Maximizing VSD Efficiency

"Maximizing VSD efficiency by monitoring cable temperature"


Customer Concerns

The importance of VSDs in industrial operations

Variable speed drives (VSD) are used in a wide range of industries to control the speed of machinery such as compressors and pumps. The advantage of VSDs is that they are more energy efficient than conventional fixed-speed drives (gas turbines and the like), and it allows motors to run over speed through the use of frequency control (Hertz).

Overheating of high voltage power transmission cables

When a VSD outputs a high voltage, however, its high voltage power cable can overheat and this can lead to problems such as voltage drops, equipment malfunctions, and fires. The major cause of cable overheating is harmonic distortion.
In many cases, users just select an output voltage based on prior experience, without having accurate information on cable temperature. As a result, they are unable to get optimum performance from their compressors and pumps.

Overheating of high voltage power transmission cables


Image of Industry

The Solutions and the Benefits

Maximizing VSD efficiency by monitoring cable temperature

With its optical fiber sensor cable, the Yokogawa DTSX distributed temperature sensor is able to monitor the temperature of a high voltage power cable accurately and in real time. This solution allows users to dynamically control the VSD voltage output level (Frequency). While maintaining a safe state, productivity can be dramatically improved.
For instance, a Yokogawa customer has set an alarm to sound when the cable temperature reaches 85 degrees Celsius, and has set a maximum VSD operating limit of 90 degrees Celsius. By continually monitoring temperature in real time, this customer has been able to increase natural gas production by up to $120,000 per day per unit.

Cable structure

Even in harsh environments where a power cable is exposed to higher temperatures, the DTSX can provide the information needed to safely and efficiently operate a VSD.

Hot spot monitoring: Early detection of abnormal overheating

The DTSX can accurately monitor the temperature of long optical fiber sensor cables continuously, and with one meter resolution can pinpoint the location of hot spots due to excessive loading. Quick detection helps to prevent fires and unplanned plant shutdowns.


Graph of Hot spot monitoring

Equipment trend monitoring for efficient maintenance

With its ability to monitor temperatures 24/7/365, the DTSX generates the data needed to visualize normal state power transmission cable operating conditions. By comparing this historical data with data that is collected in real time, it is possible to identify when an older power cable no longer is able to perform as specified. This enables not only fire prevention but proactive, condition-based maintenance.

How DTSX Works

Measuring the intensity of Raman scattered light
Using pulses of laser light beamed through an optical fiber cable, the DTSX is able to detect temperature-dependent variations in signal frequency that are the result of a phenomenon known as Raman scattering that occurs along the entire length of the optical fiber cable, and it also can determine the locations of those temperature readings using light that is bounced back (backscattering) to the source.

Example: Along a 6,000 meter optical fiber cable, nearly 6,000 measurement points
By measuring how long it takes light to make a round trip back to the source (backscattering), the DTSX is able to calculate the location for each temperature reading. Abnormalities can be located with a spatial resolution of just one meter.

Temperature monitoring using optical fiber cable​​​​​​

Raman backscattering


  • Oil & Gas

    Yokogawa has a wealth of experience in every part of the oil and gas business, from offshore and onshore facilities to pipelines, terminals, and deepwater operations. We provide solutions that enhance safety, ensure accurate and reliable operation, and increase plant efficiency.

    See More

Related Products & Solutions

  • DTSX200

    • DTSX200 distributed temperature sensing
    • Short range, low sampling resolution capable product
    • Measurement range up to 6km
    • 0.1 °C temperature accuracy
    • 19" rack 
    See More
  • DTSX3000

    The DTSX3000 is the long range, high accuracy product, with a measurement range of up to 50km, a temperature accuracy of 0.01 °C, and 19" rack design.

    See More

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.