Instruments and Solution for Iron & Steel Industry

Challenges in the iron & steel plant

To technology in iron & steel industry is continuously improved to obtain the best possible performance. The improved plant performance gives rise to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

The control systems and field instruments are working at the various processes of the iron and steel plant. The process of iron and steel plant is starting from Sinter plant, Coke oven etc, and the blast furnace, iron pre-treatment are following. The products are widely used at furnace control and utilities in important processes (such as continuous casting machine (CCM)) in down stream of iron / steel making process.

Improve combustion efficiency and product quality

The temperature of the hot blast used in blast furnace has been increasing every year and currently stands at around 1300°C. Under such circumstances efficient operation is achieved by such measures as increasing the calorie value of fuel gas and recovering waste heat from gas. To further improve combustion efficiency and save energy, measurement of the oxygen concentration in exhaust gases is required.

A furnaces for heating slabs needs to be operated under low-oxygen conditions at high temperatures of 1000°C and above to prevent oxidation of the steel. The measurement of oxygen concentration in the furnace is essential.

Why buy Yokogawa?

Blast furnace and it's peripherals such as hot stoves, PCI (Pulverized coal injection), TRT (Top pressure turbine), etc. is the most important area in steel factories where Yokogawa delivers best performance. We have much experience in the area of instrumentation of not only the area but also all iron and steel process. The reliable and high quality measurement & control with Yokogawa's field-proven sensors and controllers helps the process optimization, and efficient/ safe/ reliable plant operation at low cost, and supports to achieve the dual aims of quality production and environmental protection through the field proven technologies.

Furnace Body Cooling

Furnace Body Cooling

Overview and Problems

  • Drum pressure control and drum water level control
  • Monitoring of circulation water flow
  • Enlarge the maintenance period and save the maintenance cost

Solution

  • Field proven silicon resonant sensor guarantees long term stability
    EJA: 0.1 % of URL 5 years
    EJX: 0.1 % of URL 10 years
    Under all conditions (temperature, static and over pressures)

Benefits

  • Improvement of a maintenance period
  • High stability and High reliability
  • Reduction of a maintenance cost

 

Monitoring of Cooling Water

Monitoring of Cooling WaterOverview and Problems

  • Tuyere water leakage detection system (BF)
  • Secondary cooling water flow control (CCM)
    -Intermittent control
    -Mist spray control

Solution

  • Adhesion diagnosis function
    -Replaceable electrode structure
  • High quality and High performance
    -Accuracy: ±0.35 % of Rate (V = 0.15 ~ 10m /sec)
    (0.2 % of Rate is available as an option)
    -Repeatability: ±0.1 % of Rate (V ≥ 1m /sec)
  • High noise suppressor and Quick response

Benefits

  • Informs the timing of the maintenance of the electrode
  • Safety operation
  • High-quality steel producing

 

Monitoring and Controlling of Steam Flow and Temperature

Monitoring and Controlling of Steam Flow and TemperatureOverview and Problems

  • Renewal demand for obsolete instruments <YS><DXA>
  • Need centralized data monitoring <YS><DXA>

Solution

  • Colour LCD display with a wide variety of screen including meter display <YS><DXA>
  • Expanded network function <YS><DXA>
  • Control output backup function <YS>
  • Display and operation <DXA>
    -Custom display function
    -Display and prints report from a web browsing
    -Review historical data with calendar search function

Benefits

  • Perform safe and stable control at low cost <YS>
  • DCS backup application <YS>
  • Less engineering for replacement <YS>
  • Create more intuitive overview monitors by customized display <YS>

Manufacturing Processes of Steel

 

Zirconia Oxygen Analyzer

Zirconia Oxygen AnalyzerOverview and Problems

  • Energy loss from air leak in sintering furnace
  • Combustion control in coke oven, hot blast stove, blast furnace and heating furnace
  • Prevent oxidation of the steel in heating furnace

Solution

  • Air leakage detection
  • Measuring and adjusting oxygen concentration in the exhaust gas
  • Monitoring oxygen concentration in heating furnace

Benefits

  • Save energy and improve the efficiency of sintering furnace maintaining high quality
  • Improve combustion efficiency in coke oven, hot blast stove, blast furnace and heating furnace
  • Maintain high enough temperature and prevent hazardous condition in blast furnace
  • Maintain high product quality in heating furnace

 

Combustion Control

Combustion ControlOverview and Problems

  • Coke oven gas and blast furnace gas are utilized in various combustion process
  • Continuous and stable measuring is difficult because of dust, tar, naphthalene and so on
  • Pre-treatment to eliminate dust, tar and naphthalene is necessary

Solution

  • Stable measurement by combined YOKOGAWA reliable products and technically effective burner design
  • Sampling system matching process condition

Benefits

  • Accurate calorie measurement improves the heating process efficiency
  • Boost yield and maintain high quality

 

Process Gas Chromatograph

Process Gas ChromatographOverview and Problems

  • Guidance of the total furnace operation
  • Detect abnormal condition

Solution

  • Analyze blast furnace top gas, coke oven gas and mixed gas composition

Benefits

  • Improve the process efficiency and custody transfer

 

Inductive Conductivity Analyzer

Inductive Conductivity AnalyzerOverview and Problems

  • The pickling process removes the contaminants from the metal's surface by using acids without damaging the metal's surface

Solution

  • The acid concentration is monitored and controlled to remove scale and oxide sufficiently

Benefits

  • Maintain the customers' high product quality efficiently enough in the pickling process

     

Technologies Commit Users' Benefits

DPharp Silicone Resonant Sensor

Our Goal

Our shared goal is customer satisfaction through operational excellence.
Yokogawa has brought true innovations to industry. We are committed to ensuring accuracy, reliability, and safety of your production system throughout your business life cycle. Our comprehensive solutions and expertise help you achieve more results with less total costs of ownership. Below key technologies shall aim for your operational excellence.

Dual Frequency Coil Excitation

DPharp Silicone Resonant Sensor

DPharp Pressure Transmitters with digital silicon resonant sensor delivers the maximum benefits from the elasticity of the single crystal silicon material while enhancing sensitivity and repeatability. The properties of the resonators remain constant for a long team. This makes DPharp the ideal pressure sensor for harsh industrial automation environments. DPharp offers the highest stability, repeatability and reliability.

YS1000 Dual CPU

Dual Frequency Coil Excitation

Magnetic Flowmeters measure flow volume based on Faraday's law. The frequecy of excitation current given to coils affects in the measurement accuracy and response time.

Dual Frequency Coil Excitation is Yokogawa's original technology to ensure ± 0.35 % accurate measurement as well as 0.1 second fast response simultaneously. Our signal processing technique enables us to bring the benefits of an AC & DC magnetic flowmeter into a single magnetic flowmeter.

Burner Unit

YS1000 Dual CPU

With dual-CPU construction, manual control capability and display continues even if an abnormality occurs on one of the CPUs. If controller self-diagnostics detects a control circuit failure, the controller can suspend analog/digital output, switch to manual mode and allow manual control by operator. 

Gas Calorimeter Key Technology

Burner Unit

The sample gas burns inside the burner unit and a thermocouple detects the burning temperature increase. The air is introduced from the air inlet and divided to the primary, secondary and tertiary air. The primary and secondary ones are for burning the sample gas and the tertiary is for diluting and stirring the exhaust gas. The sample gas is mixed with the primary air (In case of the low calorie gas, the primary air is throttled), and burnt completely by the secondary air. Then, the combustion temperature generates, and burnt gas is promptly diluted and stirred by the tertiary air. Finally the gas is exhausted out from the top of the detector.

The increased temperature is measured with the difference of the electromotive force between the cold junction point (located at the air inlet) and the hot junction point (inside the mixed diluted exhaust gas). The heating wire wound the burner tip is used for both ignition and preheating (In case of low calorie gas).

 

Industries

  • Iron & Steel

    In the iron and steel industry, it is crucial to improve the quality of not only products but also manufacturing and operation technologies, as well as to address environmental and energy-efficiency issues. Yokogawa helps customers to create the ideal plant and evolves with them for mutual growth.

    See More

Related Products & Solutions

  • ADMAG AXF

    Some specifications of this product was discontinued.

    The AXF magnetic flow meter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field experience. Based on FOUNDATION™ Fieldbus specifications, AXF Fieldbus Magnetic Flow meter models offer more flexible instrumentation.

    See More
  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

    See More
  • YS1310

    The YS1310 Indicator with Alarms is an input indicator that has alarms with two inputs. Two loops can be displayed simultaneously. A high limit alarm, low limit alarm, high-high limit alarm, and low-low limit alarm can be generated for each of the two inputs, and the AND connection or OR connection of arbitrary alarms can be output from a total of 6 contacts.

    See More
  • YS1350/YS1360

    The YS1350 is a manual setter that allows for manually outputting setting signals to controllers and the like. The YS1360 is a manual setter that allows for manually outputting operation signals to operation terminals.

    See More
  • YS1500

    The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose.

    See More
  • YS1700

    The YS1700 Programmable Indicating Controller can be tailored for various applications by running a user program, and offers high reliability thanks to Yokogawa's proprietary technology, user friendliness, and expandability.

    See More

Top