Reverse Osmosis Filter Monitoring

Introduction

Reverse osmosis (RO) process technology is deployed in many industries. This process uses membrane separation which is one of the most economical means to remove suspended solids from feed water. Listed below are examples of some typical RO applications:

  • Pretreatment for deionizers for ultra pure water, typically used in the semiconductor industry
  • Production of zero-hardness water used for boiler feed water
  • Treatment of sanitary waste
  • Water purification

The RO function is accomplished by differential pressure across an array of filters. High pressure is applied to the raw water side of the filter that creates sufficient differential pressure across the filter enabling flow of the filtered water to the low-pressure side of the system.

Plant with Filter arrays and Storage tank

 

Expected benefits

  • Accurate differential pressure measurement is key to filtered water quality.
  • Transmitter range flexibility reducing inventory with fewer models required for RO system designs.
  • Robust Transmitter design delivering stable output under demanding process conditions.
EJA110E Differential Pressure Transmitters

Challenges

In this semiconductor factory they produce their own deionized water. A cellulose acetate membrane removes dissolved solids from the filtered raw water. Differential pressure values are the key factor determining filter maintenance intervention for cleaning or replacement of filter components.

Application requirements:

  • Pressure transmitter must have accurate measurement.
  • Pressure transmitter able to withstand plant vibration with more reliable performance than Pressure switches traditionally used.
  • Pressure transmitter to deliver long term stability regardless of harsh process conditions of pressure surges and fluctuations that caused zero-point shift and drift with other transmitter brand’s previously used on site.
  • Reduce maintenance activities and costs where possible.

 

Solution

EJA110E medium range unit was chosen to cover the measurement range 0 to 30 kPa (0 to 120 inH2O). The client focused on 0.055 % accuracy of capsule span, superior long-term stability (≤± 0.1 % @ 16 MPa, 2300 psi) and vibration tolerance.

Static pressure transient test data

【Static pressure transient test data】
Model: EJA110E M capsule with set range -2 to 2 kPa
Applied static pressure change: 500 kPa in 0.1 Sec

With sudden static pressure changes, the output from EJA110E responds stably and keeps zero every time.

 

Conclusion

DPharp EJA110E exhibits exceptional stability. Trial results from an EJA110E on this RO process that was evaluated over 6 months presented no zero drift or shift. Maintenance crews were relieved with no maintenance intervention or action required during the evaluation period. The EJA110E consistently delivers accurate and stable measurement of process conditions under real world conditions, resulting in better process efficiency and less maintenance downtime.

Looking for more information on our people, technology and solutions?

Contact Us

Industrias

  • Water & Wastewater

    Water resources are finite, and therefore contributing to a sustainable water cycle is one of the Sustainable Development Goals (SDGs). Yokogawa has been providing advanced digital control solutions for the stable supply of clean and safe water, wastewater treatment for protecting the water environment, water loss management and optimization of plant operation for reducing CO2 emissions and running costs. With our leading-edge technologies, dependable products and extensive expertise and experience of diverse water projects around the world, we work with you to provide sustainable water solutions that boost your business and add value throughout the plant lifecycle.

    Yokogawa supports a wide range of water control applications in both the municipal and industrial water markets.

      

     

    Leer Más

Productos y Soluciones Relacionadas

  • EJA110E

    Standard Traditional-mount Differential Pressure Transmitter based on the EJA-E Series.

    Leer Más
  • EJA115E

    Standard Differential Pressure Transmitter attached to an IFO assembly based on the EJA-E Series.

    Leer Más
  • EJA118E

    Standard Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJA-E Series.

    Leer Más
  • EJA120E

    Standard Traditional-mount Differential Pressure Transmitter designed for Draft Range applications based on the EJA-E Series.

    Leer Más
  • EJA130E

    Standard Traditional-mount High Static Differential Pressure Transmitter based on the EJA-E Series.

    Leer Más
  • EJA210E

    Standard Flange-mounted Differential Pressure Transmitter designed for Liquid-level applications based on the EJA-E series.

    Leer Más
  • EJA310E

    Standard Traditional-mount Absolute Pressure Transmitter based on the EJA-E Series.

    Leer Más
  • EJA430E

    Standard Traditional-mount Gauge Pressure Transmitter based on the EJA-E series.

    Leer Más
  • EJA438E

    Standard Gauge Pressure Transmitter with Remote Diaphragm Seal based on the EJA-E Series.

    Leer Más
  • EJA440E

    Standard Traditional-mount High Gauge Pressure Transmitter based on the EJA-E Series.

    Leer Más
  • EJAC60E Hygienic Adapter System (Fluidless Type)

    Yokogawa introduces Fluidless series – EJAC60E Hygienic Adapter System (Fluidless Type).
    This system composes of replaceable adapters(16 adapters in total) with hygienic function of pressure detection.
    Suitable for various kind of process including hygienic connection.

    Leer Más
  • EJX110A

    Traditional-mount Differential Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX115A

    Differential Pressure Transmitter attached to an IFO assembly based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX118A

    Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX120A

    Traditional-mount Differential Pressure Transmitter designed for Draft Range applications based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX130A

    Traditional-mount High Static Differential Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX210A

    Flanged-mounted Differential Pressure Transmitter designed for Liquid-level applications based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX310A

    Traditional-mount Absolute Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX430A

    Traditional-mount Gauge Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX438A

    Gauge Pressure Transmitter with a Remote Diaphragm Seal based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX440A

    Traditional-mount High Gauge Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX510A

    In-Line Mount Absolute Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX530A

    In-Line Gauge Pressure Transmitter based on the EJX-A Series as a high performance model.

    Leer Más
  • EJX610A

    High Performance In-Line Mount Absolute Pressure Transmitter based on the EJX-A Series.

    Leer Más
  • EJX630A

    In-Line Mount High Performance Gauge Pressure Transmitter based on the EJX-A Series.

    Leer Más
  • EJX910A

    This transmitter precisely measures differential pressure, static pressure, and process temperature; then uses these values in a high-perfomance on-board flow computer to deliver fully compensated Mass Flow.

    Leer Más
  • EJX930A

    Designed specifically for high static pressure applications, this transmitter precisely measures differential pressure, static pressure, and process temperature; then uses these values in a high-perfomance on-board flow computer to deliver fully compensated Mass Flow.

    Leer Más
  • EJXC40A (Digital Remote Sensor)

    Digital Remote Sensor (DRS) Transmitter connects two pressure sensors, primary (high-pressure side) and secondary (low-pressure side) in a remote location, with DRS dedicated communication cable to measure differential pressure.

    Leer Más
  • Absolute Pressure

    Absolute Pressure transmitters compare a pressure relative to Absolute pressure. Absolute pressure is always a positive value.

    Leer Más
  • Differential Pressure

    Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.

    Leer Más
  • Draft Pressure

    Draft Pressure transmitters are a unique type of differential transmitter that is designed to measure small differences in very low static pressure environments.

    Leer Más
  • Liquid Level

    Accurate level readings are essential to the safe, reliable, profitable operation of your plant. Liquid Level transmitters measure differential pressure to infer the level in a vessel.

    Leer Más
  • Low Flow

    Using Bernoulli's equation, Differential Pressure transmitters can be used to infer the flow of fluid through a pipe.

    Leer Más
  • Multi-Sensing

    A Multi-Sensing transmitter combines transmitters for Differential Pressure, Gauge Pressure, and Temperature into one field instrument.

    Leer Más
  • Pressure Transmitters

    The accurate and stable measurement of process pressure with Yokogawa Pressure Transmitters supports the safe, reliable, and profitable operation of your plant.

    Leer Más

Top