How can we mount the SA11 in the field?

In most cases the SA11 Smart Adapter is mounted directly on the sensor. If the temperature is high the temperature limits of the SA11 Smart Adapter (-30 up to +125°C (-22 up to +257°F)) may require that the adapter be remotely mounted.

Optional in the model code is a universal mounting set (/UM). An extra nut is included with the mounting bracket to allow extra ground wire to be connected if needed.

A WE10 cable is needed to connect the sensor to the Smart Adapter, see below for details.

Related Products & Solutions

Digital SMART SENCOM™ Adapter, SA11

Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.

Liquid Analyzers

Liquid analyzers are used for monitoring process chemistry including water quality, providing process optimization and control.

Process Analyzers

Process analyzers are used to determine the chemical composition or physical properties of substances involved in industrial processes.

SENCOM™ SMART Digital Sensors

Digital or SMART sensors maintain specific measurement and calibration data on an integrated chip along that is an integral part of the sensor. This data can be exchanged between the sensor and either a process transmitter or a laboratory PC using a data management software, like the SPS24.