recorder. In this example setting a high alarm on channel 1 at 25 Deg C.

Overview:

This short video shows the method of configuring group settings in SMARTDAC+ paperless recorder.

Overview:

This short video shows the method of loading a configuration file stored on an SD card into a SMARTDAC+ paperless recorder.

Overview:

This short video shows the method of configuring tag numbers in the SMARTDAC+ paperless recorder.

Overview:

This video shows the capability of viewing information from the 21 CFR Part 11 compliant SMARTDAC+ paparless recorder range on an iOS or Android device

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

Top